Home  >  Liquid Handling  >  Pipet Aids and Serologicals  >  Pipet Aids  >  Drummond  > Drummond Pipet-Aid XP Models

Drummond Pipet-Aid XP Models

Item #: ASDRUM3 

Specifications

 

 

Pipet- Aid® XP

Portable Pipet-Aid®

Pipet-Aid® XP Gravity

Item #

4-098-101

4-000-100

4-000-102

Size

 5.5 in. 10 in. 5.5 in.

Weight

7.5 oz.

8 oz.

7.5 oz.

Capacity

Accepts 1 to 100 mL pipets

Accepts 1 to 100 mL pipets

Accepts 1 to 100 mL pipets

Battery

9 Volt Ni-MH

Ni-MH (3.6V/750 mAh)

9 Volt Ni-MH

Speed

3 Speed Buttons
(S)low, (M)edium and (F)ast

2 Buttons
Upper:Aspiration | Lower: Dispensing

3 Speed Buttons
(S)low, (M)edium, (G)ravity drain*

 

* (G)ravity drain feature allows the user to dispense the liquid by gravity; allowing the liquid to simply fall out of the pipette when the button is pressed… the motor will not run in this mode.

 

 

Electroporation Cuvette


Electroporation Cuvette

 

These cuvettes are compatible with most electroporation systems. The cap has been designed to improve aseptic handling techniques, while the lip and positive seal reduce potential aerosol and contamination issues. Available in 1 mm, 2 mm, and 4 mm gap sizes with individual color caps. Every cuvette is guaranteed sterile, packed using gamma irradiation, and has a simple tear wrapper for easy access when you need it. All 1 mm and 2 mm cuvettes have a tapered V bottom so that reduced sample volumes can be used while aiding sample pick up and minimizing dead volumes.

 

The Cell Projects range of HiMaX Electroporation cuvettes is designed to maximize molecular electroporation and electrofusion efficiencies for Bacteria, Yeast, Insects, Plants, and mammals. Each batch of cuvettes must undergo rigorous testing at several stages during the manufacturing process for engineering tolerances, biocompatibility, and sterility before being Quality tested for optimal and reproducible impedance measurements.

 

All batches are checked to optimize bio- and Transfection compatibility. Stringent use of high-quality polycarbonate and chemicals ensures consistent, uniform pulse generation and improved gene transfer.

 

The molding process ensures extremely high tolerances so that the electrodes have a consistent gap and parallel configuration. The electrodes are also cleaned chemically and physically to fully optimize the cuvette for high transformation efficiencies.
 
S4100 Family
Item#:
ASMTCDISPOCUV
 
Cuvette, Vis,
Item#:
ASBASELCT2
 
SKU Number Type Color Qty Price Quantity Add to Cart
4-098-101 Pipet-Aid XP, 110V White, Yellow 1/ea
385.00
Each
4-000-100 Pipet-Aid Portable, 110V White, Black 1/ea
440.00
Each
4-000-102 Pipet-Aid XP Gravity, 110V White, Burgundy 1/ea
495.00
Each
4-000-079 EZ Grip TC Nosepiece Black 1/pk
25.00
Each
4-000-079-B EZ Grip TC Nosepiece Blue 2/pk
40.00
Each
4-000-079-G EZ Grip TC Nosepiece Green 2/pk
40.00
Each
4-000-079-O EZ Grip TC Nosepiece Orange 2/pk
40.00
Each
4-000-079-R EZ Grip TC Nosepiece Red 2/pk
40.00
Each
4-000-079-V EZ Grip TC Nosepiece Violet 2/pk
40.00
Each
4-000-079-W EZ Grip TC Nosepiece White 1/pk
25.00
Each
4-000-051 TC Replacement Filters (8 um), Non-Sterile White 5/pk
37.00
Each
4-000-052 TC Replacement Filters (8 um), Non-Sterile White 50/pk
300.00
Each
4-000-050 Portable Nosepiece Kit w/ 4 Filters (8um) Black 1/ea
105.00
Each
4-000-087 XP/Hoodmate Nosepiece Kit w/ 4 Filters (8um) Black 1/ea
95.00
Each
4-000-089 Holster and Wall Bracket Black 1/ea
25.00
Each
4-000-030 Pipet-Aid Charger, 110V N/A 1/ea
34.00
Each
4-000-035 Pipet-Aid Replacement Battery N/A 1/ea
31.00
Each
4-000-002 Pipet-Aid Rubber Inserts N/A 2/pk
15.00
Each
4-000-057 TC Rubber Gaskets Black 1/ea
15.00
Each
Pipet-Aid Rubber Insert
Drummond Pipet-Aid XP Models
Special Order
Quantity: