View:

TPP Syringe Filters


TPP Syringe Filters, designed by scientists for scientists, improves the ease and rate of filtering small Vols of tissue culture media, aqueous solutions, additives, buffers and water.


Key Features:

  • Designed for high flow rate of media or aqueous solutions
    • 3 to 5 times faster than standard syringe filters
    • Typical starting flow rate at 25°C for water at 2bar (~29psi) is 175mL/min
  • 0.22µm or µm PES membrane
    • Low protein binding
  • Larger filter surface
    • Low dead Vol Additional specifications
  • Higher operating pressure
    • Burst pressure 10bar (~145psi)
    • Bubble point 3.7bar (~53psi)
  • Standard luer-lock connection
  • Housing diameter size 33 mm, Syringe filter rests perfectly on a 50mL centrifuge tube
  • Gamma-sterilized, DNAse/RNAse-Free, and pyrogen-Free
  • Individually wrapped in peel-off plastic wrapper in convenient card box dispenser

Typical applications:


Sterile filtration of protein solutions, tissue culture media, additives, buffers, and water.


Solutions can be filtered fast due to:

  • Large filter surface area, that is increasing the flow rate and throuput
  • High operating pressure: a maximum housing pressure of 10 bar (~145 psi).

Bi-directional
The syringe filter units bi-directional support of the filter membrane enables users to filter aqueous solutions in either direction (only ONE direction per use):

  • Forward (from the syringe into the container)
  • Backward (from the container into the syringe)

The filter unit removes micro organisms, particles, precipitates, and undissolved powders larger than 0.22 micron or 0.45 micron, depending on filter used.
 
Specifications: 
 

Order#DescriptionFilter Area (cm2)Membrane TypeDimensions (mm)MaterialQuantity
TP997220.22 µm Syringe Filters 6PES33 x 27PET/PES40/cs
TP997450.45 µm Syringe Filters 6PES33 x 27PET/PES40/cs
View: