Home  >  Tissue/Cell Culture  >  Tissue/Cell Culture Equipment  >  Tissue Culture Large Equipment
|◀ ◀ 1 - 5 of 5 ▶ ▶|
View:

Please email tech@midsci.com or call 800-227-9997 to request a quote.


Airstream® NS G4 Class II Type A2 Biological Safety Cabinet


Introducing Airstream® NS G4 Class II Type A2 Biosafety Cabinet.

 

The new BSC with Centurion Touchscreen controller is NSF-certified with standby height that easily activates standby mode, an ergonomic work zone that is comprised of bright illumination using industry-leading dimmable LED combined with a raised, durable, stainless-steel armrest. It also comes with wider model options offering stainless steel (S-series) and glass (E-series) side wall variants.

 

The Airstream® NS G4 incorporates greener features, ensuring a more sustainable and environmentally friendly operation. With its compact size and advanced features, this biosafety cabinet offers an unparalleled level of convenience and safety, making it the ideal choice for laboratories and research facilities.

 

 

Centurion Touchscreen Controller

Intuitive, comprehensive, and easy-to-understand

Virtually comprehensible safety information and cabinet alarms via 3D BSC diagram

Defined details of alarm types with clear instructions for proper intervention

Centered and angled down for easy reach & viewing

Selectable Quickstart mode for fast operation

 

Dimmable LED

Adjustable work zone brightness

Ideal light intensity of 1200 lux

Saves energy and optimizes work comfort

 

Ergonomic Features

8” sash opening

Frameless, shatterproof, and UV-absorbing tempered glass

 

Tray support beams and holder

Support beams for less vibration and holder for easy drain pan cleaning

 

Green Product

Equipped with energy-efficient DC ECM that allows up to 70% energy savings vs AC motor

Extremely low energy consumption with 184 watts (4 ft unit)

Standby mode allows reduced power consumption

 

ULPA Filter

10x filtration efficiency compared to the HEPA filter

Creates ISO Class 3 work zone instead of industry-standard, ISO Class 5

Same 10 years filter life and replacement cost as HEPA filters

*99.999% at 0.1 to 0.3 micron, ULPA as per IEST-RP-CC001.3 USA
*99.999% at MPPS, H14 as per EN 1822 EU

 

Isocide™ Antimicrobial Powder Coating

Eliminates 99.9% of surface bacteria within 24 hours of exposure
Item#:
ASAIRSTNSG4CIITA2

Inverted Microscopes

 

Tissue Culture Microscopes are a staple for most laboratories and MIDSCI™ has a wide variety of scopes to offer at prices you can afford.

 

From our i410 microscope which offers research-grade optics and features at a laboratory-grade price to our i300 scope which offers a compact size at an unmatched price point, we have a tissue culture scope to meet every application and budget.

 

Each microscope is built on the most advanced optical technology and without compromise. Universal optics that work in all media types and function in all illumination techniques make these scopes a powerful laboratory tool. Ergonomic features and design provide a fatigue-free imaging experience.

In addition, we have many models that are modular in design so you can be comfortable in knowing your purchase today can be upgraded to enhance your labs growing needs.

 

Specifications  
Itemi410i410FL
Optical SystemNIS60 INFINITYNIS60 INFINITY
Observation MethodsBrightfield, Apodized Phase, Phase, Emboss Conrast, Hoffman ModulationBrightfield, Apodized Phase, Emboss Conrast, Hoffman Modulation, Epi-fluorescence
Optical LensesUniversal Long Working Distance
S-Plan Apo, Plan Fluor, Plan Achromat
IlluminationHigh Luminescent White Light LED
Eco TechnologyIntegrated--Auto Off
EyetubeErgonomic 45 Degree: Binocular
Photo PortIncluded\Integrated
Eyepieces  (F.O.V) 10x (22), 15x (16), 20X (12.5)
FocusingCoare 2um\Fine 1um Resolution
Coarse Focus Tension Adjustment
Nosepiece5 Position-Side Accessable
CondenserELWD | 0.30NA | 75 mmWD
Contrast SliderPre-Centered Phase Slider
Emboss Conrast Slider
StagePlatform 170 mm x 250 mm
(Mechanical Stage Optional)
Epi-FluorescenceN\AOptical Module Integrated
Epi Fluor FiltersN\ASelectable
Epi-Fluor LEDsN\ASelectable up to 4 LEDs
Dimensions (DxWxH)543 x 243 x 470 mm

All configurations Include:

  • Microscope stand w/ Coarse and Fine Focus
  • White Light LED with Variable Intensity
  • Eye tube and 2/ea Eyepieces
  • Photo Port
  • Platform Stage
  • 5-Position Nosepiece
  • Universal Condenser
  • Phase Slider

 

Please call for a quote for Configurations with Epi-Fluorescence or Emboss/Hoffman Modulation Contrast Options
or if you are looking for an item that has been discontinued. Thanks!
 

 
 

Item#:
ASSCOPEINV

CelCulture® CO2 Incubators

  • Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
  • Direct heat & air jacket design with gentle yet effective forced convection.
  • Intuitive interfaces and intelligent data and event logger.
  • Preventative maintenance kit includes filter and inline filter for direct mounting type.

The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.


Key Benefits

  • CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
  • SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
  • All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
  • The incubator's main body is made from electro-galvanized steel with Esco's unique ISOCIDE™ antimicrobial coating.
  • SwiftCon™ moist heat 90°C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
  • CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
  • CO2 tank depletion reminder in addition to CO2 tank-low alarm.
  • ULPA-reminder will alert user to replace ULPA filter


VivoCell™ Precise Temperature, CO2 Control and High Humidity

  • Best uniformity and control among available CO2 Incubators
  • Fast CO2, temperature, and humidity recovery without overshoot.
  • Direct heat design for rapid recovery, with 8 heaters grouped into 3 zones.
  • Air jacket provides isolation against ambient temperature fluctuations.
  • Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
  • Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.


Easy-to-Clean

  • Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
  • Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
  • Glass door and inner gasket are removable without tools
Item#:
ASCELCULTURECO2

AEOLUS™ CO2/Non-CO2 Compact Incubator Shaker -3mm

  •  7” high-res color touch screen with intuitive graphic interface
  • Innovative chamber design features smooth rounded internal corners for easy cleaning
  • Infra-Red (IR) CO2 sensor for precise and reliable CO2 detection
  • Optional WiFi and RS485 control
  • UV lights for easy sterilization
  • Audible and visual alarms
  • Mirror finish, pharmaceutical grade stainless steel chamber
  • Stackable design up to 3 units
  • Also available in 25mm and 50mm orbit models
  • Able to Stack with 25 and 50mm Orbit Models

Item#:
ASAEOLUSCO2NC2CIS

AEOLUS™ Compact CO2 Incubator Shaker

The CO2 Incubator Shaker features Temperature, Shaking, CO2 Concentration, and Humidity controls. Its' stackable design helps maximize floor space, with the capability to stack up to three units high.

Three axis eccentric balance system provides stable and reliable shaking. Terminal feedback system ensures precise shaking speed. Brushless DC motor is highly efficient, quiet, durable, and produces negligible heat that does not affect the chamber temperature. Combination of Proportional-Integral Derivative control and Fuzzy control for temperature ensure temperature accuracy within ±0.1°C.

Program mode allows user to set up to 12 segments of varying temperature and speed. Innovative design. Highly efficient inverter compressor refrigeration allows for temperatures as low as 18°C below room temperature with low energy consumption (minimum temperature of 4°C). Infrared CO2 sensor provides accurate and reliable CO2 detection (IS-ACMA only). Intuitive 7” capacitive touchscreen makes many functions, such as setting alarm parameters, easy to complete. Slide rail platform makes it easy to load and unload fixtures. Noise reduction design keeps the instrument noise level to 55 dB Wifi monitoring allows the user to stay in touch with the instrument even outside of the lab.


Features:

  • High Resolution 7-inch Color Touch Screen: Modular display presents instrument status and function values in a clear and concise manner. Innovative chamber design features smooth rounded internal corners for easy cleaning
  • Capacitive Touch Screen: The capacitive screen is more responsive and durable than a resistance screen as there is no reaction delay when the screen is pressed. Optional WiFi and RS485 control 2 Sets of UV lights for easy sterilization
  • Screen Lock: The display screen has an automatic lock screen with password protection function. This prevents any accidental or unauthorized alterations of the programmed operations or settings.
  • Pull Out Rail Platform: Operators can easily pull the platform out to load or unload fixtures. Only one locking handle in the middle of the platform makes the process fast and convenient.
  • Excellent Temperature Control Performance: When the incubator is at a stable temperature of 37°C, the uniformity is ±0.3°C.
  • Strong Cooling Capacity: The incubator chamber can be cooled to 18°C below the ambient temperature (Lowest temp is 4°C).
  • Inverter Compressor: Makes cooling a noiseless, durable, and highly efficient process while also saving energy.
  • Three Units Can Be Stacked: This product can be purchased as a single, double, or triple stack.
  • Bi-Directional Ultraviolet Sterilization: The chamber is equipped with two sets of UV sterilization light components to enhance the germicidal irradiation effect and reach all areas of the chamber.
  • Ultra Quiet Design: The noise level is less than 55dB when incubator is running and cooling (loudest process), providing a quiet environment for the operator.
  • Slow Acceleration and Deceleration: Shaking function starts and stops slowly to prevent large shear forces on the bacteria or cells. High Pressure Water Rinse: Both the platform and chamber feature an integrated draining system that is fast and efficient.
  • Efficient and Durable Insulation: Foamed Polyurethane insulation provides advanced thermal insulation. The material is also air-tight, waterproof, lightweight, shockproof, electrically insulated, heat resistant, cold resistant, and solvent resistant

 
Item#:
ASISACMA
|◀ ◀ 1 - 5 of 5 ▶ ▶|
View: