S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsBead sample pack with 8 types of beads for homogenizing soft tissues: 0.5 and 1.0 mm glass beads (GB05, GB10), 0.5, 1.0, and 2.0 mm zirconium silicate beads (ZRSB05, ZRSB10, and ZRSB20), and 0.5, 1.0, and 2.0 mm zirconium oxide beads (ZROB05, ZROB10, and ZROB20). 10 mL of each.
0.9 - 2.0 mm RNase-free stainless steel blend, density is 7.9 g/cc, 4 mL package.
- Wet, dry or cryogrinding
- Accepts a variety of tubes, plates and jars
- Large, digital touch screen control panel
- See-though safety lid
The BeadBlaster™ 96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas, including biological research, environmental testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a variety of materials are available.
Wet homogenization, dry grinding and cryogrinding can all be performed with the BeadBlaster™ 96. The arced motion of the sample holders and powerful motor allow most samples to be processed in 1 minute or less. All parameters are digitally controlled through the large touch screen and 9 programs can be stored in memory.
The safety cover lifts up for easy access to the sample holders and automatically locks during operation. The wrap-around design of the clear acrylic lid allows for visualization during homogenization.
Specifications
Speed Range | 180 to 1800 rpm |
Speed Increment | 100 rpm |
Cycle Duration | 1 sec to 59 min. 59 sec |
Pause | 1 sec to 59 min. 59 sec |
Cycles | 99 |
Programs | 9 |
Dimensions (W x D x H) | 13.19 x 19.68 x 14.37 In. 335 x 500 x 365 mm |
Weight | 141 lbs. | 64 kg. |
Electrical | 120 V, 50 Hz |
Warranty | 2 years |
Ball mill, homogenize, homogenizer, beadblaster, retsch, bead ruptor, quenchers, pesticide, cryogrinding
SSB32-RNA is 3.2 mm RNase-free stainless steel blend beads in a 10 mL package.
For a limited time, purchase any Bullet Blender Gold+, Storm Pro, or 50 DX+ Models,
(Item # BB50AUP, BB5EAUP, BB24AUP, BT5E, BT24M and BB50DXP)
And get two free RINO Bullet Blender Navy Bead Lysis kits FREE
*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits
Promo is valid from 09/16 – 12/31/2024
Not to be combined with any offers or discounts. No institutional pricing. All terms apply.
Bullet Blender® 50DX+
Extra-powerful Bullet Blender® 50DX homogenizes better and faster. Processes up to 4 tough tissue samples or up to 8 soft samples in parallel. Each sample can be up to 3.5 g of tissue or 3.5 mL of pelleted cells combined with a buffer of up to 20 mL. Use HIPPO™ brand 50 mL self standing tubes with plug seal cap.
Air cooling™ minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.
Includes:
- 20 Pack of 50 mL HIPPO™ tubes
- 2 Packs of 4 sleeves (8 sleeves in total)
- 12 V DC Wall Plug Power Cord
- Basic Starter Kit:
- Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
- 500 uL microspoon and 1.2 mL spoon
For a limited time, purchase any Bullet Blender Gold+, Storm Pro, or 50 DX+ Models,
(Item # BB50AUP, BB5EAUP, BB24AUP, BT5E, BT24M and BB50DXP)
And get two free RINO Bullet Blender Navy Bead Lysis kits FREE
*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits
Promo is valid from 09/16 – 12/31/2024
Not to be combined with any offers or discounts. No institutional pricing. All terms apply.
Bullet Blender® Gold+ Homogenizers
The Bullet Blender® Gold for tougher tissue/cell samples (mouse femur, tumor, and skin) now is dry ice compatible, eliminating sample heating during homogenization. All samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample. There are no probes or blades to cause cross-contamination or sample loss, which also means there are no parts to clean between runs!
- Available with CE certification
- Made in the USA
- Can be used in temperatures ranging from 4°C to 40°C. Altitude: < 2000 m
- Storage Temperature: -40°C to 50°C
Bullet Blender® 50 Gold+ (BB50AUP)
Our largest dry-ice-cooled homogenizer. Can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL HIPPO™ tubes in parallel.
Includes:
- Pack of 20, 50 mL HIPPO™ tubes
- 2 Packs of 4 sleeves (8 sleeves in total)
- Wholly scooper (to scoop dry pellets without the powder)
- 12V DC Wall Plug Power Cord
- Basic Starter Kit:
- Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
- 500 uL microspoon and 1.2 mL spoon
Bullet Blender® E5 Gold+ (BB5EAUP)
Homogenizer for tissue or cell cultures. Can process up to 12 samples in parallel, each sample up to 1 g each in a 5 mL Eppendorf® tube or in * 1.5/2 tubes using the tube adapters (purchased separately).
Includes:
- Pre-filled 5mL Eppendorf® snap-cap tubes with beads, 3 each (Pink, Red, Green, and Navy)
- 25 Pack of 5 mL Eppendorf® snap-cap tubes
- Wholly scooper (to scoop dry pellets without the powder)
- 24 V DC power supply
- Basic Starter Kit:
- Bead Sample Pack: 10 mL samples of 9 different bead types.
Bullet Blender® 24 Gold+ (BB24AUP)
Homogenizer for 24 0.3 g samples in microcentrifuge tubes with a very powerful motor. Used with 1.5 mL GATOR™ snap cap Tubes.
Includes:
- Contact plate for use with GATOR™ Tubes
- 40 Pack of 1.5 mL GATOR™ snap cap Tubes
- Wholly scooper (to scoop dry ice pellets without the powder)
- 24 V DC power supply
- Basic Starter Kit:
- Bead Sample Pack: 5 mL samples of eight different bead types.
- Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
- 50 Pack of 1.5 mL RINO® screw-cap tubes
~80 mL/pound stainless steel beads can be used for the homogenization of tough samples or for special applications such as bacterial isolation.
Bulk stainless steel beads are sold by the pound (0.45 kg).
UFO beads are sold by the 50 mL package.
RNase-free stainless steel beads are sold by the 4 mL package.
Stainless steel beads can be used for homogenization of touch samples or for special applications such as bacterial isolation. Cone beads (UFO beads) have a special shape that is great for cutting through particularly fibrous or resilient material.
Cone beads are available in 3.5 mm and 5.6 mm diameters in either bulk packaging (50 mL tubes) or in an RNase-free option (10 mL pack size). These beads are for use only in 5 mL and 50 mL tubes within appropriate Bullet Blender homogenizer.
Bead Sample Pack - Cell Cultures
Bead sample pack with 5 types of beads for homogenizing Cell Cultures: 0.1 mm glass beads (GB01), 0.5 mm glass beads (GB05), 0.15 mm zirconium oxide beads (ZrOB015), 0.5 mm zirconium oxide beads (ZrOB05), and 0.2 mm stainless beads (SSB02). 10 mL of each
0.15 mm Zirconium Oxide beads (density is 5.5g/cc) in 1 lb (0.45 kg) package. For the homogenization of medium-tough tissue and cells. Autoclavable in dry cycle.
- Ultra Clear
- Versatile and secure storage
- Ideal for long-term storage
- Max RCF 20,000 x g
- Temperature range: -196°C to 121°C
- O-ring molded into cap
- Sterile
- Certified DNase/RNase free