View:

TPP's Packed Cell Vol (PCV) tube enables a quick and reproducible method of cell counting based on cell Vol. A quick centrifuge of the cell suspension pipetted into a PCV tube reveals a packed cell pellet in the PCV capillary, which can be easily read with the aid of an Easy read ruler. This non-subjective method is superior to old-fashioned and labor intensive hemacytometer based counting.

Functional Features:

  • Cell suspension sample can be directly quantitated without dilution
  • Multiple samples can be assayed simultaneously
    • Load and spin as many PCV tubes as your centrifuge rotor holds
  • Quick and reproducible
    • Cells can be spun down in 1 minute at 2500xg

Ergonomic Features:

  • Reproducible measurements
    • Graduated capillary model offers immediate quantitation
    • For finer quantitation: The Easy Read Ruler  is used with non-graduated PCV tubes
  • Eliminates expensive automated counters / fragile slides
    • Avoids subjective microscope counting

Quality Assurance:

  • Gamma-sterilized, DNAse/RNAse-Free, and pyrogen-Free
  • Individually wrapped in peel-off plastic wrapper

Protocol Example:

  • Uniformly mix cell suspension collected from TPP  flask/dish/bioreactor
  • Pipet 1000µL of cell suspension into a PCV tube
  • Spin multiple samples for 1 minute at 2500xg in a standard microcentrifuge
  • Record pellet Vol and compare to pre-generated standard curve of cell numbers to packed cell Vol.
    • Standard curve needs to be set up only once per cell line
    • Pipet pre-determined cell suspension Vols (dilutions) into a hemacytometer
    • Calculate and record the number of live cells for each concentration
    • Pipet the identical Vols into the PCV tube, centrifuge and record the numeric in the capillary that corresponds to pellet Vol
    • Plot the hemacytometer readings vs. the PCV readings for each Vol
    • This Standard Curve doesn't need to be redone for the same cell line and moving forward the cell suspension harvested from TPP flasks/dishes/plates only need to be centrifuged in PCV tubes and assayed for cell pellet measurements

High density of cells

    • With a very high density of the cells, the samples must not be diluted. You might simply reduce the sample Vol. Samples from the same series should be treated accordingly. 
    • For bacteria measurement the parameters have to be adjusted, for example higher g-force, smaller Vol, etc.
    • Micro centrifuges with swing-out rotors are preferable.

     

    Order#

    Description

    Quantity

    TP87005

    PCV Cell Counting Tubes (with capillary graduations only)

    50/pk

    TP87007

    PCV Cell Counting Tubes (no graduations)

    50/pk

    TP87008

    TPP Cap for PCV Tubes

    50/pk

    TP87010

    Easy Read Ruler

    1

    Please call us for sample!

Item#:
ASTPPVCREAD
View: