S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Lab Equipment
Shopping for scientific equipment has never been as easy as browsing through our catalog; rich in premium, ergonomic, durable, and affordable lab equipment of all sorts.
Our stock of lab equipment is so vast that we can only offer a small preview here but, rest-assured, we firmly believe that any lab equipment you buy from MIDSCI™ is going to satisfy your needs.
MIDSCI™ offers accurate balances, quiet centrifuges, ergonomic chairs, powerful homogenizers, and durable hotplates.
We also carry incubators known for temperature uniformity, microplate readers with artificial intelligence onboard, microscopes with infinity-corrected optics, and water purification systems that can save you money.
Many of our items come with amazing warranties and some carry additional discounts.
Z207-M Microcentrifuge
- Unique EZ-Scroll™ touchpad
- High speed, up to 17,317 x g
- Compact, 11 in. wide
- Multiple rotor options for 1.5/2.0ml tubes
- 5 Year Warranty
The Z207-M is the perfect microcentrifuge for laboratories with valuable limited space that requires quiet, and powerful centrifugation.
The Z207-M's compact design houses a powerful, maintenance-free, induction motor that can reach up to 17,317 x g. Accompanied by Hermle's easy-to-use control panel, the unique EZ-Scroll™ touchpad gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy-to-use front panel can be used to adjust accel/decel rates, run time, and change the end-of-run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally, the Z207-M features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.
All common microtubes 0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL can be utilized in the standard 24-place rotor, as well as in a hermetically sealed, 24-place rotor for labs requiring an aerosol-tight enclosure when working with hazardous chemical, or biological, samples. An optional 18-place spin column rotor is also available.
With our Z207-M microcentrifuge, even the smallest laboratories can have high output with a small footprint.
Specifications
Speed Range | 200 to 13,500 rpm |
Max. RCF | 17,371 x g |
Max. Capacity | 24 x 1.5/2.0 mL |
18 x 2.0 mL spin column | |
Dimensions | 11 x 13.8 x 9.5 in. |
(W x D x H) | 28 x 35 x 24 cm |
Weight | 27.6 lbs (12.5 kg) |
Electrical | 120 V or 230 V, 50/60 Hz 170 W |
Z207-M | Z207M microcentrifuge, 115 V |
Z207-2420 | 24 x 1.5/20 mL rotor (for Z207-M only) |
Z207-2420H | 24 x 1.5/2.0 mL rotor, hermetically sealed (for Z207-M only) |
Z207-1820SP | 18 x 1.5/2.0 mL Spin column rotor (for Z207-M only) |
Environmentally Friendly Weigh Boats
NO STATIC BUILD-UP - Glassine paper is free of static electricity that plagues disposable plastic weighing dishes (polystyrene and polyethylene).
CONTAMINANT FREE - Pure glassine is an ultra-clean paper product.
EASY TO USE - Robust and durable yet easy to fold for pouring.
IDEALLY SIZED - Measures 3.5" diameter for standard weighing balances.
COLOR CONTRAST - Chocolate-colored glassine reveals every particle of material.
Hermle Z206-A Bundle with 6 x 50ml rotor (Z206-BND)
Bundle Includes: one Z206-A Centrifuge, 115V and one 6 x 50mL rotor
Promo valid 07/01/24 - 12/31/24
This promo cannot be combined with other promotions or discounts. Institutional pricing not valid. All terms apply.
Z206-A Compact Centrifuge
- Accepts tubes up to 50 mL
- Compact, 11 x 14.5 inch footprint
- Suitable for urine and blood separations (including Platelet Poor Plasma)
- Optional adapters for all common blood collection tubes
The Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2 mL to 50 mL. A unique 6 x 5 mL swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced microprocessor controls feature an ergonomic turn knob that controls all settings (time, speed, accel/decel levels, etc.). The speed can be adjusted from 200 rpm up to a maximum speed of 6,000 rpm (corresponding to 4,427 x g) in the popular 50 mL and 15 mL rotors.
The centrifuge lid features and automatic lid-lock that prevents it from being opened while the rotor is still in motion. In addition, a unique imbalance detection system is designed to automatically power down the motor in the event of improper loading of the rotor or any tube breakage.
Compact, quiet, and versatile are just a few of the features found in the Z206-A centrifuge. Add to this, the proven safety features, and the result is the ideal centrifuge for a variety of clinical and molecular biology applications.
Specifications
Speed Range | 200 to 6000 rpm |
Max. RCF | 4427 xg |
Max. Capacity | 6 x 50 mL |
Dimensions | 11 x 14.5 x 10.2 in. 27.9 x 36.8 x 25.9 cm. |
Timer | up to 99 hr, 59min and continuous |
Weight | 29 lbs (15 kg) |
Electrical | 120 V, 60 Hz, 100 W |
MIDSCI has the weigh boats and weigh paper for your needs. With varying sizes, colors, and shapes, we ensure we have the weigh boat or paper for you. Order today!
Bullet Blender® 5 Storm
The Bullet Blender Blue 5 was designed to process medium sized samples up to 1 g in mass. This instrument can also handle samples as small as 100 mg. Process up to 12 samples at a time in 5ml screw-cap tubes. With Air Cooling™ technology to minimize heat build up. Available with CE certification.
Includes:
- Bullet Blender 5 Storm
- Operator’s Manual
- 24V DC Wall plug power supply (UL/CE)
- Basic starter kit which includes:
- Bead Sample Pack contains seven different bead types
- Spoon for dispensing beads
- Sample pack of 5 mL Axygen screw-cap tubes
Features:
- Air Cooling™ prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
- Compact
- The footprint is only 9 in. (22 cm) wide by 11 in. (28 cm) deep.
- High Throughput
- Homogenize 12 samples at one time.
- User friendly
- Only 2 settings to select: time and speed (intensity).
- The time of the run may be adjusted from 1-5 minutes
- Automatic stop after time is up.
- 10 speeds
- Permits gentle vortexing to vigorous homogenization.
- User friendly interface.
- Versatile
- Compatible in temperatures ranging from 4-60°C (avoid condensation, which may damage electronics and void the warranty).
- Requires only an electrical outlet for operation.
- CE certified 24V power supply, shipped with the proper plug configuration for domestic or international outlets.
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
- Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
- Humidity levels, maintained through evaporation, of up to 95%
- Data logging capabilities
- Designed to minimize contamination; includes:
- Patented copper-caged HEPA filter
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty 5 years parts and labor in the USA, 7 years on the IR sensor
MODEL
SCO5W
PART ID
SCO5W
EXTERIOR DIMENSIONS (W × D × H)
26 × 25.5 × 40.3
(661 mm × 648 mm × 1024 mm)
INTERIOR DIMENSIONS (W × D × H)
19.3 × 19.8 × 23
(490 mm × 503 mm × 584 mm)
VOLUME
5.1 cu.ft. (144 L)
SHELF DIMENSIONS (W × D)
19.1 × 19.1 (485 mm × 485 mm)
UNIT WEIGHT
254 lbs (115.2 kg)
INTERIOR METAL
300 SST
EXTERIOR METAL
Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE
Amb +5C - 60C
TEMPERATURE UNIFORMITY - MIDRANGE
0.2 °C
TEMPERATURE STABILITY - MIDRANGE
0.1 °C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT
110-120 VAC, 50/60 Hz, 5.0 Amps
MAX HVAC LOAD
2137 BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE
Bullet Blender® 5 Gold
- Homogenization of up to 12 samples from 100 mg - 1 g (100 µl - 1 mL for plant tissue, insects and cell culture) in 5 mL centrifuge tubes
- Range of speeds allows for gentle vortexing, vigorous homogenization, or anything in between
- Can be used in temperatures ranging from 4°C to 40°C*
- With 4°C Cooling™
- Made in the USA
*avoid condensation, which will damage electronics and void the warranty
The BULLET BLENDER® enables you to homogenize, disrupt, or lyse up to 24 tissue or cell culture samples at a time. Load the samples into standard polypropylene tubes, then place them in the BULLET BLENDER. The "bullets" in the instrument vigorously strike all of the tubes and homogenize your sample in minutes.
Includes:
- Bullet Blender 5 Gold
- Operator’s Manual
- Power supply
- Basic starter kit which includes:
- Bead Sample Pack contains centrifuge tubes of several different types of beads
- Spoon for dispensing beads
- Sample pack of 5 mL Eppendorf tubes
Consistent and High Yield Results
The BULLET BLENDER homogenizer prepares up to 24 samples in just minutes. All of the samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample.
No Cross-Contamination or Sample Loss
There are no probes or blades to cause cross contamination or sample loss, which also means there are no parts to clean between runs. The sample tubes are kept closed and self-contained during homogenization.
Samples Stay COOL
No cool down required. The Bullet Blender homogenizers use very little power due to the unique, patented design. There is very little heating of the samples because the sample tubes vibrate vigorously in air, keeping them cool, rather than being subjected to frictional heating as the tubes rub against the walls of a holder. Also, because the motor does not need to agitate any heavy platforms or plates, it is small and will last for many years.
So Easy To Use
Simply place your sample, beads and buffer in standard tubes, and load the tubes into the BULLET BLENDER homogenizer. Tune the extent of disruption by adjusting the run time and speed. Afterwards, place the sample tubes in a centrifuge to separate the lysate. No special holders are needed. There are no clamp plates or locking rings to fiddle with.
Risk Free Purchase
BULLET BLENDER homogenizers come with a 30 day money back guarantee and a 2 year warranty. The simple, reliable design enables the BULLET BLENDER to sell for one half the price of other agitation based instruments, yet provides an easier, quicker, cooler technique.
Although they do not have a humidity display, the extremely stable temperature environment maintains constant humidity through evaporation at 95%. Double wall construction reduces this unit's footprint, so they fit in tight spaces as well as tight budgets.
The audible/visual alarms for temperature and CO2 respond to out-of-tolerance conditions. They offer an independent overtemperature safety control to protect samples from overheating, and an optional CO2 tank switch/alarm to prevent prematurely exhausting the gas supply. Features include:
- Infrared CO2 Sensor
- Heated Outer Door
- Independent Overtemperature Protection
- Quick Clean Shelf System
Specifications: |
SCO6WE |
Chamber Capacity: |
6.0 cu.ft |
Temp Range: |
Ambient + 8°C to 60°C |
Temp Uniformity: |
+/- 0.2°C at 37°C. |
CO2 Sensor |
Infrared (IR) |
CO2 Range: |
0-20% |
CO2 Recovery Rate: |
< 5 minutes |
Interior Dimensions |
20.2 x 19.7 x 25.2 (51.4 x 50.1 x 64.1 cm) |
Exterior Dimensions |
26.0 x 26.3 x 40.3 (66.0 x 66.7 x 102.2 cm) |
Shelves: |
3 supplied (16 max) |
Net weight/Shipping Weight: |
245/310 lbs. |
Color-coded for easy identification
Each box is secured with a rust-resistant nickel-plated clasp and hinge pin. Available with either cork or foam lining. Each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Boxes stack securely on top of each other, and are available in blue, green, red, yellow, white, gray, or black. Measures 8.75 x 6.75 x 1.3".
Benchmark™ Mini Nutating Rocker
- Includes dimpled mat; ideal for mixing in blood & centrifuge tubes
- Tri-directional motion for thorough, uniform mixing
- Cold room and incubator safe
The Mini Rocker is a multi-functional shaker that provides a three-dimensional nutating motion for thorough foam-free mixing in tubes as well as a variety of flat vessels. The model comes standard with an autoclavable dimpled mat and optional flat mats are available for mixing with other vessel types. This mixer features maintenance-free, brushless motors and is capable of loads up to 2 kg, and is safe for use in cold rooms or incubators.
The Benchmark™ Mini Nutating Rocker comes with a flat cord and an 8 x 6-inch platform with dimpled and flat mats. The rocker is designed to fit inside Digital Mini Incubators (H2200-H/H220-HC)
Specifications
Speed | Fixed 24 rpm (20 rpm for 230v) |
Tilt Angle | Fixed; +/- 20° |
Platform Size | 8 x 6 in. |
Load Capacity | 4 lbs./ 2 kg |
Operating Temp Range | +4 to +65° C |
Electrical | 115V or 230V, 50-60 Hz, 50W |
Warranty | 1 year |
Bullet Blender® 50 Gold
Our largest dry-ice cooled homogenizer can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL tubes in parallel. Available with CE certification.
Includes:
- Bullet Blender 50 Gold
- Operator’s Manual
- Power supply
- Basic starter kit which includes:
- Bead Sample Pack contains centrifuge tubes of several different types of beads
- Spoon for dispensing beads
- Sample pack of 50 mL TPP brand tubes
Specifications:
- Capacity: Up to 8 x 50 mL screw-cap Axygen® or Corning® brand self-standing plug-seal cap tubes.
- Maximum recommended sample size: 3.5 mg.
- Maximum fill volume (including beads and buffer): 20 mL.
- Dry ice cooling system: Fill compartment on the side of the instrument with dry ice to keep the inside of the instrument at 4°C. A light will come on to notify the user when the inside of the instrument reaches 4°C.
- Sound insulation allows for quiet homogenization.
Features:
- Dry Ice compartment
- Prevents samples from heating up when processing multiple rounds. The COOLEST homogenizer available!
- Compact
- The footprint is only 22 in. (56 cm) wide x 15 in. (38 cm) deep x 15 in. (28 cm) high
- High Throughput
- Homogenize 8 samples at one time.
- User friendly
- 8 speed settings easily selectable from a front-panel control. The wide array of speeds allows the Bullet Blender to be used for gentle vortexing, vigorous homogenization, or anything in between.
- 7 time settings- 1 minutes, 2 minutes, 3 minutes, 6 minutes, 9 minutes, 12 minutes and 15 minutes.
- The Bullet Blender will automatically stop after the selected time is up.
- Versatile
- Relative Humidity: 5- 90% non-condensing.
- Power Requirement: 100-240V~ 4.5-2.5A, 50/60Hz.
- Can be used in temperatures ranging from 4°C to 40°C. Altitude: <2000m.
- Storage Temperature: -40°C to 50°C.
- Requires only an electrical outlet for operation.
- CE certified 12V power supply, shipped with the proper plug configuration for domestic or international outlets.
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability.
- Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C.
- Humidity levels maintained through evaporation of up to 95%
- Data logging capabilities
- Designed to minimize contamination; incudes:
- The fastest high heat decontamination cycle on the market without having to remove critical components
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor
EXTERIOR DIMENSIONS (W × D × H)
28.5 × 30.8 × 39.5
(724 mm × 783 mm × 1004 mm)
INTERIOR DIMENSIONS (W × D × H)
20.2 × 20 × 25.5
(513 mm × 508 mm × 648 mm)
VOLUME
5.9 cu.ft. (167 L)
SHELF DIMENSIONS (W × D)
19.1 × 19.1 (485 mm × 485 mm)
UNIT WEIGHT
238 lbs (108 kg)
INTERIOR METAL
300 SST
EXTERIOR METAL
Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE
Amb +5C - 50C
TEMPERATURE UNIFORMITY - MIDRANGE
0.25 °C
TEMPERATURE STABILITY - MIDRANGE
0.1 °C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT
110-120 VAC, 50/60 Hz, 12.0 Amps
MAX HVAC LOAD
2354 BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE