View:

For a limited time, purchase any Bullet Blender Gold+, Storm Pro, or 50 DX+ Models,

(Item # BB50AUP, BB5EAUP, BB24AUP, BT5E, BT24M and BB50DXP)

And get two free RINO Bullet Blender Navy Bead Lysis kits FREE

*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits

 

Promo is valid from 09/16 – 12/31/2024

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.
 

Bullet Blender® Gold+ Homogenizers

The Bullet Blender® Gold for tougher tissue/cell samples (mouse femur, tumor, and skin) now is dry ice compatible, eliminating sample heating during homogenization. All samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample. There are no probes or blades to cause cross-contamination or sample loss, which also means there are no parts to clean between runs!

  • Available with CE certification
  • Made in the USA
  • Can be used in temperatures ranging from 4°C to 40°C. Altitude: < 2000 m
  • Storage Temperature: -40°C to 50°C
*avoid condensation, which will damage electronics and void the warranty

Bullet Blender® 50 Gold+ (BB50AUP)

Our largest dry-ice-cooled homogenizer. Can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL HIPPO™ tubes in parallel.


Includes
:

  • Pack of 20, 50 mL HIPPO™ tubes
  • 2 Packs of 4 sleeves (8 sleeves in total)
  • Wholly scooper (to scoop dry pellets without the powder)
  • 12V DC Wall Plug Power Cord
  • Basic Starter Kit:
    • Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
    • 500 uL microspoon and 1.2 mL spoon

Bullet Blender® E5 Gold+ (BB5EAUP)

Homogenizer for tissue or cell cultures. Can process up to 12 samples in parallel, each sample up to 1 g each in a 5 mL Eppendorf® tube or in * 1.5/2 tubes using the tube adapters (purchased separately).

Includes:

  • Pre-filled 5 mL GATOR™ snap-cap tubes with beads, 3 each (Pink, Red, Green, and Navy)
  • 25 Pack of 5 mL GATOR™ snap-cap tubes
  • Wholly scooper (to scoop dry pellets without the powder)
  • 24 V DC power supply
  • Basic Starter Kit:
    • Bead Sample Pack: 10 mL samples of 9 different bead types.

Bullet Blender® 24 Gold+ (BB24AUP)

Homogenizer for 24 0.3 g samples in microcentrifuge tubes with a very powerful motor. Used with 1.5 mL GATOR™ snap cap Tubes.
 

Includes:

  • Contact plate for use with GATOR™ Tubes
  • 40 Pack of 1.5 mL GATOR™ snap cap Tubes
  • Wholly scooper (to scoop dry ice pellets without the powder)
  • 24 V DC power supply
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of eight different bead types.
    • Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 50 Pack of 1.5 mL RINO® screw-cap tubes

Limited Time Promo!

For a limited time, purchase any Bullet Blender Gold+, Storm Pro, or 50 DX+ Models,

(Item # BB50AUP, BB5EAUP, BB24AUP, BT5E, BT24M and BB50DXP)

And get two free RINO Bullet Blender Navy Bead Lysis kits FREE

*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits

 

Promo is valid from 09/16 – 12/31/2024

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.
 

Bullet Blender® 50DX+

 

Extra-powerful Bullet Blender® 50DX homogenizes better and faster. Processes up to 4 tough tissue samples or up to 8 soft samples in parallel. Each sample can be up to 3.5 g of tissue or 3.5 mL of pelleted cells combined with a buffer of up to 20 mL. Use HIPPO™ brand 50 mL self standing tubes with plug seal cap. 

Air cooling™ minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.

 

Includes:

  • 20 Pack of 50 mL HIPPO™ tubes
  • 2 Packs of 4 sleeves (8 sleeves in total)
  • 12 V DC Wall Plug Power Cord
  • Basic Starter Kit:
    • Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
    • 500 uL microspoon and 1.2 mL spoon

For a limited time, purchase any Bullet Blender Gold+, Storm Pro, or 50 DX+ Models,

(Item # BB50AUP, BB5EAUP, BB24AUP, BT5E, BT24M and BB50DXP)

And get two free RINO Bullet Blender Navy Bead Lysis kits FREE

*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits

 

Promo is valid from 09/16 – 12/31/2024

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.


Bullet Blender® Pro Homogenizers

Homogenize your toughest samples (mouse femur, skin, tumor, etc.) in just minutes. Air cooling™ minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.
 

Bullet Blender® 5E Pro (BT5E)

Our most powerful homogenizer! Process up to 12 samples at a time in 5 mL GATOR™ tubes and * 1.5 / 2 mL Tubes w/ adapter. Great for tough samples up to 1 g in size.

Includes:

  • 24 V 3.75 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 10 mL samples of 9 different bead types
    • 100 uL and 500 uL microspoons
    • Pre-filled 5 mL GATOR™ snap cap tubes with beads, 3 each (Pink, Red, Green, Navy)
    • 25 Pack of 5 mL GATOR™ snap cap tubes 

Bullet Blender® Storm Pro (BT24M)

Quickly homogenize up to 24 of your toughest samples. Uses 1.5 mL RINO® screw cap tubes or 1.5 mL GATOR™ snap cap tubes.

 Includes:

  • Contact plate for use with 1.5 mL GATOR™ snap cap tubes
  • 40 Pack of 1.5 mL GATOR™ snap cap tubes
  • 24 V 2.5 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of 8 different bead types
    • 100 uL microspoon
    • Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 50 Pack of 1.5 mL RINO® screw cap tubes

Bullet Blender® Lite (BT12LT)

The all new Bullet Blender® Lite can homogenize up to 12 samples. Uses 1.5 mL GATOR™ snap cap tubes. Can accommodate 1.5 mL RINO® screw cap tubes *with the purchase of an adapter.

 Includes:

  • 24 V 2.5 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of 8 different bead types
    • 100 uL microspoon
    • Pre-filled 1.5 mL GATOR™ snap cap tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 40 Pack of 1.5 mL GATOR™ snap cap tubes   

BeadBug™ 6 Homogenizer

The BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments.

Simultaneous homogenization of up to 6 samples takes place (often within 45 seconds) inside the disposable 2 mL screw cap microtubes. The optimized mixing motion causes rapid cell disruption through constant high velocity impact from the hardened micro-beads chosen specifically
for your sample type.

Developed for samples too tough to be homogenized in a common lab vortexer, the BeadBug™ provides a convenient and economical alternative to the traditional, over-priced homogenizers on the market today. With up to six tube capacity and a footprint of just 9 x 14 in., the BeadBug™ is
the ideal homogenizing instrument for low to medium throughput laboratories.

Specifications  

Speed Range2500 to 4350 rpm
Capacity6 x 2 mL or 2 x 5 mL (required optional adapter)
Cycle Time1 to 90 sec. (up to 90 sec.)
Pause between cycles0 to 90 sec. (1 sec. increments)
Max, cycles per program10
Program Memoryup to 50
Noise Level<65 db
Timer1 sec to 90 sec with up to 10 cycles
Dimensions (D x W x H)8.6 x 14 x 8 In. | 22 x 35.5 x 20.5 cm
Weight20 lbs | 9 kg

 

Item#:
ASBEADBUG1

Benchmark Black Friday 2024 Promo!
For a limited time, buy ONE BeadBug Microtube Homogenizer (D1030) and get ONE FREE!



Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

Use item number +"-VF" or promo code TURKEY24


BeadBug™ Microtube Homogenizer

  • Powerful - for mixing, lysis, grinding or homogenization
  • Individual homogenization tubes - avoids cross contamination between samples
  • Multitask - homogenize 1-3 samples simultaneously

The BeadBug™ is a high energy benchtop homogenizer for individualized sample cell disruption to whole tissue homogenization. Simultaneous homogenization of up to 3 samples inside disposable 2ml screw cap microtubes can be optimized for grinding for 3 seconds to 3 minutes. The mixing motion causes rapid disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type.


Developed for samples too tough to be homogenized in a common lab vortexer, the BeadBug™ provides a convenient and economical alternative to the traditional, over-priced homogenizers on the market today. With up to a 3 tube capacity and a tiny footprint of 7x8 in., the BeadBug™ is the ideal homogenizing instrument for low to medium throughput laboratories.

Specifications

Speed Range2800-4000 rpm
Max. Capacity3 x 2.0 mL (Non-Skirt)
Timer3 sec. to 3 min.
Operating Temp. Range+4°C to +65°C
Dimensions6.9 x 8.3 x 5.3 in.
Weight5 lbs.
Electrical115 V,60 Hz or 230 V,50 Hz (add-E to item#)
Warranty2 years


For best results, use with the BeadBug™ pre-filled tube kits: Includes 2.0 mL Non-Skirt Screw Cap tubes with caps, sealing rings and DNase/RNase-free beads as specified below:
 

D1032-SKTriple-Pure Starter Kit, 10 each of 0.1, 0.5, 1.0, 1.5 and 3.0 mm
D1031-01Prefilled 2.0 mL tubes, Silica (Glass) Beads, 0.1 mm Acid Washed
D1031-05Prefilled 2.0 mL tubes, Silica (Glass) Beads, 0.5 mm Acid Washed
D1031-10Prefilled 2.0 mL tubes, Silica (Glass) Beads, 1.0 mm Acid Washed
D1032-01Prefilled 2.0 mL tubes, Zirconium Beads, 0.1 mm Triple-Pure - High Impact
D1032-05Prefilled 2.0 mL tubes, Zirconium Beads, 0.5 mm Triple-Pure - High Impact
D1032-10Prefilled 2.0 mL tubes, Zirconium Beads, 1.0 mm Triple-Pure - High Impact
D1032-15Prefilled 2.0 mL tubes, Zirconium Beads, 1.5 mm Triple-Pure - High Impact
D1032-30Prefilled 2.0 mL tubes, Zirconium Beads, 3.0 mm Triple-Pure - High Impact
D1033-28Prefilled 2.0 mL tubes, Stainless Steel, 2.8 mm, Acid Washed
 

 

Item#:
ASBEADBUG


Beadblaster™ 24 Microtube Homogenizer

  • Fast, efficient homogenization in about 35 seconds
  • For all sample types, from soft tissue to bone
  • Mix up to 24 tubes simultaneously
  • Sealed 2.0 mL tubes-eliminates cross contamination 

The Beadblaster™ 24 completely lyses, grinds, and homogenizes a broad variety of biological samples. Even the most difficult and resistant samples are fully homogenized, often in 35 seconds or less.

 

The stainless steel tube carrier subjects up to 24 samples to an optimized, high-speed, 3D motion, producing high energy impacts between the samples and microbeads that release cellular contents. After homogenization, samples can be centrifuged and the supernatant collected for further processing.

 

Operating parameters for the Beadblaster™ 24 are set and displayed digitally. To protect fragile, heat-sensitive samples, the unit can be programmed to operate in shortened consecutive cycles with a rest period in between. Up to 50 such programs can be stored in memory and recalled for future use. A transparent lid allows for visualization of samples and features a mechanical lid lock that prevents opening when the Beadblaster™ 24 is in operation. A brushless motor reduces motor noise and provides maintenance-free operation. See below for kits for use with the Beadblaster™ 24.
 

Specifications 

 D2400D2400-R
Speed Range4.0 to 7.0 m/s (0.05 m/s increments)
Capacity24 x 2.0 mL
Cycle time1 to 90 sec
Pause between cycles0 to 2 min. (1 sec. increments)
Max cycles per program10
Program Memoriesup to 50
Accel./Decel. Time<2 sec./<2 sec.<4 sec./<4 sec.
Cooling MethodN/ACompressor
Temperature RangeAmbient-10°C
Precool Ambient to 0°CN/A<30 min
Chamber UniformityN/A±2°C
Noise Level<68 db<65 db
Dimensions28x36x38.5 cm32 x 51 x 41 cm
Weight55 lbs/25 kg88 lbs/40 kg
Electrical100 to 240 V, 50-60 Hz
Power600W1,000W
Warranty2 years
Item#:
ASBEADBAST24
for Homogenization


Orange Lysis Kit

 

1.5 mL tubes prefilled with stainless steel beads selected for extracting bacteria or generating single-cell suspensions from tissue samples. RINO tube bead lysis kits are made of high-quality polypropylene and are easy to open and close. These tubes can be used in any current microcentrifuge model Bullet Blender®.

 

DNase and RNase free.

*All colors of GATOR Kits are shipped with red silicone plugs.

 

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.

Contact us for more information.
 
 

for Homogenization


Yellow Lysis Kit

 

Yellow Kits are filled with ceramic beads selected for high-yielding bacterial lysis, small cell suspension, and tough samples. RINO Safe-lock tube bead lysis kits are made of high-quality polypropylene and are easy to open and close. These tubes can be used in any current microcentrifuge model Bullet Blender®.

 

Kits are available in RNase-free or non-sterile versions.

*All colors of GATOR Kits are shipped with red silicone plugs.

 

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.
Contact us for more information. 
 
 

for Homogenization


Pink Lysis Kit

 

Pink Bead Lysis Kits are filled with a mix of zirconium oxide beads for small samples of soft material like liver. These kits work best with buffer volumes between 100 uL and 300 uL. RINO Safe-lock tube bead lysis kits are made of high-quality polypropylene and are easy to open and close. These tubes can be used in any current microcentrifuge model Bullet Blender®.

 

Kits are available in RNase-free or non-sterile versions.

*All colors of GATOR Kits are shipped with red silicone plugs.

 

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.
Contact us for more information.
 
 

for Homogenization


Red Lysis Kit

 

Red Bead Lysis Kits are filled with a mix of zirconium oxide beads, ideal for homogenizing large soft or medium tough samples with buffer volumes between 300 uL and 600 uL. RINO Safe-lock tube bead lysis kits are made of high-quality polypropylene and are easy to open and close. These tubes can be used in any current microcentrifuge model Bullet Blender®.

 

Kits are available in RNase-free or non-sterile versions.

*All colors of GATOR Kits are shipped with red silicone plugs.

 

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.
Contact us for more information.
 
 

for Homogenization


Green Lysis Kit

 

Bead lysis kits for the homogenization of small to medium-tough samples. Tubes are made of high-quality polypropylene and are very easy to open and close. Bead Lysis kits are prefilled with stainless steel beads for buffer volumes between 100 uL and 300 uL, and can be used in any current microcentrifuge model Bullet Blender®. They're excellent for small samples of tougher material such as muscle.

 

Kits are available in RNase-free or non-sterile versions.
*All colors of GATOR Kits are shipped with red silicone plugs.

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.
Contact us for more information.
 
 

for Homogenization


Navy Lysis Kit

 

Extra power for your tough samples. Navy Bead Lysis Kits are filled with a custom mix of stainless-steel beads for buffer volumes between 300 uL and 600 uL. They're great for samples that are too large for a Green Kit and deliver extra homogenizing power for challenging samples like bone, tumors, and hard-shelled insects such as ticks. RINO Safe-lock tube bead lysis kits are made of high-quality polypropylene and are easy to open and close. These tubes can be used in any current microcentrifuge model Bullet Blender®.

 

Kits are available in RNase-free or non-sterile versions.

*All colors of GATOR Kits are shipped with red silicone plugs.

 

Custom kits: Made to your specifications. Need a precise mixture of beads to match your SOP or homogenize an unusual sample? We offer Custom kits.

Contact us for more information.

 

View: