MyTemp™ 65 Heating and Cooling Incubator

The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator for both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built-in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.

With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.
With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).

• Accurate temperature control from 0° to 60°C
• Powerful compressor maintains 0°C
• Stainless-steel internal chamber
• Internal power outlet for shaker, mixers, etc.
• Sized for floor-standing use or on bench-tops less than 32" tall

Specifications
 

Temp. Range:	0°C to 60°C (RT-25°C to 60°C)
Temp. Accuracy:	0.5°C (at 37°C)
Temp. Uniformity:	+/- 1.0°C (at 37°C)
Temp. Increment:	0.1°C
Exterior Dimensions: (WxDxH)	21.25 x 21 x 39.35 in.
Interior Dimensions: (WxDxH)	15.75 x 12.75 x 19.75 in.
Capacity:	65L (2.3 cu. ft.)
Weight:	117 lbs
Refrigerant:	R134A
Electrical:	120, 60HZ or 230V, 50Hz (385W)
Warranty:	2 Years
Operating Temp. Range:	+10 to +30°C

 

SHEL LAB SMI2 Microbiological Incubator

• 7" color display module
• Capacitive touchscreen usable with laboratory gloves
• Real-time clock for logging events
• Door alarm
• On-screen data graphing
• 4-20 mA output for chart recorder or central facility recording
• Interior outlet
• Viewing door
• Stainless steel interior
• 24-month limited warranty

SMI2 SHEL LAB Microbiological Incubator is 2 cubic feet (56.3 L). This benchtop unit is perfect for general cell culture and constant temperature applications.
The SHEL LAB Microbiological Incubator Series has been redesigned for optimum performance. Ranging in size from 2 to 11.7 cubic feet (57 to 331 liters), the SMI Series will fit any workspace.

NEW - Touch Screen

Significantly updating SHEL LAB's General Purpose Incubators, the new 7 inch display provides advanced control functions. With on-screen graphing and real time data, the new SMI controller provides the highest levels of sample security and traceability.
 

Specifications

SHEL LAB Benchtop

The SSI3 has a transparent hood that lifts up via a hydraulic system so it will function in tight places. All of our shaking incubators feature stainless steel interiors which provide excellent durability and an easy-to-clean surface. Each unit has an easy-to-read LED display. The rotation platform is included with each unit and is self-centering for easy installation.

All major functions  temperature, RPM and time  have alarms that alert the user to deviations from set parameters. Overtemperature protection is provided via a safety thermostat. Digital keypad operation offers the ability to calibrate the temperature controller to a reference thermometer.

To better support the load over years of constant use, we utilize four load bearing positions for optimal weight distribution.

Features include:

• Microprocessor Control
• Load Flexibility
• Shaking Platform Included
• Independent Controls for Temperature, Timer, and Shaker
• Full Line of Shaking Access

Shel Lab B.O.D. Thermoelectric 

Benchtop Incubated Shakers

Performance

• Temperature range:
• Ambient +5°C to 80°C for IST-3075 / 4075.
• Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
• Competitive high shaking speed up to 500 rpm.
• Orbital shaking motion in 19mm diameter.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning.
• Wide speed range even with heavy workload.
• Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
• Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
• Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
• Pleasant test environment by the smooth acceleration and deceleration control.
• Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
• High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
• Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

• Intuitive touch screen LCD controller with easy icons and logical menus.
• Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
• Wide sample monitoring and convenient sample loading.
• Convenient sample monitoring without affecting inside environment thanks to the three-side transparent acryl lid with bright LED lamps.
• Gas spring lid supports providing smooth motion, soft opening and closing.
• Repetitive task can be easily performed as the platform stops where it starts.
• Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
• Corrosion resistance stainless steel interior.
• Built-in RS-232 port and USB port for external control and data collection.

Safety

• Automatic run after power interruption.
• Temperature and shaking speed deviation alarm.
• Over-current protection, Stalled platform check.
• Mechanical over-temperature protection device.
• Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
• Audible and visible open-door alarms.



• ITEM NO.	AAH23465U	AAH23565U	AAH23665U	AAH23765U
  MODEL NO.	IST-3075	IST-3075R	IST-4075	IST-4075R
  Temperature Range	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /
  	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176
  Temp. Fluctuation at 37°C in flask	± 0.1°C / 0.18°F
  Temp. Variation at 37°C in flask	± 0.5°C / 0.90°F
  Refrigerator (Hp)	-	1 / 6 HBP	-	1 / 6 HBP
  Motion type	Orbital
  Amplitude size (dia.)	19.1mm / 0.75in
  Speed range (RPM)	20 to 500rpm
  Accuracy	±1% of set speed (>100rpm) / ±1 (100rpm)
  Timer	1 min. to 999 hr 59 min.
  Max. load	10kg / 22lbs at 500 rpm		14kg / 30.9lbs at 500 rpm
  	15kg / 33.1lbs at 400 rpm		21kg / 46.3lbs at 400 rpm
  Volume	53L / 1.9 CuFt		83L / 2.9 CuFt
  Platform (W×D)	350×350mm / 13.8×13.8in		450×450mm / 17.7×17.7in
  Interior (W×D×H)	410×410×320mm / 16.1×16.1×12.6in		510×510×320mm / 20.1×20.1×12.6in
  Exterior (W×D×H)	440x785x510mm / 17.3x30.9x20.1in		540x 890 x510mm / 21.3x35x20.1in
  Net weight	65kg / 143.3lbs	73kg / 160.9lbs	81kg / 178.6lbs	90kg / 198.4lbs
  Electrical requirements (120V)	60Hz, 7.5A	60Hz, 10.1A	60Hz, 7.5A	60Hz, 10.1A