PR1MA™ Digital Refrigerated Incubator

• Digital temperature control
• Personal-sized, 13 x 14.5 inch footprint (20 L)
• Accepts bottles and flasks up to 2 L
• Internal outlet, for installation of shaker, rockers, etc.

With digital temperature control, the PR1MA™ Digital Refrigerated Incubator provides a convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine-tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real-time on the large LED control panel.

Despite a modest footprint of 14.5 x 13″, the incubator features a large internal chamber, capable of storing flasks and bottles up to 2 Liters. In addition, the incubator includes two adjustable shelves and an internal outlet for powering small shakers, rockers, and other instrumentation. A mini nutating rocker (H3D1020) supplied with both flat and dimpled mats is available for the agitation of samples during incubation.

Specifications

Models
 

With its wide temperature range and extensive program functions, a BINDER cooling incubator ensures reproducible conditions in the microbiology laboratory.

Features:

• Temperature range (Model 23): 0°C to 100°C
• Temperature range (Models 53, 115, 240, 400, 720): -5°C to 100°C
• APT.line¢ preheating chamber technology
• Cooling with compressor cooling unit
• Door heating system from 240 liters
• Adjustable fan speed
• Controller with time-segment and real-time programming
• Elapsed time indicator
• Inner door made of tempered safety glass
• 2 stainless steel racks
• Units up to 115 liters are stackable
• Access port with silicone plug from 240 liters
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
• Computer interface: RS 422

Series KB Specifications:

Operating Features

• Temperature control: 0°C to 60°C.
• Microprocessor PID control.
• Simple calibration and auto-tuning functions.
• Digital timer with Delayed ON/OFF function: 1 min to 99 hr 59 min.
• High temperature limit setting and open door alarm.
• Convenient preset function for 3 most commonly used temperature settings.
• Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile.
• Adjustable three-step fan speed with defrosting time and period control.
• Intuitive control panel with bright LED display (0.1°C resolution) and touch-sensitive keypad.
• RS-232 interface.

Constructional Features

• Forced air convection using an optimal cross flow fan for chamber temperature uniformity.
• Large chamber volume: maximum 244L. (8.6 cu ft)
• Built-in electrical outlet with a safety cover inside the chamber.
• Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
• Detachable shelves and round-cornered chamber interior allowing easy cleaning.

FEATURES:

• Eco-friendly with low power consumption & low global warming potential (GWP)
• Easily reverse the door opening
• One degree (± 1°) from ambient temp. (non-refrigerated)
• Secure-Grip Modular Shelving: shelves are adjustable, removable and can easily be swapped between models
• Run-Silent Operation (softer than normal conversation)
• Intelligent temperature control with cross directional airflow for maximum heat distribution (no interior fan)
• Self-Close 90°: Door will automatically close at any angle under 90°
• Two (2) Year Warranty
• FDA registered manufacturer
• External access ports on rear panel for connecting devices such as shakers and rockers

myTemp 65L

The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.

With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).
 

• Accurate temperature control from 0° to 60°C
• Powerful compressor maintains 0°C
• Stainless-steel internal chamber
• Internal power outlet for shaker, mixers, etc.
• Sized for floor standing use or on bench-tops less than 32" tall