|◀ 13 - 22 of 22 ▶|
View:

Benchmark Black Friday 2024 Promo!
For a limited time, get $150 off the BenchMixer MP (BV1007)


See flyer for more details.

 

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.
Not to be combined with any offers or discounts. No institutional pricing. All terms apply. 
Use promo code TURKEY24


Benchmark™ BenchMixer™ MP Vortexer

 

The BenchMixer™ MP is optimally designed to thoroughly mix various commonly used sample vessels. With included holders for tubes and plates, as well as a cup head for pressurized/touch vortexing, the BenchMixer MP is a complete package designed to meet the mixing needs of any laboratory. Mixing speed is adjustable from 200 to 3,000 rpm and time can be set up to 999 minutes or continuous. A unique, automatic recognition feature detects the installed sample holder and adjusts the maximum speed setting accordingly. With a compact footprint (only 5 In. wide) and powerful suction cup feet, the mixer conserves bench space and ensures stability during mixing.

  • Accepts a wide range of microplates, including deep well, PCR, Elisa plates, etc.
  • Includes tube accessories for vortexing of 1.5 / 2.0 mL, 15 mL, or 50 mL tubes
  • Converts to a traditional “touch” mode vortexer with included cup head attachment
  • Powerful vortexing at speeds up to 3,000 rpm

Specifications
 
Speed Range200 - 3000 rpm
Timer1 sec - 999 hrs.
Orbit0.12 In. | 3 mm
Dimensions (D x W x H)8.9 x 5.3 x 2.2 In. | 226.06 x 134.62 x 55.88 mm
Operating ModesTouch or continuous
Operating Temp. Range4°C to 65°C
Weight8.8 lbs. / 4 kg
Electrical115V AC, 60 Hz, 1.5 A ; 240V AC, 50 Hz, 0.75 A
 

Item#:
ASBMMPVORTEX

BenchMate VM-D Digital Vortex Mixer

  • Adjustable speed from 300 to 4,200 rpm
  • Digital display - Shows speed and time alternately every 5 secs
  • Unique programmable pulse mode function
  • An orbital diameter of 4 mm
  • Can be used in fume hoods and cold rooms

The Oxford Lab Products BenchMate VM-D Digital Vortex Mixer is one of the most powerful vortex mixers on the market with a 4,200 rpm max speed. The BenchMate VM-D Digital Vortex Mixer also comes with a pulse mode programming feature, allowing scientists to complete more complex and aggressive mixing with one unit. The speed range of this vortex mixer, from 300 rpm to 4,200 rpm, allows for gentle to vigorous mixing.

The BenchMate VM-D has a built-in counterbalance for smooth operation and a three-way switch - touch activate, standby and continuously active - with a status indicator LED. This vortexing unit has a timer setting from 1 to 999 mins. It has optional vortex mixer attachments for microtubes, a microplate or a beaker.

This vortexer has a digital display that shows speed and time alternately every 5 secs. The vortex mixer has user enabled run time and off time settings. The unit has an orbital diameter of 4 mm for optimal vortexing. It can be used in fume hoods and cold rooms for added convenience. Each attachment has a sticker indicator for permissible speed for that attachment.

 

Weight

2.8 kg

Max Load Capacity

500 gm

Pulse mode

Yes, Programmable Pulse

Timer Setting

0-999 mins (min/sec display)

Speed Setting

300-4200 RPM

Dimensions
(W X D X H)

205 x 136 x 138.5 mm

Digital Display

Yes

Motor Type

Brushless DC

Orbital diameter

4 mm

Max Speed

4,200 rpm

Item#:
ASVMDVORTMIX

Mini Vortex Mixers

  • Powerful vortexing for tubes up to 30mm
  • Extremely compact and easy to operation
  • The vortex head is made of durable material to ensure long life
  • A refined steel base is designed to ensure product stability
  • Choice of a different colored working head 

Crystal Technology and Industries’ Mini Vortex Mixer is the ideal Vortex Mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures proper mixing and accurate results.


Specifications for all Mini Vortex Mixers on this page: 
 

NameMini Vortex Mixer
ModelVM-03UA, VM-03RUA,
VM-03PUA, VM-03GUA
Cap ColorBlue, Red, Purple, Green
Speed3000 rpm
Speed Accuracy± 10%
OscillationCircular
Orbital DiameterØ4.5 mm (Ø0.18 in.)
CapacityMax 80 mL
Max Tube Diameter≤Ø30 mm (≤Ø1.2 in.)
Ambient Temperature5~40
Relative Humidity≤80%
Power SupplyAC110 / 60 Hz
Max. Power5 W
Dimensions (Dia × H)Ø96 x 85 mm (Ø3.8 x 3.4 in.)
Net Weight0.6 kg (1.2 lb)
Protection LevelIP21
CertificationsCE, RoHS, WEEE
Item#:
ASMINIVORTEX

Vortex Mixer

  • Universal Head for a wide variety of mixing applications
  • Three operational features: “Touch Control”, “Timed”, and “Continuous Mode”
  • Constant torque within the full range of speed
  • Counterbalance design for minimal body vibration
  • Brushless DC motor drive for long life 

Vortex Mixers are essential research lab instruments used for mixing and stirring in a variety of mixing applications. These mixers are powerful, quiet, and stable.


Specifications: 


ModelVM-01UAVM-02UA
Product NameVortex Mixer with Digital
Timer and Analog Speed
Vortex Mixer with Digital
Timer and Speed
Operation ModeTouch Control, Timed,
or Continuous Run
Touch Control, Timed,
or Continuous Run
Orbital DiameterØ4.5 mm (Ø0.18″)Ø4.5 mm (Ø0.18″)
Speed0~3000 rpm200~3000 RPM
Speed Accuracy±10%±10%
Speed DisplayN/ALED
Timer1 ~ 999 min1~999min
Timer DisplayN/ALED
OscillationCircularCircular
Accessories included
in standard Packaging
1 x VMA01 (Single Tube Head)1 x VMA01 (Single Tube Head)
Single Tube Head
Dimensions
Ø76mm (Ø3 in.)Ø76mm (Ø3 in)
Max Load0.5 kg (1.1 lb)0.5 kg (1.1 lb)
Ambient Temperature5°C~40°C5°C ~ 40°C
Relative Humidity≤ 80%≤80%
Power SupplyAC110 V ± 11V, 60 HzAC110V±11V, 60Hz
Max Power24W24 W
Dimension (W x D x H)155 x 205 x 108 mm
(4.5 x 8.1 x 4.3 in.)
155 x 205 x 108 mm
(4.5 x 8.1 x 4.3 in.)
Net Weight4 kg (8.8 lb)4 kg (8.8 lb)
Protection LevelIP21IP21
CertificationsCECE
 
Item#:
ASVORTEXMIX

Vortexer, Tap Dancer Mini Tube


Features

  • Compact, with low profile and small footprint
  • Pressure sensitive cup
  • Continuous or touch operation
  • Rubber suction pads prevent walking, absorb vibration
  • Low voltage supply for safe cold room use
  • 2 year warranty
Item#:
ASVORTEXTAPMINI

Features

  • Compact, with low profile and small footprint
  • Pressure sensitive cup
  • Continuous or touch operation
  • Rubber suction pads prevent walking, absorb vibration
  • Low voltage supply for safe cold room use
  • 2 year warranty
Specifications
 

Speed

300 to 6000 rpm/continuous or burst
Orbit 2 mm
Tube diameter (maximum) 20 mm
Ambient Operating Temperature Range +4°C to +45°C
Dimensions - inches
 
millimeters
4.13" w x 5.9" d x 3.35 h
105 w x 150 d x 85 h
Input voltage 12 V
Input type dc
Input current 0.5 A
Item#:
270100
Your Price:
273.27
Each

Benchmark™  Scientific QuEChERS Vortex Mixer

  • For use with QuEChERS and other sample prep methods
  • Powerful, hands-free shaking/vortexing
  • Pulsing program for interval mixing
  • Supplied with QuEChERS rack starter kit: 7 x 50 mL tubes, held horizontally 50 x 15 mL tubes, held vertically 50 x 1.5 / 2.0 mL tubes, held vertically

Benchmark's BenchMixer XLQ has been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50 mL tubes held horizontally and 15 mL and 1.5 / 2.0 mL tubes held vertically, it takes the place of traditional manual shaking in these applications.

Multiple samples can be processed simultaneously in the BenchMixer XLQ's large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.

The BenchMixer™ XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6 mm orbit. Time and speed are precisely controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.

Using the BenchMixer™ XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer™ XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.

While the BenchMixer™ XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory (ask for details). Built for heavy-duty use, the instrument carries a 2-year warranty.

*Additional Racks or Replacement Racks available.  Call for details or search our website for the BV1010. 
 

Specifications 

Speed Range500 to 2,500 rpm
Orbit0.14 In. | 3.6 mm
Timer1 min. to 99 hr. 59 min.
Platform Dims (D x H)12 x 7 In. | 304.8 x 177.8 mm
Dims (D x W x H)15 x 9.2 x 16.5 In. | 381 x 233.68 x 419.1 mm
Weight29 lb. | 13 kg.
Electrical100 to 240 V, 50-60 Hz
Warranty2-year
Item#:
ASQUECHERS

BenchMate VM-M Mini Vortex Mixer

  • Speed range from 2,500 to 4,500 rpm
  • Orbital vortexing diameter of 4.5 mm
  • Can be used inside fume hoods and in cold room
  • 100 mm x 100 mm footprint
  • The brushless DC motor provides a more robust and powerful performance

The Oxford Lab Products BenchMate VM-M Mini Vortex Mixer enables scientists to perform powerful vortexing anywhere in the lab. With a 100 x 100 mm footprint and a 4,500 rpm max speed, the BenchMate VM-M Mini Vortex Mixer is one of the most powerful mini vortexers on the market. The robust construction with a die-cast aluminum base ensures durability of the product and a long product lifespan. The suction cups add stability to the unit. These cups also reducing the minimal sound and vibration for extremely quiet operation.

This BenchMate VM-M Mini Vortex Mixer has a speed range from 2500 to 4,500 rpm for thorough mixing & quick vortexing applications. The vortexing orbital diameter is 4.5 mm for optimal vortexing of solutions in common lab vessels.

This mini vortex mixer can be used inside fume hoods and in cold rooms, for added versatility. The unit weighs 0.55 kg. The smart and robust design includes press activation of the vortexing action with a suspension system. The unit delivers set speed, even under varying load conditions, using microprocessor technology.

The BenchMate VM-M Mini Vortex Mixer is equipped with a silicon cup that is easy to clean for added convenience. The brushless DC motor provides a more robust and powerful performance.

 

Weight

0.55 kg

Dimensions
(W X D X H)

100 x 100 x 67 mm

Protection class

IP 43

Speed Setting

Fixed / Adjustable

Press activation

Yes

Max Load Capacity

100 gm

Max tube diameter

30 mm

Timer setting

No

Variable speed

No

Motor type

Brushless DC

Orbital diameter

4.5 mm

Max RPM

4,500 rpm

Item#:
ASVMDVORTMIXMINI

Grant-bio Vortex Mixer

  • Pressure sensitive cup accommodates tubes up to 20 mm diameter
  • Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range
  • Extremely easy to operate - select either "continuous" or "touch" operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm
  • Exceptionally compact with a low profile and small footprint - fits into almost any location
  • Rubber suction pads hold tight to the work surface and prevent the unit from "walking" - they also absorb vibration and prevent its transmission to the workbench

Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand - yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet.

With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5 mL, 1.5 mL, and 15 mL tubes.



Specifications

Dimensions (h x d x w)

80 x 150 x 90 mm

Ambient temperature range

+4 to 40°C

Orbit ø

4 mm

Speed

750 to 3000 rpm

Capacity

0.2 up to 50 mL tube

Maximum tube diameter

28.5 mm*

External power supply

Input AC 120-230 V, 50/60 Hz Output DC 12 V

Power consumption

3.8 W  (0.32 A)

Input voltage

12 V dc

Weight

0.8 kg

Item#:
ASPV1VORTEX
with 15mL and 50mL Tube
  • Shake and incubate samples simultaneously
  • Complete with shaking racks for 15ml and 50ml conical tubes
  • Intelligent, digital control
  • Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.


Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.


A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.


The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

Product Specifications
Temperature range Ambient +5° to 100°C
Temperature accuracy ±0.5°C
Speed range 200-900 rpm
Motion/orbit Horizontally circular/3 mm
Capacity 8 x 50ml / 18 x 15ml
Dimensions (W x D x H) 8.9 x 12.3 x 13 inches/22.5 x 12.3 x 33 cm
Weight 26 lb/11.8 kg
Electrical* 120V or 230V, 50/60 Hz
Item#:
S2050A
Your Price:
5357.47
Each
|◀ 13 - 22 of 22 ▶|
View: