Benchmark™ Incu-Shaker™ CO₂ Mini

• Six-side direct heating for excellent uniformity and recovery
• Integral, MAGic Clamp™ orbital shaker, ideal for suspension cell culture
• Dual Beam IR sensor, for precise CO₂ control
• Stackable design with a belt-less motor that limits vibration and provides a smooth, consistent shaking motion
• Stainless steel chamber with rounded corners for easy cleaning

Ideal for the culturing of non-adherent cells, the Incu-Shaker™ CO₂ Mini combines a precision CO₂ incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture.

With our unique and proprietary heat distribution technology, the incubator provides the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low-speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample-to-sample contamination.

Specifications
 

Temperature Range:	Ambient +5 to 60°C
Temperature Accuracy:	±0.5°C*
Temperature Uniformity:	±0.5°C*
Temperature Increment:	0.1°C
Temperature Stability:	0.1°C*
Speed Range:	30 to 300 rpm
Speed Increment:	1 rpm
Mixing Orbit:	19 mm (3/4 in)
CO2 Range:	0 to 20%
CO2 Increment:	0.10%
CO2 Accuracy:	±0.1%
CO2 Sensor:	Dual Beam IR
Time Range:	1 min. to 48 hours (or continuous)
Platform Dimensions:	9.5 x 11.5 in. (23.5 x 29 cm)
Chamber Dimensions:	13.2 x 10.25 x 15.4 in. (33.5 x 26 x 39.2 cm)
Chamber Volume:	46 L
Chamber Material:	Stainless Steel
Exterior Dimensions:	16.5 x 18.3 x 21.8 in. (42 x 46.5 x 55.3 cm)
Weight:	90 lbs / 40.1 kg
Electrical:	120V or 230V, 50-60Hz (350W)

 

* At a set temperature of 37°C

 
 

MAXIMUM CAPACITY CHART:
50 mL	125 mL	250 mL	500 mL	1000 mL	Micro	15 mL	50 mL
Flasks	Flasks	Flasks	Flasks	Flasks	Plates	Tubes	Tubes
20	12	8	5	4	4	64	30

 

The Belly Bath, also with the Belly Dancer undulating motion, uniquely provides you 3-in-1 capabilities for shaking water bath, stationary water bath or shaking only applications. Here are some of the key features:

Customizable -- You choose to shake, heat or both

• 0-100 rpm speed range
• 30-75°C temperature range at 30°C/min ramp rate
• Light weight and Portable
• Use it as a combo or use the shaker and bath separately

Applications Galore

• Shake + Heat: hybridizations, in-situ washes, blot stripping
• Heat Only: Serum thawing, restriction digests, protein colometric assays
• Shake Only: Gel and blot staining, washing and probing

Durable

• Chemically resistant and stainless steel parts
• Up to 5 lbs. of load
• Whisper quiet operation

Dimensions

• 10.38 x 10.38 x 3.25 in. Water Bath
• 7 x 7 in. Platform
• 1-yr warranty

Haier CO2 Incubator

• 115V / 60Hz Sterilization
• Uniform and Stable Temperature
• Precise CO2 Concentration
• 180ºC Dry-heat Serialization
• Fast Environment Recovery      

Haier Biomedical IoT enabled CO2 incubator with 180°C dry heat sterilization provides a safe and secure reproducible growth environment for cell cultures.

Product Features

Precise CO2 Concentration Using New IR Sensor Control Technology

Haier Biomedical's new IR Sensor technology uses DIR measurement principles and withstands high temperatures of 190ºC. The silicon MEMS transmitter can carry out more than 300 dry heat sterilization cycles to extend the service life to 15 years. Built-in temperature and humidity compensation technology reduces the impact of changes of humidity and temperature without the need for calibration after the high-temperature sterilization. The five-point calibration yields a higher measuring accuracy and sensitivity with less drift.

Fast Environment Recovery for Optimal Cell Growth

Adopting active airflow control technology, and based on the fuzzy PID control principle, the parameters can be restored without overshoot. After opening the door for 30 seconds, the temperature and CO2 concentration can be quickly restored within 4 minutes. Even if multiple users share a CO2 incubator and frequently open and close the door, the stability and uniformity of the incubator can be ensured.

180ºC Dry-Heat Sterilization Technology Minimizes Contamination

Easy and effective sterilization of microorganisms including bacteria, fungi, and micro plasma with strong resistance, at 180°C high temperatures without the need for consumables. Simply press the “sterilization key” to activate and complete the sterilization process automatically in just 12 hours. Delivers sterility level within the chamber of all surfaces to meet WS/T367-2012 standards. All components are sterilized during the process, there is no need to dissemble internal components (including CO2 sensors) and decontaminate separately, thus avoiding secondary pollution.

Anti-Condensation Heating System to Reduce Pollution Risk

The door on the CO2 incubator radiates heat to the inner glass door, effectively preventing the glass door from forming condensation. The possibility of microbial contamination caused by the condensate water is eliminated.

Intelligent Control of Circulating Air Maintains Uniformity

Automatically adjusts the circulation of the airflow, optimizing the airflow to avoid air volatilization of samples and ensuring proper uniformity throughout the chamber.

Comprehensive Safety Alarm System

The system ensures the safety of experiments and processes by utilizing an independent temperature alarm system, including a sound light and remote reminder. Other alarms include CO2 concentration, door ajar, and water shortage.

LC-8 Compact Centrifuge

LC-8 series of laboratory centrifuges is uniquely designed to meet a wide range of applications in both the clinical and research laboratory. An eight-position rotor is included and designed to directly accept 10 mL and 15 mL test tubes (conical or round bottom). At the same time, optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning.

The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.

To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged before starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. 

Specifications

LC-8 Plus Compact Centrifuge

LC-8 series of laboratory centrifuges is uniquely designed to meet a wide range of applications in both the clinical and research laboratory. An eight-position rotor is included and designed to directly accept 10 mL and 15 mL test tubes (conical or round bottom). At the same time, optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning.

The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.

To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged before starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. 

Specifications

SHEL LAB Drosophila Incubator

SHEL LAB Drosophila units utilize day/night controls along with LED lighting to provide an excellent environment for drosophila culture.

The cabinets are designed with a mechanical convection system to ensure a gentle and even air distribution. A programmable day/night temperature limit control ensures a proper and safe environment.

The energy-saving thermoelectric cooling system provides improved temperature uniformity and up to 78% less power than traditional compressor-based models.

These units are covered under a two-year warranty and are certified to current global safety standards.

• Precise Temperature Control - Superior Uniformity
• Independent Over Temperature Thermostat
• Door Ajar Alarm
• Temperature Range 15°C to 40°C

Benchmark™ MiniMag™ Magnetic Stirrer

• “Mini” sized, less than 3.5″ wide
• Adjustable speed control, 100 to 1500rpm
• Effectively mixes volumes up to 1.5L

With a square footprint of under 5 inches, the MiniMag™ is the most compact stirrer in the Benchmark line. Despite its modest dimensions, the 3.4-inch square work surface accepts a wide variety of beakers, flasks, bottles, and other laboratory vessels for stirring volumes as large as 1.5 liters.

The stirring speed is continuously adjustable from 100 to 1500rpm. For temperature sensitive samples, the MiniMag is incubator and cold-room safe for use from +4°C to +45°C.

Specifications 

Benchmark™ Multi-Position Hotplate Stirrers

The Benchmark Multi-Position Stirring Hotplates provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch.

Three models are available, offering 3, 5 or 10 position capacity. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100 mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles.

• Simultaneous heating and stirring
• White ceramic top surface
• Effective stirring in bottles up to 1 liter
• Digital control of both speed and temperature

Specifications 

OHAUS AquaSearcher™ pH Meter
 

The OHAUS pH Meter is an easy-to-use Benchtop Meter for measuring pH and ORP. AB23PH Bench Meters are simple to use with basic instructions, operational buttons, and LCD display for accurate readings. A stand-alone electrode holder with a small base gives the user greater flexibility when running experiments and makes the AB23 benchtop meter a perfect space-saving meter for your lab.

Unique Features

• 6 instructional menu buttons
• 5 in. bright LCD display with complete measurement information allows you to monitor the results from a distance
• 99-item memory for measurements ensures efficient data collection
• Auto buffer recognition
• three-point calibration
• electrode condition icon

Includes

• Power Cord
• AB23PH Benchtop Meter
• ST322 pH Electrode
• Stand-Alone Electrode Holder
• pH Mini Buffer Kit (4 x 50 mL)

Don’t forget to check out our PR1MA Buffers!

Specifications

The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination.

Key Features:

• Six side direct heating for excellent uniformity and recovery
• Integral, MAGic clamp orbital shaker, idea for suspension cell culture
• Dual Beam IR sensor, for precise CO2 control.
• Stackable design with beltless motor which limit vibration and provide a smooth, consistent shaking motion.
• Stainless steel chamber with rounded corners for easy cleaning.

* At a set temperature of 37.0°C

*230V option is also available.

 
Benchmark™ Overhead Stirrers

• LCD control panel
• Includes complete stand assembly
• Compact and quiet
• Digital accuracy and convenience

Benchmark’s Overhead Stirrers feature high torque and advanced digital microprocessor control for smooth mixing of low and medium-viscosity samples. Speed and run-time are accurately set and monitored on the LCD screen. Both the 20 L and 40 L capacity models are supplied with a 4-arm stainless steel propeller, additional steel and Teflon accessories are available. 

A feed-through chuck holds accessory shafts firmly in place and is easily tightened and loosened without tools. The overhead stirrers are protected from damage by sensors that shut down operation in the case of high viscosity or obstruction, while a splash cover protects the connection mechanism from potential corrosion. Unlike most mixers, the Benchmark series is also supplied with a support stand and mounting hardware. The stirrer easily and securely attaches to the stand for compatibility with a variety of vessels, up to 24 inches high.

Specifications
 

Benchmark™ Industrial High-Capacity Stirrers

• Stir up to 150-liter volumes
• Chemically resistant white ceramic top surface
• Powerful motor ideal for large vessel applications
• Digital control of both stirring speed and timer

Benchmark Industrial HCS Series of high-capacity stirrers provide reliable performance and safe operation for high throughput lab use. These stirrers feature a durable, chemically resistant white ceramic top plate, which protects the internals of the stirrer from leaks and spills. The powerful motor drive system ensures efficient and thorough mixing in large vessels and viscous samples.

Ideal for large-scale stirring applications, the HCS Series offers 50-liter and 150-liter maximum capacity models, as HCS-50L and HCS-150L respectively. Mixing speed can be viewed on the large digital display, and speed is adjustable from 50 rpm to 1500 rpm (IPS7101-50) or 1200 rpm (IPS7101-150). The built-in timer settings range from 1 second to 9 hours and include a continuous operation setting.

Specifications