SmartWasher 96 Microplate Washer
  • Precision Control of Aspiration Needle Position
    • Accurate to 0.1 mm
    • Minimal residual liquid
  • Auto rinse function eliminates cross contamination
  • Up to 100 wash protocols can be customized and stored
  • Liquid level sensors in wash and waste bottles
  • Wash protocols can be transferred via flash drive

The SmartWasher 96 provides flexibility by accepting full plates, partial plates, and strips with U, V, C, or flat bottoms. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dis­pense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3" LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher 96 and recalled when needed or transferred between machines with a flash drive.

The washer comes with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs.

8- and 12-channel wash heads are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination.

The SmartWasher 96 is the perfect partner for the SmartReader 96 Microplate Absorbance Reader as well as other popular readers.


Wash Heads

1 x 8 or 1 x 12

Plate Types

Flat, U, V, or C bottom

Washing Volume

50-2000 μL, in 50 μL increments

Dispensing Accuracy

≤2% @ 300 μL

Dispensing Precision

CV ≤1.5% @ 300 μL

Aspiration Modes

Single, two, and three points

Residual Liquid

≤1 μL

Soaking & Shaking Time

1 second to 99 minutes

Shaking Speed

Slow, medium, fast

Bottle Capacity

4 x 2.5 L, 2 wash, 1 rinse, 1 waste

Data Connection

USB for flash drive

Dimensions (W x D x H)

13.6 x 18.11 x 7.87 in


12 kg / 26.4 lbs


110-240 VAC, 50/60 Hz


CappWash plate washer is an ideal elisa plate washer for small scale work. Simple, compact and inexpensive. Fitting into even the tightest budget, Capp plate washer is a perfect alternative to dependence on department washers for washing micro plates and strips. Capp elisa plate washer works most effectively with a vacuum source.

Capp elisa plate washer requires no programming nor electrical wiring connections. It is made of a high-grade stainless steel and polypropylene, making it fully autoclavable and highly resistant to aggressive chemicals.

The unique Two-in-One Design of Capp elisa plate washer gives each tube 2 functions - delivery of the washing solution to the well and aspiration of the used solution back to the waste collection bottle. This is possible as each tube of Capp elisa plate washer consists of an inner tube that releases the distilled water washing solution into the wells for rinsing while the outer tube vacuums away the liquid upon completion of the washing procedure.

The washing process with Capp plate washer is as simple as it can be: Simply lower the tubes into the well then push the knob to fill and release the knob to empty. Now repeat for the desired amount of washings and move on to the next row.

Capp elisa plate washer is suitable for all well types. The plate washer can be set to the desired depth very easily by simply adjusting the two screws found on either side of the tubes

    • Easy to operate
    • Simple & robust design
    • Manual ELISA plate washer

    W-12 - CappWash plate washer 12-channel

    W-12KIT-115V - CappWash Kit including W-12, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    CAPPWash Kit includes 12-channel plate washer, vacuum pump, wash-collection bottles and tubing. CAPPWash Microplate Washer is the ideal tool for small scale immune assays. Fitting into even the tightest budget, CAPPWash is a perfect alternative to dependence on department washers for washing microplates and strips.

      • Easy to operate
      • Simple and robust design
      • Fully autoclavable

    W-16KIT-115V- CappWash Kit including W-16, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    W-16KIT-230V - CappWash Kit including W-16, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)


STAT FAX 2600 Microwell Plate Washer

The Stat Fax® 2600 is a microprocessor-controlled automatic microplate washer that accepts many types of standard microplates and micro strip trays. The instrument will accept microwells having flat-, round-, or V-bottom configurations. It automatically accommodates partially filled micro strip trays. Plates may be washed in the A to H direction (8 strips of 12 wells each) or in the 1 to 12 direction (12 strips of 8 wells each) depending upon the plate orientation in the carrier and the number of wash probes on the head. Instruments are available with user changeable wash heads. The 8-wash head is standard; 12-wash head is available as optional accessories.

The instrument is fully programmable to provide multistep combinations of dispense, aspirate, combined aspirate/dispense, and timed soak cycles. Each user-programmed test can have up to 20 steps, and the instrument is capable of storing approximately 50 separate tests in non-volatile memory. As a convenience feature, the instrument can be programmed to automatically perform a rinse operation at a particular time of day. The instrument may also be used in the direct mode whereby wash operations are selected via the built-in keypad. A feature allowing user-assigned well depth may also be used, if preferred to the automatic well sensing feature. For volumes larger than the capacity of the wells, or to reduce bubbles, a top-wash feature is included so the wash solution may be aspirated off the top as it is being dispensed.

In addition to the 8-probe combination dispense/aspirate wash head, each instrument is supplied with wash, rinse, and waste bottles utilizing integral electronic level sensors, and an aerosol shield. A stainless steel bottle rack is available as an optional accessory.



8/12 probe microplate transport accepts flat,

round, or V-bottom wells, plates & strip trays;

8 probe aspiration and dispense head (12 probe

wash head optional)

Stainless steel plate bed

Transparent acrylic aerosol shield


13.5" W x 16" D x 7.5" H (34.3 cm W x 40.6 cm D x 19 cm H)

Weight 18.5 lbs (8.39 kg)

Bottle Assembly:

One each Wash, Rinse and Waste bottles with

electronic level sensing on all bottles (2 Wash

Bottle option available); 13.5" W x 5.5" D x 10.5"

H ( 34.3 cm W x 14 cm D x 26.7 cm H)


Residual (double aspiration):

3 μl per well

Dispense precision:

3% C.V. across 96 wells

Dispense accuracy:

Mean volume ± 3% from reference

Test Storage:

Approximately 50