ACCUCOLD PERFORMANCE PHARMACY-VACCINE REFRIGERATORS

Operating features

• 5°C above room temperature to 150°C.
  
• Microprocessor PID control / Auto-tuning / Calibration.
  
• Digital timer : 1 min to 99 hr 59 min, delayed ON / OFF.
  
• Over-temperature limit and low fluid level protection.
  
• Conveniently preset 3 most commonly used temperature settings, without auto-tuning.
  
• Digital LED display (0.1°C resolution) with splash-proof keypads.
  
• RS-232 interface available.
• 18 months standard; 6 addiitionl months upon receipt of warranty card
  

  Constructional features

• Variable-speed pump for liquid viscosity for accurate, stable, and efficient temperature 
  management. (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)
  
• Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the 
  whole temperature range.
  
• Baffle plate screens circulating pump, heater and sensor to minimize shaking bath fluids and protect sample 
  and operators from direct contact.
  
• Dry-running protection; automated heating element cut-off and audible and visual warning.
  
• Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.
  
• Space saving design uses minimal bench space.

   

  Model   CW-10G CW-20G CW-30G Bath volume (L/cu ft)   10.0 / 0.4 20.0 / 0.7 30.0 / 1.1 Working Temperature Range2)(°C/°F)   Temperature Stability 1)(±°C/°F)   0.05 / 0.09 0.1 / 0.18 0.1 / 0.18 Pump Max. pressure, max. flow rate 5.9 PSI (406.8 millibar), 7.4 gallons/minute (28.0 liters/minute) Max. suction flow rate 2.6 gallons/minute (10.0 liters/minute) Dimensions Bath opening/ depth  (WxL, D) (mm/inch)   211x154, 180 / 8.3x6.1, 7.1 290x214, 200 / 11.4x8.4, 7.9 300x264, 230 / 11.8x10.4, 9.0 Overall  (WxLxH)(mm/inch)   281x450x444 / 11.1x17.7x17.5 360x510x464 / 14.2x20.1x18.3 370x560x494 / 14.6x22.0x19.4 Net weight(kg/lbs)   15.0 / 33.0 17.5 / 38.6 19.5 / 43.0 Electrical Requirements (230V, 60Hz)   50/60Hz, 6.7A 50/60Hz, 8.8A 50/60Hz, 8.8A Cat. No.   AAH52315K AAH52325K AAH52335K Electrical Requirements  (120V, 50Hz)   50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A Cat. No.   AAH52316U AAH52326U AAH52336U

  1) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5°C but in 4 and 
  5 steps, the range will be from Amb. +15°C.
  2) The heat-up time is measured on a 230V electrical condition with 1000W heater power.