Benchmark 2025 St. Patrick's Day Promo!

For a limited time buy one PR1MA™ Vortex Mixer with Multi-Head™
(VM-1005) and get one FREE (VM-1005-VF)!

 

When ordering free product, use item number plus “-VF”

 

See flyer for more details.

 

Free offer with purchase of designated items at listed price. Cannot be combined with other discounts or pricing.

Free item must be of equal or lesser value than the lowest-priced item. Not valid on prior purchases.

Special price applies only to the specified item; no substitutions. Promo valid from 3/10/25 to 4/11/25 or while supplies last.

All terms and conditions apply.

 
PR1MA™ Vortex Mixer with Multi-Head™

• A traditional cup head for general-purpose mixing of conical tubes plus it holds up to 8 microcentrifuge tubes
• Powerful motor for instant vortexing
• Continuous or "touch" operation
• Increased vortexing speed up to 3,400 rpm
• Q-Drive™ technology provides smooth vortexing action 

The PR1MA™ Vortex Mixer is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general-purpose mixing, plus holds up to eight microcentrifuge tubes.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. Increased speed, up to 3,400 rpm produces an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Other features include: “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.
 

Specifications
 

Speed Range	200 to 3,400 rpm
Operating Modes	Touch or Continuous
Operating Temperature Range	+4°C to +65°C
Dimensions	5 x 6.3 x 6.7 in.
Weight	8.4 lb | 3.8 kg
Electrical	115V AC, 60 Hz, 1.5A
	230V AC, 50 Hz, 0.75A
	230V AC, 60 Hz, 0.75A
Warranty	2 years

 
Accessories

Item #	Description
BV1000-FLAT	Vortexer Flat head
BV1000-COMBO	COMBO™  head
BV1000-H15	Horizontal head, for 12 x 1.5 mL
BV1000-H150	Horizontal head, for 4 x 15 mL
BV1000-H500	Horizontal head, for 2 x 50 mL

  

PR1MA™ Vortex Mixer

• Powerful motor for INSTANT vortexing
• Continuous or “touch” operation
• Q-Drive™ dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories

The PR1MA™ Vortex Mixer sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the PR1MA™ Vortex Mixer provides smooth instant vortexing of even the largest sample sizes, including full 50 mL tubes. The unique counter-balance system creates maximum vortexing action while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer-lasting operation.

Other features include “no-walk” suction feet, cold room/incubator compatibility, and spill-proof electronic controls.

Specifications

Benchmark 2025 St. Patrick's Day Promo!

For a limited time buy one Green PR1MA™ Mini Vortexer
(VM1-G) and get one FREE (VM1-G -VF)!

 

When ordering free product, use item number plus “-VF”

 

See flyer for more details.

 

Free offer with purchase of designated items at listed price. Cannot be combined with other discounts or pricing.

Free item must be of equal or lesser value than the lowest-priced item. Not valid on prior purchases.

Special price applies only to the specified item; no substitutions. Promo valid from 3/10/25 to 4/11/25 or while supplies last.

All terms and conditions apply.

PR1MA™ Mini Vortexer

• Powerful vortexing for tubes up to 50 mL
• Pressure activated operation
• "Mini-sized", less than 4 inches wide

Powerful is the best word to describe the PR1MA™ Mini Vortexer. With a 4 mm orbit and fixed speed of 2,800 rpm, it instantly vortexes even the largest samples, including nearly full 50 mL tubes. Despite its powerful motor, the Mini Vortexer has a footprint of less than 4 x 4 inches, allowing it to fit on even the most crowded lab bench.

Pressure-activated operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet, and efficient. When pressure is removed operation immediately ceases. The unique design prevents liquids from entering the housing, prolonging motor life.

Specifications
 

Speed	2,800 rpm
Orbit	4 mm
Motor Activation	Pressure activation
Dimensions (W x D x H)	3.7 x 3.9 x 2.6 in.
Weight	1 lb.
Electrical	Universal voltage, 100-240 V, 50-60 Hz, 0.7 A
Warranty	2 years
Operating Temp.	+4 to 45°C

 

PR1MA™ V2 Vortex Mixer

• Reversible top platform, cup, or flat-dimpled surface
• Powerful motor for INSTANT vortexing
• Continuous or touch operation
• Q Drive dynamic balancing system
• Variable speed from 200 to 3200 rpm
• Wide variety of accessories, for tubes up to 50 mL

The PR1MA™ V2 Vortex Mixer utilizes a smooth and powerful mixing technology, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally be preferred. However, for applications requiring a flat/dimpled surface for mixing uniquely shaped vessels (or a handful of multiple test tubes), the head can easily be flipped over and reattached in reverse orientation.

The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient, and longer lasting operation. With a maximum speed up to 3,200 rpm, the mixer provides an instant vortex of even the largest sample sizes, including full 50 mL tubes.

Specifications

• Heated lid prevents condensation
• Accepts plates up to 40 mm high
• Independently control time, temperature and speed
• Available in two-plate (IM6002) or four plate format (IM6004)

The new Incu-Mixer MP series is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom plate and the heated lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation. A compact, 2 mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy.

Designed for application flexibility, the Incu-Mixer series is available in two, and four-plate capacities, both capable of accepting all standard plates up to 40 mm high. Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and micro array analysis.

Specifications

Benchmixer™ XL Multi-Tube Vortexer

• Hands-free, high-capacity vortexing
• Up to 2500rpm, a true vortex in every tube
• Assortment of accessories for a variety of tubes, flasks & plates
• Pulsing program for interval mixing
• Fits almost any tube rack

The Benchmixer™ XL is a heavy-duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials, or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to a broad range of vessels and racks. The precisely balanced drive system includes an oversized motor that delivers accurate, reproducible speeds up to 2500 rpm with rattle-free operation and minimal vibration. The programmable pulsing function allows for time-specific interval mixing and increasing agitation.

The 7 x 12 inch platform accommodates a wide variety of standard, pre-drilled tube racks and can be easily adapted to almost any type of vessel commonly found in the laboratory.
Using BenchMixer™ XL is easy-after loading the sample rack and tightening the locking knobs, select the desired speed and run time on the large digital control panel, then press Start. The BenchMIxer™ XL can run unattended for up to 100 hours.
 
BenchMixer™ XL's large capacity and adaptability make it an ideal choice for the medium to high throughput laboratory.

Specifications
 

Speed Range	500 to 2,500 rpm
Max Capacity	6 x 250 mL
Orbit	0.14 In. | 3.6 mm
Timer	1 min. to 99 hr 59 min.
Platform Dims (D x H)	12 x 7 In. | 304.8 x 177.8 mm
Exterior Dims (D x W x H)	15 x 9.2 x 16.5 In. | 381 x 233.68 x 419.1 mm
Operating Temp. Range	4°C to 65° C
Weight	29 lbs. | 13 kg.
Electrical	100 to 240 V, 50 / 60 Hz
Warranty	2 years

 

Item #	Description
BV1010-05	Tube Rack, 96 x 0.5 mL (8 mm)
BV1010-1520	Tube Rack, 96 x 1.5/2.0 mL (10 mm)
BV1010-12	Tube Rack, 50 x 12 mm (included)
BV1010-13	Tube Rack, 50 x 13 mm
BV1010-150	Tube Rack, 50 x 15 mL (16.58 mm)
BV1010-500	Tube Rack, 15 x 50 mL (29 mm)
BV1010-25	Tube Rack, 15 x 25 mm
BV1010-50H	Tube Rack, 9 x 50 mL Horizontal (QuEChERS method)
BV1010-V50	Tube Rack, 6 x 50 mL Volumetric Flask
BV1010-V125	Tube Rack, 6 x 125 mL Volumetric Flask
BV1010-V250	Tube Rack, 6 x 250 mL Volumetric Flask
BV1010-MP	Rack for up to 3 Microplates or 96-well Micro Tube Racks
BV1010-MP02	Carrier for above, 96 x 0.2 mL Tubes or Strips (3pk)

 

LabDoctor^™ is being discontinued. These items are on clearance for your benefit!  

If you would like to purchase other available Mini Vortex Mixers please visit this Mini Vortex Mixers page Or check out our PR1MA™ Mini Vortexer

Valid while supplies last.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

LabDoctor™ Mini Mixer

The Mini vortex mixer is the ideal vortex mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures there is no sacrificing any mixing power.

• Extremely compact and easy operation.
• Powerful vortexing for tubes up to 30 mm.
• The head is made of durable material to ensure a long life.
• The refined steel base is designed to ensure product stability.
• Choice of different colored working heads.

Specifications
 

Speed	3000rpm
Speed Accuracy	± 10%
Oscillation Mode	Circumference Oscillation
Orbital Diameter	Ø4.5 mm (Ø0.18 in.)
Capacity	Max. 80 mL
Max Tube Diameter	≤Ø30 mm (≤Ø1.2 in.)
Ambient Temperature	5~40°C
Power Supply	AC100V-240V / 50Hz-60Hz
Maximum Power	5W
Outside Dimensions (xH)	96x85mm
Weight	0.6 kg (1.2 lb)
IP rating (DIN EN 60529)	IP40

 

• Continuously variable speed for gentle mixing or vigorous vortexing
• Optimized counter balance for minimal vibration
• Touch or continuous operation
• Multiple attachment options
• 1 year warranty

Labnet's new variable speed Vortex Mixer VX-200 provides fast, efficient mixing with minimal vibration. The unit features a true circular orbit that allows for even distribution of vortexing across the entire speed range. The CombiCup® head, supplied with the unit, accepts many different tube sizes. A full range of accessories is available to accommodate most common laboratory tubes and plates.

Multi-Therm™ Shaker

• Two models available: Heat only and Heat/Cool
• Interchangeable blocks for tubes 0.2 mL to 50 mL
• Precision contoured wells for uniform heat transfer

The MultiTherm™ Shaker is a temperature-controlled vortexer useful for a variety of molecular biology applications. Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50 mL tubes. Speed, time, and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety, and sample integrity.

Specifications

• Shake and incubate samples simultaneously
• Complete with platforms for tubes and plates
• Intelligent control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 56 features interchangeable platforms for microtubes and microplates. Both platforms are supplied with the unit. Temperature in the VorTemp 56 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and microplates. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 56 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 56 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

• Large capacity - process 60 microtubes or 4 microplates
• Resuspending, homogenizing, mixing or vortexing
• Sturdy, compact construction
• Suitable for cold room or incubator use
The smallest of the Orbit digital shakers, the M60, P2 and P4 feature variable speed across a broad range, making them useful for a variety of applications. Both time of operation and shaker speed are set and displayed digitally, with their values shown on the large 3 digit LED. Parameters are selected with an easy turn knob. A sturdy base encloses the motor for quiet, vibration free operation. All three models can be used in temperature controlled environments. Their compact size makes them ideal for incubator use.

Orbit P2 Orbit M60 Despite its small size, the Orbit M60 can process up to 60 microtubes at one time. The platform is removable to function as a transfer rack or workstation. 1.5/2.0 ml tubes are accommodated directly while smaller tubes can be used with adapters, sold separately.

Orbit P2 and Orbit P4 These vortexers accept all sizes of standard microplates, including deep well plates. Retaining springs on the contoured steel platform hold samples in place. The Orbit P2 holds two microplates while the Orbit P4 holds four.

Product Specifications
Speed range	100 - 1400rpm
Timer	0 to 99 minutes or continuous
Motion/orbit size	Horizontaly circular, 3mm
Maximum capacity	M60: 60 x 1.5/2.0 ml microtubes
Maximum load	0.66 lb/0.3kg
Ambient operating range	+4° to 65°C
Dimensions (W x D x H)	6.6 x 11 x 6 inches/16.8 x 27.9 x 15.3 cm
Weight	9.5 lb/4.3 kg
Electrical*	120V~, 60 Hz
*Other voltages available upon request

Grant-bio V-32 Vortex Mixer

• Handles up to 32 tubes in three different sizes/combinations
• Additional VP-1 flat head for single tube mixing supplied with unit
• Compact rugged design plus powerful motor delivering consistent performance and quiet operation - fits neatly and unobtrusively into the workspace
• Rubber suction pads hold tight to the work surface and prevent the unit from "walking" - they also absorb vibration and prevent its transmission to the workbench
• Extremely easy to operate - select either "continuous" or "touch" operation and turn the knob to adjust the speed from 500 rpm to 3000 rpm
• The 32-socket universal platform for three tubes sizes (16 x 1.5ml, 8 x 0.5 ml, 8 x 0.2ml) and a tip for mixing individual tubes up to 15ml provide maximum flexibility for different applications.
• Operating temperature range: + 4°C to 40°C

The Grant bio V-32 is a versatile multi-vortex mixer for vigorous re-suspension of cells or chemical pellets in tubes up to 1.5 ml, with the facility to mix individual tubes up to 15 mL.

Applications
Typical applications include intensive stirring of bacterial and yeast cells, extraction of metabolites and enzymes from cells and cell cultures, and various DNA operations such as deproteinization of DNA/protein complexes and purification of low molecular weight DNA/RNA fragments in PCR diagnostics.

Specifications