The PR1MA™ Mini is a personal centrifuge that virtually fits in the palm of your hand. An eight-place rotor is included and comes installed. A second rotor for 0.2 mL PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge.
All centrifuges include the 8 x 1.5/2.0 mL microtube rotor, two position PCR strip rotor, and 8 adapters for 0.5 mL tubes.
Spin microtubes and PCR strips simultaneously without changing rotors! Unlike traditional mini centrifuges, the PR1MA™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously. COMBI-Rotor™, for tubes and strips
The myFuge?5 comes with a 4 position rotor for compatibility with both 1.5mL and 5mL centrifuge tubes and a variety of 5 mL test tubes with the included adapters. The rotor accepts 5mL snap cap microcentrifuge tubes and with the included adapters can also accept 5mL blood, culture tubes (12x75mm), and cryovials. Adapter packs are also available to purchase separately for the 0.5mL and 0.2 mL tubes. Simply close the lid and centrifuge accelerates quickly to a fixed speed of 5,500 rpm. Once the lid is opened, the rotor with decelerate to allow for the removal of the tubes.
Technical Specifications
Speed
5500 rpm/2000xg
Capacity (with included adapters-- other adapters sold seperately)
4 x 5 mL tubes and 4 x 1.5/2.0 mL tubes
Dimensions (WxDxH)
14x20x14cm
Weight
2.2
Warranty
2 year
These personal centrifuges are ideal for quick spins, microfiltration of samples, cell separations, and other routine laboratory procedures.Specifications:
Prior to scanning a microaray slide, it is necessary to remove all wash buffer. This drying step is critical to obtain the best possible scanning results. Labnet's new Slide Spinner dries 2 microarray slides within a 10 seconds. Simply insert your slides into the cassettes and close the lid. This Slide Spinner quickly accelerated to 4800 RPM, the optimal speed for quick drying without any splashing. Open the lid and the rotor comes to a stop and the dry slides can be removed. The cassettes catch all of the liquid, and can easily be removed, and the liquid can be poured out.
GCM-B (Blue) GCM-G (Green) GCM-R (Red)
The GCM Series was designed with your lab in mind... whether you spin-down microcentrifuge tubes, PCR tubes or PCR Strips, the GCM will provide you with reliable performance use after use. Operating the GCM is quick and easy; close the lid to accelerate to 7,000rpm and simply open the lid for quick deceleration to stop.
Included in all GCM Mini Centrifuges are an eight (8) position microcentrifuge tube rotor for 1.5 / 2.0mL tubes, a PCR tube rotor that accommodates 0.2mL tubes and strips as well as eight (8) adapters for 0.2mL tubes and eight (8) adapters for 0.5mL tubes. Changing rotors requires no tools - simply pull up to remove and press down to replace.
Features:
Technical Data:
Specifications
GCM Series
Maximum Speed
7000rpm (fixed)
Maximum RCF
2,680 x G
Rotor Capacity
Eight (8) 0.2 / 0.5 / 1.5 / 2.0mL Tubes Sixteen (16) 0.2mL PCR Tubes Two (2) 0.2mL PCR 8 Strips
Run Time
Continuous operation
Power
20W
Noise Level
<45dB
Dimension (W x D x H)
160 x 170 x 122mm (6.3 x 6.7 x 4.8")
0.5 Kg (1.1 lbs)
Certifications
CE, cTÜVus, FCC, MCA
2 Years
Centrifuge Acessories:
GCM-ROT: Rotor for GCM Series Mini Centrifuges, 7000rpm, 8-Place for 1.5 & 2.0mL tubes
StripSpin 12 Mini Centrifuge has been discontinued. A replacement model (C2248) can be found here. StripSpin? 12 Mini Centrifuge
Specifications:
5,500 rpm / 2,000 xg
4 x 12 position PCR strips
Capacity:
4 x 8 position PCR strips
48 x 0.2ml PCR tubes
Dimensions:
5.5 x 7.9 x 4.4 in.
(w x d x h)
14 x 20 x 11.2 cm
Weight:
2.2 lbs. / 1 kg
Electrical:
Universal Voltage
100-240V, 50-60 Hz, 300W
Warranty:
1 Year
FlexiFuge is a versatile, personal micro-centrifuge for quick, low speed centrifugation. Whisper quiet motor offers two speeds (2000g / 5,000g or 9,200 RPM ) depending on application. Flexifuge can be operated in continuous mode, pulsed for a short burst of rapid centrifugation, or timed to spin from 1-15 minutes.
Regardless of setting, rotors stop once the lid release button is pushed. A ring of LED lights illuminate when the unit is active and can be viewed through the transparent lid. Color can be changed (red, green, blue) or turned off by a switch under the unit. Flexifuge is supplied with an 8-Place fixed angle rotor for 1.5ml tubes, a rotor for (2) 8x0.2ml PCR tube strips, 8 adapters for 0.5ml tubes and a 4-place rotor to spin 5ml micro-centrifuge tubes.
1 Year Warranty
Labnet Mini Microcentrifuge
Simple and convenient to operate, the new Labnet mini microcentrifuges feature greater capacity (8-place MCT and 4-place PCR strip rotors), a quick-release rotor system and electronic brake.Once samples are loaded and the lid is closed, the rotor rapidly accelerates to 6,000 rpm, making it an ideal centrifuge for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.
6,000 rpm / 2,000 xg
Maximum Capacity
8 x 1.5/2.0 mL or 4 x 0.2 mL strips
Dimensions
6.8 x 5.8 x 4.8 in | 17.2 x 14.7 x 12.2 cm
Electrical
AC 100 - 240 V, 50/60 Hz