PR1MA™ Acrylamide

CAS Number: 79-06-1
Molecular Weight: 71.1
Chemical Formula: C₃H₅NO
Solubility: Water
Storage Temperature: Room Temperature

WARNING! This product can expose you to Acrylamide, a chemical which is known to the State of California to cause cancer, developmental and reproductive harm. For more information go to www.P65Warnings.ca.gov.


Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Acrylic Acid : ≤ 10 ppm
• Assay: ≥ 99.9 %
• Conductivity: ≤ 3.5 µmhos
• DNase, RNase, protease: Not Detected
• Electrophoresis: Pass Test
• Iron: ≤ 1 ppm
• Lead: ≤ 1 ppm
• Magnesium: ≤ 1 ppm
• Melting Point: 84.0 - 86.0 ^oC
• pH (10%, 0.1 M NaCl @ 25 ^oC) : 6.5 - 7.5
• Solubility (40% Aqueous Solution): Clear and colorless

Benchmark™ Black Friday 2024 Promo!

For a limited time, buy ONE pack of EZ Pack™ Agarose Tablets (A2501) and get ONE FREE!

See flyer for more details.

 

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

Use item number +"-VF" or promo code TURKEY24
 

EZ Pack™ Agarose Tablets

• Eliminates weighing
• Fast dissolving, just two minutes
• Environmentally friendly, free from organic solvents
• Consistent, reproducible gels
• Enhanced resolution and clarity 

Researchers trust Benchmark’s Agarose LE to meet their electrophoretic needs for various applications. Now, the same agarose is available in a convenient, no-mess tablet.

Agarose LE is refined in an advanced process that excludes the use of organic solvents. The result is a cleaner end product with significantly reduced environmental impact. The agarose can be used for analyses of nucleic acids from 150 bp to 25,000 bp, protein electrophoresis, and various blotting protocols.

The low EEO of the agarose promotes increased electrophoretic mobility, yielding improved resolution and shorter run times. This also allows macromolecules and larger particles (subcellular fragments, viruses, etc.) to migrate more freely through the gel matrix. The consistently low EEO reduces band distortion (caused by counterflow) that can result from the presence of excessive sulfate-rich negative ions. The quick-dissolving EZ Pack™ tablet contains 0.5 g (500 mg) of Agarose LE, eliminating the hands-on time and inaccuracies normally associated with weighing. Use of the tablet is not only convenient and cleaner, but it also provides better consistency and reproducibility gel to gel.

Gel preparation is simple – add the desired number of tablets to the electrophoresis buffer, allow it to sit for two minutes, and then heat and pour as usual. The resulting gels are highly transparent, have exceptional thermal stability (ensuring safe and easy handling), and exhibit exceptionally low absorption of chemical staining agents.

EZ Pack™ Agarose Tablets are supplied in convenient blister packs for safe, clean dispensing.

Specifications
 

Gel Temperature	36°C ± 1.5°C (1.5%)
Melt Temperature	88°C ± 1.5°C (1.5%)
EEO (-mr)	< 0.13
Moisture Content	< 10%
Sulfate	< 0.2%
RNase/DNase	None Detected
Protease/Endonuclease	None Detected
Storage Conditions	Room Temperature
Gel Strength	> 1200 g / cm2 (1%) > 2500 g / cm2 (1.5%)

 

Buffer volume required to achieve desired gel strength
GEL %	0.8%	1.0%	1.2%	1.3%	1.5%	1.8%	2.0%
1 Tab	63 mL	50 mL	42 mL	38 mL	33 mL	28 mL	25 mL
2 Tabs	125 mL	100 mL	83 mL	77 mL	67 mL	56 mL	50 mL
3 Tabs	188 mL	150 mL	125 mL	115 mL	100 mL	83 mL	75 mL

Kappa is now PR1MA™ - Same great product, new name
Looking for something else? Email tech@midsci.com. If we can get it, we will add it to the website.

 

PR1MA™ Agarose, Low Melt Temperature

CAS Number: 9012-36-6
Solubility: Water
Storage Temperature: Room Temperature

Ideal gelling properties for use in cloning assays or for recovery of heat labile samples following electrophoresis.


Gel Strength, 1%: >200 g/cm2
Gelling Temperature: 26-30°C
Melting Temperature: <65°C
Sulfate: <0.10%
EEO: <0.10
DNase and RNase: None Detected


Research or further manufacturing use only, not for food or drug use.
 

• Appearance: White to off white powder
• DNase/ RNase: Not Detected
• EEO: ≤ 0.10 -Mr
• Gelling Temperature: 26 - 30 ^oC
• Gel Strength : ≥ 200 g/cm²
• Melting Temperature: ≤ 65 ^oC
• Moisture Content: ≤ 10 %
• Sulfate Content: ≤ 0.10 %

PR1MA™ Terrific Broth Modified Capsules

CAS Number: 91079-40-2; 8013-01-2; 7778-77-0; 7758-11-4
Solubility: Water
Storage Temperature: Room Temperature

Terrific Broth formulation packaged in easy to use 24 gram capsules. Formulation from powder.


Add 1 capsule per 500ml of water. Heat and stir until capsules are completely dissolved. Add 2ml of glycerol to mixture. Sterilize by autoclaving for 15 minutes.


Ingredients:

• Casein Digest Peptone: 12 g/L
• Yeast Extract: 24 g/L
• Dipotassium Phosphate: 9.4 g/L
• Potassium Phosphate: 2.2 g/L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Water soluble gelatin capsules containing cream to beige free flowing powder.
• Appearance of Solution: Prepared medium is light to medium amber and clear
• pH (4.76% solution at 25°C): 7.0 - 7.4
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Good to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent
• Yeast Extract: 24.0 g/L
• Casein Peptone: 12.0 g/L
• Potassium phosphate dibasic: 9.4 g/L
• Potassium phosphate monobasic: 2.2 g/L
• Direction (Preparation): Add 2 capsules to one liter of purified water until evenly dispersed. Add 4ml of Glycerol to the mixture. Boil for one minute with stirring to completely dissolve. Distribute and autoclave at 121°C for 15 minutes.

PR1MA™ LB Broth 20 Gram Buffered Capsules [Lennox L Broth]

Common Name: Lennox L Broth
Solubility: Water
Storage Temperature: Room Temperature

RPI media is now available in convenient premeasured and pre-mixed capsules. Prebuffered media eliminates pH adjustments, dust and smells from the lab. Low Salt Formula. Molecular Biology Grade.


For propagation and maintenance of E.Coli:

• Add 1 capsule per liter of water.
• Heat and stir until capsule is completely dissolved.
• Buffer is set for 7.2 at 20°C using a 10mM solution of TRIS/TRIS HCl
• Sterilize by autoclaving for 15 minutes.

Ingredients:

• Tryptone: 10 g/L
• Yeast Extract: 5 g/L
• Sodium Chloride: 5 g/L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Capsules
• Appearance of Solution: Prepared medium is yellow to gold and clear to moderately hazy
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Fair to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent

PR1MA™  Potassium Phosphate, Dibasic, Anhydrous

CAS Number: 7758-11-4
Molecular Weight: 174.2
Chemical Formula: K₂HPO₄
Solubility: Water
Storage Temperature: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Powder
• Assay: ≥ 98.0 %
• Chloride: ≤ 0.003 %
• Heavy Metals : ≤ 5 ppm
• Insoluble Matter: ≤ 0.01 %
• Iron (Fe): ≤ 0.001 %
• Loss on Drying @150 ^oC: ≤ 1.0 %
• Nitrogen Compound: ≤ 0.001 %
• pH (5%): 8.5 - 9.6
• Sodium (Na): ≤ 0.05 %
• Sulfate: ≤ 0.005 %

PR1MA™  Tetracycline Hydrochloride

• Appearance: Yellow, Crystalline Powder
• Identification (A, B, C): Pass Test
• Specific Rotation: -255 - - 240 °
• Crystallinity: Meets with specification
• pH (1% Solution): 1.8 - 2.8
• Loss on Drying (105 ^oC): ≤ 2.0 %
• Epitetracycline: ≤ 3.0 %
• 4-Ephianhydrotetracyline: ≤ 2.0 %
• Anhydrotetracycline: ≤ 0.5 %
• 2-Acetyl-2-Decarbamoyltetracycline: ≤ 1.5 %
• Chlortetracycline: ≤ 0.5 %
• Sum of impurities other than epitetracycline: ≤ 5.0 %
• Assay of Tetracycline Hydrochloride (On Dried Basis): ≥ 900 µg/mg
• Residual Solvent (1-Butanol): ≤ 5000 ppm
• Residual Solvent (Acetone): ≤ 500 ppm
• Grade: USP
• Country of Origin: Report

PR1MA™ Nematode Growth Medium

Common Name: Nematode Growth Medium

Solubility: Water with Heat

Storage Temperature: Room Temperature

A standard formulation for use in Nematode growth studies.

Contains:

Agar 17.5 g/l
Sodium Chloride 3.0 g/l
Peptone 2.5 g/l
Cholesterol 0.005 g/l
Shipping Dimensions: 3.50 x 3.75 x 3.50
Shipping Weight: 1.2 lbs
 

Research or further manufacturing use only, not for food or drug use.

Specifications

• Appearance: Light tan to pale yellow powder
• Solubility: Clear Solution
• pH (2.3% Solution @25 oC): Report
• Agar: 17.5 g/l
• Sodium Chloride: 3.0 g/l
• Peptone: 2.5 g/l
• Cholesterol: 0.005 g/l

PR1MA™  Trimethoprim

CAS Number: 738-70-5
Molecular Weight: 290.3
Chemical Formula: C₁₄H₁₈N₄O₃
Solubility: DMSO 50mg/ml, Methanol 12:1 mg/ml, Water 0.4 mg/ml
Storage Temperature: 2-8°C

Inhibits dihydrofolate reductase. Active against most gram negative and gram positive aerobic bacteria.


Research or further manufacturing use only, not for food or drug use.

• Appearance: Off White to Light Yellow Crystalline Powder
• Assay (Anhydrous): 98.5 - 101 %
• Heavy Metals : ≤ 20 ppm
• Loss on Drying: ≤ 1.0 %
• Melting Point: 199 - 203 ^oC
• Related Substances: ≤ 0.2 %
• Sulfated Ash: ≤ 0.1 %

PR1MA™ SOB Broth

Solubility: Water
Storage Temperature: Room Temperature

SOB Broth is recommended for use in cultivation of recombinant strains of E. Coli. It is a nutritionally rich growth medium for use in the preparation and transformation of competent cells.


Add 28 grams of Broth in 1 liter of distilled water. Heat gently to dissolve the medium completely. Dispense in tubes and sterilize by autoclaving for 15 minutes.


Ingredients:

• Casein Enzymic Hydrolysate: 20 g/L
• Magnesium Sulfate: 2.4 g/L
• Yeast Extract: 5 g/L
• Potassium Chloride: 0.186 g/L
• Sodium Chloride: 0.5 g/L
• Final pH(25°:C): 7.0+0.2

• DCM Appearance: Homogeneous Free Flowing,Light Beige
• PPM Appearance: Clear, no to light ppt, light yellow
• pH (2.8 % Solution @25 ^oC): 6.8 - 7.2
• Microorganism (E. coli ATCC 23724): Good to Excellent
• Microorganism (E. coli ATCC 33694): Good to Excellent
• Microorganism (E. coli ATCC 33849): Good to Excellent
• Microorganism (E. coli ATCC 39403): Good to Excellent
• Microorganism (E. coli ATCC 47014): Good to Excellent
• Microorganism (E. coli ATCC 53868): Good to Excellent

PR1MA™ Tween 20

Common Name: Polyoxyethylenesorbitan Monolaurate
CAS Number: 9005-64-5
Solubility: Water
Storage Temperature: Room Temperature

Fatty acid composition:

• Lauric acid: Approximately 50%
• Balance: Myristic, Palmitic and Stearic acids.

Shipping Weight: 1.2 lbs
Shipping Dimensions: 2.00 x 6.00 x 2.00

Specifications

Appearance: Yellow to amber viscous liquid
1,4-Dioxane: ≤ 10 ppm
Acid Value: ≤ 2.20 mg KOH/g
Color, Gardner: ≤ 5.0
Hydroxyl Value: 96 - 108 mgKOH/g
Saponification Value: 40.0 - 50.0 mg KOH/g
Water: ≤ 3.00 %

Research or further manufacturing use only, not for food or drug use.

PR1MA™ Sulfamethoxazole

CAS Number: 723-46-6
Molecular Weight: 253.3
Chemical Formula: C₁₀H₁₁N₃O₃S
Solubility: Acetone
Storage Temperature: Room Temperature

Bacteriostatic antibiotic that inhibits nucleic acid synthesis in sensitive micro-organisms.


Research or further manufacturing use only, not for food or drug use.

• Appearance: White to Off White Crystalline Powder
• Infrared Spectrum: Conforms to Structure
• Loss on Drying: ≤ 0.5 %
• Residue on Ignition: ≤ 0.1 %
• Related Substance (Sulfanilic acid): ≤ 0.10 %
• Related Substance (Sulfanilamide): ≤ 0.10 %
• Related Substance (Impurity C, A): ≤ 0.10 %
• Related Substance (Impurity B): ≤ 0.10 %
• Related Substance (Impurity F): ≤ 0.10 %
• Any other Impurity: ≤ 0.10 %
• Total impurities: ≤ 0.30 %
• Assay (Titration): 99.0 - 101.0 %
• Grade: USP
• Country of Origin: Report