Glow Writer is a fine-point phosphorescent ink marking pen for making experimental notations and other markings on chemiluminescent and radioisotope-labeled substrate materials (e.g., transfer membranes, dried gels, genomic and proteomic matrices, etc.) being analyzed by X-ray film autography or electronic imaging. The unique marker delivers a phosphor-containing ink through a fine point porous nib. Before exposure to X-ray film, the phosphorescent writing is excited by room light. A phosphor ink having an optimum concentration of phosphor and a relatively short afterglow halflife (approximately 2-3 minutes) has been selected so that upon exposure to X-ray film,autographic exposures of almost any duration will be easily readable on the film. The fine point nib is easily replaceable if it dries out.

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

• Fine Point Nib- Provides fine writing and greater information density
• Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
• No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging

• Permanent, Black Ink.
• Water Resistant.
• Quick Drying.
• Fine Point For Identifying Racks, Vials, tubes, etc

Labmat Bench Liner Rolls & Sheets

White or Biohazard Safety Orange

Disposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills, and wear. Simply roll up and discard after contamination.

• Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive chemicals or radioactive solutions
• Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions
• Available in 50.8cm (20”) wide by 15.2 m (50 ft.) rolls, or 50.8 x 61cm (20 x 24”) pre-cut sheets
• Rolls are easily cut with the Scienceware Safety Cutter® (F21012-0000) or scissors while roll is retained in the dispenser   

Sampling Scoops

BenchBin™ Benchtop Biohazard Bin

Bel-Art Biohazard Bags are available in two formats-plain (unprinted) and with sterilization indicator patch & biohazard warning symbol.

Specifications of Unprinted Bags

• 1.5 mL thick bags made of virgin-grade polypropylene
  
• Translucent without Sterilization Indicator Patch or other writing
  
• Can be autoclaved at 135C (275F)
  
• Available in three sizes: 12" x 24", 24" x 30" and 24" x 36"
• Quantity: 100 per box

Specifications of Printed Bags

Bags are 1.5 mil thick and are made from virgin-grade polypropylene to meet or exceed the Dart Impact Resistance Test requirement of 165 grams per ASTM D1709-98. These bags feature a pre-printed sterilization indicator patch, which darkens when bag is autoclaved. The bags are labeled with the standard biohazard warning symbol and precautionary protocols in four languages: English, French, German and Spanish.

• 1.5 mL thick bags made of virgin-grade polypropylene
  
• Translucent with Sterilization Indicator Patch
  
• Can be autoclaved at 135C (275F)
  
• Available in three sizes: 12" x 24", 24" x 30" and 24" x 36"
  
• Quantity: 100 per box
  
  
  
  

  Catalog Number	Size (in.)	Label
  F13160-0005	12 X 24	Unprinted
  F13161-0005	24 X 30	Unprinted
  F13162-0005	24 X 36	Unprinted
  F13160-0009	12 X 24	Sterilization indicator patch and biohazard warning symbol
  F13161-0009	24 X 30	Sterilization indicator patch and biohazard warning symbol
  F13162-0009	24 X 36	Sterilization indicator patch and biohazard warning symbol

Lab-Sorb converts liquid waste to solid waste for easy disposal

Protect Your Septic- Lab-Sorb can be used at locations connected to septic systems to dispose of liquid waste without pouring them down the drain

Convenient- Included extra durable disposal bags, super absorbant LabSort granuales and a convenient graduated scoop

BioHazard Disposal Aid- Reduces the possibility of spillage or leakage. Put Lab-Sorb at the bottom of your biohazard bin; if a spill occurs simply use Lab-Sorb for safe liquid containment during cleanup.

Quick-Convert liquids to solids in seconds

Adaptable- Apply to any Vol of liquid waste, including 500mL, 600mL, 1L and 2 L vessels. One jar of Lab-Sorb can absorb up to 50 liters of liquid

Versatile- Lab-Sorb granules can rapidly absorb aqueous or mixed aqueous and organic solvent waste

• Solvent Resistant Pens feature an ultra-permanent ink (122 Black and 130 Red only)
  
• Resistant to xylene, alcohol, acetone and formalin
  
• Ideal for histology and cytology
  
• Ideal for use with our CryoTags and Tough-Tags. Markings will not run on frosted/painted labware, even after repeated washes and solution treatments.
  
• Remove markings with acetic acid, an ethanol/xylene mixture or paraffin. Testing advised before use. Results may vary based on surface.

Laboratory Drying Racks

Versatile Drying Rack

• Channels designed for more useful configurations
• Use on counter or mount on wall
• Large and Small pegs for all glassware varieties
• One of a kind Drying Basket to collect small items
• Designed to protect against breakage
• Peg angle allows for better hold - especially large, heavy pieces
• Patent Pending SureGrip Hook securely grips glassware into place
• Holds up to 77 lbs
• Rack made of durable, easy to clean polystyrene

• Included:
• 72 Pegs (36 Small Green; 36 Large Blue)
• 2 Drying Baskets
• Drainage Tubing
• Mounting Guide and Hardware

Wire Drying Rack

• Saves glassware from chips and cracks
• Drain and dry test tubes, beakers, flasks, and other labware.
• Place self-standing rack on a table or near a sink, or use hooks to hang rack on the wall
• Holds up to 90 pieces of labware on 18 x 127 mm pins and 72 x 76 mm pins
• Constructed of spot-welded, HDPE-coated steel wire for durability with polystyrene tray and back
• Easily accessible and removable bottom drainage pan