Labcon Tip Top™ Dispenser Caps

• Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
• Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
• Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
• Medical Grade Resins: USP Class medical grade resins and packaging.

Safe Dispensing of Blood Samples
 
Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16 mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.

Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.

The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.

Fits standard 13 x 100 and 16 x 100 collection tubes.

Proudly made in the USA! Click here for more made in America products!
  

Labcon Security Cups for Urine or Specimen Collection

• 100 mL Cups
• Sample spouts may be cut with scissors or pierced with a syringe
• Impact and pressure resistant seal

These security containers are designed to provide secure and reliable tamper-proof seals for specimens in transit or storage. After specimen collection the screw cap is tightened first by hand, then by the special wrench, which engages teeth on the lids rim to create a locked and leak-proof seal. To access the specimen for testing procedures, large or small sample spouts may be cut with scissors or pierced with a syringe. Spouts can be resealed with the large or small plugs and returned to storage for further testing. The impact-resistant, durably constructed, and pressure-resistant seal offers excellent protection during handling and transport. Made of non-reactive polyethylene resin.

Proudly made in the USA! Click here for more made in America products!
  

Measuring Spoons

Perfect for precise aliquoting of beads into tubes, ensuring accurate measurements for experiments. Their fine design allows for effortless dispensing of homogenization beads, making them ideal for lab work that requires meticulous control over bead amounts.

Whether you're preparing samples for homogenization, bead mill processing, or DNA/RNA extraction, these spoons guarantee consistent and reproducible results. Their ergonomic shape and high-quality material ensure durability and ease of use, even in high-throughput environments.   
 

Small Erlenmeyer Flask

Parafilm® M is a semi-transparent, flexible, thermoplastic film with a two-way stretch

• Creates a tight moisture barrier that holds a strong seal and doesn’t release from glassware, despite off-gassing
• Non-toxic and free from plasticizers, primarily composed of polyolefins and paraffin waxes offering good resistance against acids, alkalis, and some organic solvents—use not recommended with acetone, diethyl ether, or tetrachloride
• Reduces the risk of tampered data with a covering that is odorless, colorless and semi-transparent
• Prevents moisture and volume loss due to material composition and tight seal
• Flexible and self-sealing material allows it to cling around irregular shapes and surfaces
• Stretches more than 200% of the original length
• Resistant for up to 48 hours against many polar substances such as saline solutions, inorganic acids, and alkaline solutions
• Two color options available in 2” rolls (natural and purple) for color coding purposes

Permeability

• Oxygen: (ASTM 1927-98) 150 cc/m² d at 23°C and 50% RH
• Carbon Dioxide: (Modulated IR Method) 1200 cc/m² d at 23°C and 0% RH
• Water Vapor: (ASTM F1249-01)
• Flat: 1 g/m² d at 38°C and 90% RH
• Creased: 1 g/m² d at 38°C and 90% RH

Color-coded for easy identification 

Each box is secured with a rust-resistant nickel-plated clasp and hinge pin. Available with either cork or foam lining. Each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Boxes stack securely on top of each other, and are available in blue, green, red, yellow, white, gray, or black. Measures 8.75 x 6.75 x 1.3".

Immunohistochemistry Staining Trays
 

Application

The AT-12 Immunohistochemistry Staining Tray has been designed for immunohistochemistry slide staining in the lab. The 12-slide unit has an integrated dual well design reservoir to hold water below the slides when humidity is needed. The AT-12 is constructed entirely of solid black cast acrylic to block all light from the stained slides. Additional applications include microscopy, cytology, and hematology. Tray can be placed inside 37° C incubator.

• Hold 12 slides

• Integrated dual well reservoir can hold water when humidified storage is needed

• Made from heavy-duty cast acrylic

• Skid-proof rubber feet prevent sliding and facilitate sturdy stacking of trays

• Black or clear lid versions available

 

Durable Construction

Cast acrylic is very durable and highly chemical resistant so this product will provide years of dependable service in the laboratory. The tray is constructed with rubber feet to promote the stacking of the trays to save space and won't allow stacked trays to slip.

Multiple Configurations

Additional staining trays are available including a 12-slide unit with a clear lid and 24 slide units with black or clear lids.

Made in the USA.

 

Perfect for storage or transport 

These heavy-duty, two-piece microscope slide boxes store up to 25 standard slides (3 x 1" or 75 x 25mm). Available with either cork or foam lining. The boxes stack securely on top of each other, and are available in blue, green, red, yellow or white. Measures 5.5 x 3.5 x 1.24".

These disposable plastic cassettes hold tissue specimens during processing and embedding, as well as in storage. Molded from a special high-density polymer, they keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage.

This new model differs by the special hinge holding the base and cover together. This hinge allows cassettes to be opened and closed as often as necessary. The cover can be removed and re-inserted easily without danger of specimen loss.

Available in 11 non-cytotoxic, non-metallic colors.

Each case contains 3 dispenser boxes of 500 cassettes.

HISTOETTE2 Embedding Cassette

Similar to M492 but specially designed to hold biopsy specimens during the embedding process, as well as in a storage cabinet. Anterior writing area is at a 45° angle to make the cassette more suitable to be used with certain types of cassette labeling instruments. Each case contains 3 dispenser boxes of 500 cassettes.

Embedding rings

Embedding rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is poured into the base mold to cement the ring onto the tissue block. The embedding ring securely holds the tissue sample in the microtome chuck adapter for sectioning and then identifies the sample while in storage. Rings are available in different colors. Each case contains 4 dispenser boxes of 250 rings.