Home  >  Tubes/Racks  >  Racks and Boxes
|◀ ◀ 1 - 12 of 51 ▶ ▶|
View:

 
PR1MA™ Microcentrifuge Tube Aluminum Cooler Racks

 

  • Keep Microcentrifuge Tubes cold or hot on the bench
  • Non-Skid rubber feet provide a stable platform for loading samples
  • Gets cold in as few as 25 minutes
  • Samples stay cold on your bench top for up to an hour
  • Small footprint minimizes bench top and freezer space used
  • Precisely drilled wells allow for maximum heat transfer between the block and samples

 

Item#:
ASALUMRCKS


PR1MA™ Cryo Tube Aluminum Cooler Rack

 

  • Keep Cryo Tubes cold on the bench
  • Non-Skid rubber feet provide a stable platform for loading samples
  • Gets cold in as few as 25 minutes
  • Samples stay cold on your bench top for up to an hour
  • Small footprint minimizes bench top and freezer space used
  • Precisely drilled wells allow for maximum heat transfer between the block and samples


Item#:
ASCRYOPCRBLK

PR1MA™ PCR Aluminum Cooler Racks

  • Keep PCR Tubes, Strip Tubes, and PCR Plates (96 & 384) cold or hot on the bench.
  • Non-Skid rubber feet provide a stable platform for loading samples.
  • Gets cold in as few as 25 minutes.
  • Samples stay cold on your bench top for up to an hour.
  • Small footprint minimizes bench top and freezer space used
  • Precisely drilled wells allow for maximum heat transfer between the block and samples



Specifications 

 

Item #Capacity (Vol)ColorType of RackQty
RACK-384For 384 platesSilverTemp Control on Bench1 Rack
RACK-9696 x 0.2 mLSilverTemp Control on Bench1 Rack
RACK-96-B96 x 0.2 mLBlueTemp Control on Bench1 Rack
RACK-96-G96 x 0.2 mLGreenTemp Control on Bench1 Rack
RACK-96-P96 x 0.2 mLPurpleTemp Control on Bench1 Rack
RACK-96-R96 x 0.2 mLRedTemp Control on Bench1 Rack
RACK-96-RB96 x 0.2 mLAssorted PackTemp Control on Bench5 Racks
Item#:
ASPCRALUMRCK



PR1MA™ Card Board Freezer Boxes and Inserts

  • Used for upright freezer or chest freezer racks
  • Temperature Range: -196 to +121ºC
  • Box has drain holes on bottom and a writing area on the lid
  • Standard 5.25 x 5.25 x 2-inch format, Also available in 3 and 4 inch format
  • Available cell dividers: 144, 100, 81, 64, 49, 36, 25, or 16

Specifications

Cardboard Boxes
Item NumberDescriptionDimension L x D x H
SB2CCStandard White 2" Cardboard Box5.25 x 5.25 x 2 in.
SB2CC-XX*Standard White 2" Box w/cell divider
SB2CStandard Yellow 2" Cardboard Box
SB2C-XX*Standard Yellow 2" Cardboard Box w/cell divider
SB3CStandard White 3" Cardboard Box5.25 x 5.25 x 2.937 in.
SB3C-XX*Standard White 3" Cardboard Box w/cell divider
SB4CStandard White 4" Cardboard Box5.81 x 5.81 x 4.84 in.
SB4-XX*Standard White 4" Cardboard Box w/ cell divider
*xx=number of dividers (144,100,81,64,49,36,25,16)
Standard Box Dividers for Cardboard and Metal Boxes
Item NumberDescriptionDimensions L x D x H
CD-16Box Divider, 16-Cells4.857 x 4.857 x 1.312 in.
CD-25Box Divider, 25-Cells
CD-36Box Divider, 36-Cells
CD-49Box Divider, 49-Cells
CD-64Box Divider, 64-Cells
CD-81Box Divider, 81-Cells
CD-100Box Divider, 100-Cells
CD-144Box Divider, 144-Cells
CD4-16Box Divider, 16-Cells5.375 x 5.375 x 2.75 in.
CD4-36Box Divider, 36-Cells

 

Item#:
ASCARDBOARDRK


PR1MA™ CoolCube™

  • Maintains 0°C for up to 4 hours
  • Also for use as a PCR workstation
  • Two sides, ideal for: 1.5 & 2.0 mL microtubes, 0.2 mL PCR tubes & strips, 96 well PCR plates 

The PR1MA™ CoolCube™ is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Simply place the CoolCube™ in a freezer overnight and it’s ready for use, keeping samples cold, but not frozen maintaining temperature at approximately 0° C for up to four hours.

Specifications

Temperature0°C for up to 4 hours
Capacity (side 1)36 x 1.5/2.0 mL tubes
Capacity (side 2)96 x 0.2 mL tubes, 12 x 0.2mL strips,
1 x 96 well PCR plate, 10 x 1.5/2.0 mL
Dimensions (W x D x H)5.6 x 5.6 x 2.5 in. | 14.3 x 14.3 x 6.4 cm
Weight2 lbs | 1 kg
Warranty2 years

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASCCFRZ

PR1MA™ Autoclavable Boxes

Benefits of PR1MA™ Autoclavable Boxes

  • Easy to stack and carry
  • Hinged lid
  • Fits our easy PR1MA™ reload/refill system
  • Won't tip over when you hit the corner tip
  • Easy to open with one hand

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASPR1MERCKS


Test Tube Racks

 

These autoclavable test tube racks are ideal for a variety of widely used laboratory tubes and vials. Manufactured in two sizes, these racks accommodate tubes ranging from 12 - 17 mm in diameter, including test tubes, culture tubes, FACS tubes, large cryogenic vials, transport vials and more. Shipped in an economical flat pack, these racks snap together to create a sturdy and durable workstation.


Molded alphanumeric grids along the sides assist in easy organization of samples. Available in 60 or 90 place, these heavy-duty polypropylene racks are autoclavable and can be safely used in water baths without floating.

  • 90-place (6 rows of 15) for 12-14 mm tubes
  • 60-place (5 rows of 12) for 15-17 mm tubes
  • Molded alphanumeric grids
  • Autoclavable polypropylene

 

Item#:
ASTESTTUBERK


80 - Well Racks

 

The popular fraction-collector-plate style racks keep tubes in large wells with conical bottoms. This easy-access design makes this rack ideal for freezer storage and organization. Available in natural, blue, green, pink, yellow, orange, or assorted colors (one of each).

  • Holds 1.5 to 2.0 mL microtubes
  • Versatile & efficient storage in bright, fluorescent colors
  • Durable Polypropylene Construction
  • Autoclavable

Specifications

 Dimensions
(D x W x H)		226 x 67 x 28 mm
8.90 x 2.64 x 1.10 in.
Max Tube
Dimensions		11 x 26 mm
0.43 x 1.02 in.
Tube SizeHolds 1.5 to 2.0 mL Microtubes
Formation80 Wells, 5 x 16

Proudly made in the USA! Click here for more made in America products! 

Item#:
AS80WELLRK


96-Well PCR Rack

 

  • 96-well, 8 x 12 format
  • Holds 0.2ml PCR tubes, strip tubes, and plates (does not fit full skirted plates)
  • Supplied with clear lift-off lids

 

Proudly made in the USA! Click here for more made in America products!

Item#:
ASPCRRCKS4

Pipette Racks

Available in acrylic or ABS plastic 

Both versions hold 0.1 to 25 mL pipets or cans. Racks feature four angled compartments. The ABS plastic version comes with optional attachments to hold pipet bulbs and pipet fillers on both sides of the rack. Cut-out "windows" on the ABS version makes the viewing of enclosed pipets easy. Magnetized version has strong magnets on both sides and mounts securely on fume hoods, file cabinets, and refrigerators. Measures 3.5 x 11.5 x 16".
 

Item #Description
HS20611Clear Acrylic Manual Pipet Rack
HS20612Blue ABS Manual Pipet Rack
HS20613Red ABS Manual Pipet Rack
Item#:
ASPIPRK


4 Way Flipper® Rack

  • Supports a variety of different tube sizes and styles
  • Withstands autoclaving, freezing, or use in Water baths
  • Small footprint - easily used under a hood or on a benchtop
  • Assorted Fluorescent Colors: Blue, Green, Orange, Pink, Yellow

Each rack can be rotated to support a variety of tube sizes including:

  • 4 x 50 mL conical tubes
  • 12 x 15 mL conical tubes
  • 32 x 1.5 / 2.0 mL microtubes
  • 32 x 0.5 mL microtubes

Proudly made in the USA! Click here for more made in America products!

Item#:
ASMULTCONFIG


PCR Stackable Rack

 

Removable Rack holds standard plate tubes or strip tubes. Designed for convenience & versatility, this rack can be used while you are working or as a storage rack. Ideal platform to satisfy all pre- or post-PCR sampling applications. Available in assorted fluorescent colors: Blue, Green, Orange, Yellow, and Pink.

  • Tube wells are alpha-numerically matrixed with raised bold type for quick identification
  • Four retainer clips hold the tray firmly in place, yet allow fast and convenient removal when necessary
  • Supplied with clear lift-off lids

Specifications

Dimensions w/ Lid
(D x W x H)		170 x 110 x 105 mm
6.69 x 4.33 x 4.13 in.
Dimensions w/o Lid
(D x W x H)		170 x 110 x 78 mm
6.69 x 4.33 x 3.07 in.
Tube Size and FormationHolds 32  0.2 mL PCR Tubes, or
24  1.5 / 2.0 mL Microtubes, or
16  0.5 mL Microtubes

Proudly made in the USA! Click here for more made in America products!

 
Item#:
ASPCRRCKS3
|◀ ◀ 1 - 12 of 51 ▶ ▶|
View: