Pall® 47 mm, In-line Filter Holders

3540 Bench pH/conductivity Meter (US)

• Simultaneous display of pH and conductivity
  
• 2 independent channels to prevent interference between probes
  
• Additional modes for resistivity, salinity, TDS and mV
  
• Data logger with auto save/print options
  
• Storage of up to 500 readings (250 for each mode)
  
  The 3540 is ideal for use in all laboratories where pH and conductivity analyses are required. The setup menu gives quick and easy access to the whole range of instrument, pH and conductivity measurement options. Calibration of both channels is automatic, with the option to select 1, 2 or 3 calibration points. The pH channel can also display mV values if required.

  The 3540 conductivity pH meter is supplied with a glass combination pH electrode (924 005), glass conductivity probe (K=1 027 013), electrode stand and holder, ATC probe (027 500), BNC shorting plug, pH buffers and US power supply.

  Parameter	3540
  pH range	-2.000 to +20.000
  pH resolution	0.001/0.01/0.1
  pH accuracy	±0.003
  Conductivity range	Auto-selected from 0.01µS to 1.999S
  Conductivity resolution	0.01µS to 1mS
  Conductivity accuarcy	±0.5% ±2 digits
  mV range	±1999.9mV
  mV resolution	0.1mV
  mV accuracy	±0.2mV
  Temperature range	-10 to 105°C
  Temperature resolution	0.1°C
  Temperature accuracy	±°0.5°C
  ATC range	0 to 100°C
  Reference temperature	18,20 or 25°C
  GLP	Calibration reminder interval, Security code protected data
  Outputs	Analogue, RS232and IrDA
  Connector	BNC (pH) and 7-pin DIN (conductivity)
  Power	9V AC ±10% @ 50/60Hz
  Size (l x w x d)	210 x 250 x 55mm
  Weight	850g