Home  >  Equipment  >  Hotplates and Stirrers  >  Hotplate Stirrers  > Benchmark™ Digital Hotplates, Stirrers and Hotplate Stirrers

Benchmark™ Digital Hotplates, Stirrers and Hotplate Stirrers

Item #: ASHOTPLATE100 

2 year warranty

  Hot Plate Magnetic Stirrer Hot Plate Magnetic Stirrer
  H3770-H H3770-S H3770-HS
Temperature Range Amb. +5 to 400°C N/A Amb. +5 to 400°C
Speed Range N/A 150 to 1500 rpm 150 to 1500 rpm
Stir Capacity N/A 5 L 5 L
Platform: 7 x 7 in.| 17.8 x 17.8 cm
Dimensions: (WxDxH) 7.5 x 11.5 x 4 in. | 18 x 27.9 x 10.1 cm
Electrical Data: 115V or 230V, 50-60 Hz, 500 W
       
       
  Hot Plate Magnetic Stirrer Hot Plate Magnetic Stirrer
  H3710-H H3710-S H3710-HS
Temperature Range Amb. +5 to 400°C N/A Amb. +5 to 400°C
Speed Range N/A 150 to 1500 rpm 150 to 1500 rpm
Stir Capacity N/A 15 L 15 L
Platform: 10 x 10 in. | 25.4 x 25.4 cm
Dimensions: (WxDxH) 11.6 x 16.7 x 4.5 in. | 29.5 x 42.4 x 11.4
Electrical Data: 115V or 230V, 50-60 Hz, 750 W

Small on the outside, the Sterilmatic has as much inside capacity as many large, more costly conventional sterilizers and up to five times the capacity of smaller table top units. Two models are available, each with roomy 16 dia. x 26 in. D chamber.

Economical, reliable, and simple to operate, the versatile Sterilmatic provides the highest standards of sterilizing performance in hospitals, clinics, and laboratories around the world.

Large Capacity: The big Sterilmatic chamber holds three trays of 12" x 20" x 2.5" size, or two bedpans. Fits on a 24" counter, or may be ordered with a stand.

Versatile: For all requirements of safe and positive saturated steam sterilization: wrapped and unwrapped dressings, instruments, utensils, glassware, gloves, syringes, bedpans, discharge kits, and liquids. Exhaust speed dial with fast (1 minute for instruments and glassware) and slow (10 minutes for liquids) settings. 0 -to - 60-minute timer. Fixed-temperature model heats to 121 °C (250 °F). Variable-temperature model heats from 110 °C to 121 °C (230 °F to 250 °F).

Safe And Simplified Door Design: Self-sealing and self-aligning one-piece internal door can't be opened until steam pressure is completely exhausted. Cumbersome radial arm construction is eliminated. The door locks itself automatically and positively. All controls are front mounted. Sterilizer features a 0-207kPa (0 - 30psi) pressure gauge, temperature gauge, low water cut-off, safety valve, thermostatic steam trap, and signal light.

Easy To Operate: Fill reservoir with water, load, close door, select exhaust cycle, and set time. Sterilizing cycle begins automatically when unit reaches temperature and pressure. Signal light stays on during sterilizing cycle. Unit shuts off and exhausts steam automatically.

Faster Preheat: Sterilmatic reaches sterilizing temperature in 8-10 minutes from a cold start and in 3-7 minutes when in continued use. Conventional counter autoclaves take three times as long. Sterilmatic provides twice as many sterilizing cycles, increasing daily output substantially.

Optional Accessories

  • Stainless Steel Stand
  • Tray, Perforated Stainless Steel, 30.5W x 50.8L x 6.4D cm(12 x 20 x 2-1/2")
  • Tray, Perforated Stainless Steel, 30.5W x 50.8L x 10.2D cm(12 x 20 x 4")
  • Tray, Perforated Stainless Steel, 30.5W x 50.8L x 15.2D cm(12 x 20 x 6")
  • Basket, Perforated Stainless Steel, 30.5W x 50.8L x 6.4D cm(12 x 20 x 2-1/2")
  • Basket, Perforated Stainless Steel, 30.5W x 50.8L x 15.2D cm(12 x 20 x 6")
  • Recording Thermometer
  • Exhaust Condenser>
  • Recording Chart, 24-hour

Warranty: One Year On Parts, 90 Days On Labor

Overall Dimesnions: 48W x 79D x 74Hcm (18-3/4 x 31 x 29")

Chamber Dimensions: 66L x 41 dia. cm (26 x 16")

Chamber Capacity: 3 cu. ft.

Operating Pressures: 15 psi (1 ATM, 100 kPa)

Net Weight: 63 kg (140 lbs)

Required Connections: Drain, 13mm (1/2") FPT or 16mm (5/8") O.D.; copper steam exhaust connection, 10mm (3/8") IPS. For 208/240V 60Hz, 1 or 3 phase; 30 for 240V, 4-wire; 45 for 208V, single phase; 51 for 240V, 3-wire. Must be hardwired in the location of use. All models available for operation on single or three-phase, three or four wire system.

Meets UL and CSA codes. ASME approved.

PNAUTOCL

Vol
5.7 Liters
 
 
 
SKU Number Plate size Spinning Capacity Speed Temp Range Type Price Quantity Add to Cart
H3710-H 10 x 10 in N/A N/A 35C to 400C Digital Hotplate
567.32
Each
H3710-S 10 x 10 in 15 L 150 to 1500 rpm N/A Magnetic Stirrer
567.32
Each
H3710-HS 10 x 10 in 15 L 150 to 1500 rpm 35C to 400C Digital Hotplate Magnetic Stirrer
789.85
Each
H3770-H 7 x 7 in N/A N/A 35C to 400C Digital Hotplate
326.05
Each
H3770-S 7 x 7 in 5 L 150 to 1500rpm N/A Magnetic Stirrer
326.05
Each
H3770-HS 7 x 7 in 5 L 150 to 1500rpm 35C to 400C Digital Hotplate Magnetic Stirrer
495.43
Each
H3770-TP N/A N/A N/A N/A Optional Temperature Probe
143.54
Each
H3770-ROD N/A N/A N/A N/A Rod
58.02
Each
H3770-CS N/A N/A N/A N/A Clamp/Rod Set
99.53
Each
H3770-CSTF N/A N/A N/A N/A Teflon Clamp/Rod Set
247.56
Each
Magnetic Stirrer
Benchmark™ Digital Hotplates, Stirrers and Hotplate Stirrers
Special Order
Quantity: