Looking for large quantities? You can find them here.
(sold by the master case)

ZAP^™ Slik Aerosol Filter Pipette Tips

Each style of ZAP™ SLIK Tips is designed from the beginning to fit precisely the range of pipettors listed in the fit charts. We carefully inspect the fitting with the actual pipettors, not just with measuring gauges. This means you won’t have to worry about leaking Tips and you don’t have to use extra force to mount these Tips.
 

ZAP™ SLIK tips feature a pure 10µm pore size patented filter without any dyes or additives. The pores on this filter are 100% smaller than those in other aerosol tip brands. A smaller pore guarantees that your pipettor barrel will be kept clean of DNA, radionucleotides, and other contaminants. And this filter works to block fluids without any contaminants in the filter so you never have to worry that your work will be spoiled if your sample contacts the filter.

Real World Lab Tested

Labcon^® ZAP™ Slik Tips are developed using their own in-house laboratory and tested on real pipettors. they don't use "pin" gauges or other unrealistic testing methods.

Quality Certification

Certificates are on file by lot number for all test results and available from the certificates page.

Virgin Resin

Only 100% Medical Grade virgin polypropylene resins are used in ZAP™ Slik Tips. No recycled plastics or commodity-grade resins.

FDA Registered Manufacturing

Labcon^® is the only major pipet tip supplier to be registered by the U.S. Food and Drug Administration (FDA)

Sustainable Product Design

Like all Labcon^® products, Eclipse tips are designed from the beginning with sustainability in mind. These products go far beyond simple recycling to offer real Earth Friendly^® solutions.

APT™ Automation Pipette Tips

Labcon automation pipet tips APT™ for Beckman® FX, NX and other brands are designed and tested to fit your workstation. Made from pure pre-tested medical grade resins to ensure the integrity of your work. Each lot is tested and certified free of ATP, RNase/DNase (Nuclease), and Endotoxins (non-pyrogenic). Resins are pre-tested with a USP test method to ensure they are free of Oleamide and Phalates. Unlike tips sold as “pre-sterile” these tips use a validated medical grade sterilization process. You can use these tips in diagnostics, regulated testing, and medical screening procedures.

Labcon Robotic Pipette Tips are made of virgin polypropylene and furnished pre-racked in extra-heavy automation grade polypropylene racks and are autoclavable.
 

8005 – P30 AP384 Style, 30 µL capacity
8014 – P20 AP96 Style, 100 µL capacity
8114 – P20 AP96 Style, with Filter, 100 µL capacity
8024 – P50XL AP96 Style, 90 µL capacity
8017 – P250XL AP96 Style, 220 µL capacity
8117 – P250XL AP96 Style, with Filter, 220 µL capacity

ECLIPSE™ Pipette Tips

Labcon Eclipse™ pipette tips include as standard many features available from other suppliers only as special upgrades. All the Eclipse™ tips we make are made of high quality 100% pure virgin medical grade polypropylene, so you won't find recycled plastics in our tips. We pre-test the resin to ensure no extractables are present. Every lot is lab tested and certified free of detectable Nuclease (RNase/DNase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for metal contamination. All our Eclipse™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse™ refills, and in racks that have been sterilized using irradiation. 

1036 – 10 μL Pipette Tips with Extended Length and Pipettor Protection

• Longer than most 10uL tips for reaching into 0.65mL Tubes
• Features a solid ring that prevents the pipettor barrel from touch the sides of microtubes
• UltraFine™ Tips
• Clear 100% Polyproylene

• For use with sticky DNA or other viscous materials
• Non-beveled and flexible
• UltraFine™ Tips
• Green Polypropylene

• Longer than most 10 μL tips to allow to reach down 0.65 mL tubes and multi-well plates
• Fine thin capillary section at the end that is non-beveled and very flexible
• Fits most popular 10 μL pipettors

• Extra-wide opening for use with macrophages or sticky DNA materials
• Bevel helps prevent carry-over from viscous solutions
• Clear polypropylene

• Versatile – fit all major pipettors
• Bevel ends retain less fluid
• Yellow polypropylene

• Versatile – fit all major pipettors
• Perfect when a traditional blunt cut end style is desirable
• Yellow polypropylene

• Versatile – Fit all major pipettors
• Include long thin capillary sections for use in nuclease acid sequencing
• Available with 30mm capillary
• Clear polypropylene

• Versatile – Fit all major pipettors
• Traditional blunt cut end style
• Clear polypropylene

• Versatile – fit all major pipettors
• Bevel ends retain less fluid
• Clear polypropylene

• For use with sticky DNA or other viscous materials
• Non-beveled and flexible
• Green Polypropylene

• Thinner flexible wall with a fine non-beveled point
• Fits most 200μL or 250μL Pipettors
• Clear Polypropylene

• Feature a short fine tip
• Fit most 300μL  Pipettors
• Clear Polypropylene

• Fits most 1000μL Pipettors
• Fine beveled dispensing end
• Longer than most other 1000μL Tips
• Blue Polypropylene

Eclipse Macro Volume Pipette Tips

• Designed to fit macro volume pipettors
• Made of clear, 100% polypropylene
• Autoclavable (122°C)
• Available in resealable bags or composite racks

1025 - 5 mL Graduated Macro Pipette Tips for Gilson™ and Rainin™ Macro Pipettors

1027 - 5 mL Graduated Macro Pipette Tips for Sartorius™ and Eppendorf™ Pipettors

1028 - 5 mL Macro Pipette Tips for Macro Pipettors

1029 - 10 mL Pipette Tips for Macro Pipettors

Eclipse Graduated Pipette Tips

1038  Graduated 10L Pipette Tips with UltraFine Tips

• Fine thin capillary section at the end that is non-beveled and very flexible
• Chamfered top entry for easy mounting onto different brands of pipettors
• Polypropylene
• Graduated to show 2L to 10L

1093  200L Graduated Bevel Point Pipette Tips, Clear

• Universal  tips fit all major pipettors
• Graduations outside of tip
• Smooth beveled ends for retaining less fluid
• Wide sealing areas for use with older pipettors

1046  1000L Graduated UltraFine Pipette Tips

• Fits most 1000L pipettors
• Find end point that fits into 0.65mL micro tubes
• Graduated
• Clear Polypropylene

Black Friday 2024 Promo!

For a limited time, buy select Overstock Labcon Tips for huge discounts!

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

ZAP™ Aerosol Filter Pipette Tips

ZAP™ Aerosol filter Pipette Tips from Labcon set a higher standard for your lab than ordinary filter pipette tips. These aerosol tips provide you with complete protection from sample carry-over. Incorporating a robotically inserted 10 μm filter with a sponge-like porous pathway. ZAP™ tips have such a small pore they even block fluids in the unlikely event that you should over pipette. ZAP™ Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination but unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum , toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips ZAP™ tips can be autoclaved in a steam autoclave. And they will not wick fluids like cellulose filled aerosol resistant tips, so you don't have to worry about how you hold your pipettor. Our ZAP™ tips in sterile racks, like all our other products, have received valid sterilization processing compliant with ISO 11137. So unlike "pre-sterilized" or "irradiated" pipette tips Labcon ZAP™ Aerosol Tips are sterile and are not limited to Research Use Only.

1051 - 10 µL ZAP™ Pipette Tips with UltraFine™ Point and Graduations at 2, 10 µL
1151 - 10 µL Extended Length ZAP™ Pipette Tips with TubeGuard™ Ring
1191 - 10 µL Extra-Long ZAP™ Pipette Tips with UltraFine™ Point
1150 - 10 µL ZAP™ Pipette Tips with UltraFine™ Point
1091 - 10 µL ZAP™ Pipette Tips with Graduations at 10 µL
1153 - 20 µL ZAP™ Pipette Tips for Rainin® LTS™ Pipettors
1055 - 20 µL ZAP™ Pipette Tips with Bevel Point™
1096 - 100 µL ZAP™ Pipette Tips with Graduations at 10, 20, 50 µL and UltraFine™ Point
1053 - 50 µL ZAP™ Pipette Tips with Bevel Point™
1054 - 100 µL Eppendorf Style ZAP™ Pipette Tips with Bevel Point™
1092 - 100 µL ZAP™ Pipette Tips with Bevel Point™ and Graduations at 10, 20, 50, and 100 µL
1094 - 100 µL ZAP™ Pipette Tips with Bevel Point™
1056 - 150 µL ZAP™ Pipette Tips with Bevel Point™
1059 - 200 µL ZAP™ Pipette Tips with Bevel Point™
1098 - 100 µL ZAP™ Pipette Tips with UltraFine™ Point and Extended Length
1152 - 200 µL ZAP™ Pipette Tips Wide Orifice for Whole Cells with Bevel Point™
1156 - 200 µL ZAP™ Pipette Tips with UltraFine™ Point
1154 - 200 µL ZAP™ Pipette Tips for Rainin® LTS™ Pipettors
1058 - 300 µL ZAP™ Pipette Tips with Bevel Point™
1193 - 300 µL ZAP™ Pipette Tips for Rainin® LTS™ Pipettors
1155 - 1000 µL ZAP™ Pipette Tips for Rainin® LTS™ Pipettors
 

Packaging

Individually Wrapped
Packaged in thermal sealed polyethylene bags.  These tips have been radiation sterilized.  This package is designed to provide the highest assurance that the tips you use are pure.

96 Rack
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. 

Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips.  These refills use a validated sterile process and include an expiration date on every pack.  Eclipse packaging in made exclusively from recyclable and renewable materials.
 

Black Friday 2024 Promo!

For a limited time, buy select Overstock Labcon Tips for huge discounts!

Promo is valid from 11/04/24 - 12/06/24 

All promotions are valid while supplies last. Prices are subject to change without notice.
 Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

Eclipse™ Pipette Tips
 
Eclipse™ pipette tips include as standard many features available from other suppliers only as special upgrades. All the Eclipse™ tips we make are made of high quality 100% pure virgin medical grade polypropylene, so you won't find recycled plastics in our tips. We pre-test the resin to ensure no extractables are present. Every lot is lab tested and certified free of detectable Nuclease (RNase/DNase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for metal contamination. All our Eclipse™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse™ refills, and in racks that have been sterilized using irradiation.

For Rainin® LTS Pipettors

1011- 20µL Pipette Tips
1018- 250µL Pipette Tips
1015- 300µL Pipette Tips
1019- 1200µL Pipette Tips

• Fits the Lite Touch™ pipettors from Rainin®
• Made of clear, pretested polypropylene resin
• Lot certified pure and free of detectable ATP, RNase/DNase (Nuclease), Endotoxin and are non-pyrogenic

For Eppendorf and Brand Pipettors

1032- 100µL Bevel Point™ Pipette Tips, Yellow

• Ribbed top ensures solid ejection
• Beveled end retains less fluid
• Designed with wide sealing areas to fit even older pipettor barrels
• Available in yellow polypropylene

For Sartorius®  Pipettors

1048- 1200µL Pipette Tips with UltraFine™ Points
1044- 1250µL Pipette Tips with UltraFine™ Points

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For Matrix®  Impact 2®  Pipettors

1047- 1250µL Pipette Tips with UltraFine™ Point, Extra Length

• Fine end point that fits into small micro tubes and deep well plates
• Extra length gives you more head room above the sample to prevent contaminating the pipettor barrel
• Available in clear polypropylene

For 16-Channel Finnpipette Pipettors

1007- 50µL Pipette Tips with UltraFine™ Point

• Fill 384-well plates
  
• Very small but very straight tips in special heavy racks
  
• Clear, 100% polypropylene

 
Resealable Bags
Supplied in resealable polyethylene bags.  These are not recommended if you plan to store the tips for long periods since warping can occur after long periods of storage in bags.

96 Racks
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.

96 Stack Racks
This package gives you the best of both worlds; low cost and a complete high-quality rack.  You assemble the rack yourself and insert the fully racked refills into the rack.  Since you never touch the tips you don’t have to be concerned about contamination from your hands or latex gloves.  These stacks are very stable so you can pipette with a multi-channel pipette right from the stack.  

MIDSCI ITEM #	VWR ITEM #
1011-250-000-9	89368-956
1011-260-000-9	89079-436
1011-265-000-9	89079-438
1011-290-020-9	93000-008
1011-700-008-9	89495-432
1011-790-008-9	N/A
1011-795-008-9	N/A
1011-800-000-9	83009-698
1011-960-008-9	83009-694
1011-965-008-9	83009-696
1018-250-000-9	89368-958
1018-260-000-9	89079-448
1018-265-000-9	89079-450
1018-290-020-9	37001-602
1018-700-008-9	89495-434
1018-790-008-9	N/A
1018-795-008-9	89495-430
1018-800-000-9	37001-600
1018-960-008-9	37001-596
1018-965-008-9	37001-598
1015-250-000-9	10015-686
1015-260-000-9	10015-688
1015-265-000-9	10015-690
1015-800-000-9	10015-692
1015-960-008-9	10015-694
1015-965-008-9	10015-696
1019-260-000-9	89079-452
1019-265-000-9	89079-454
1019-290-020-9	37001-610
1019-800-000-9	37001-608
1019-960-008-9	37001-604
1019-965-008-9	37001-606
1032-260-000-9	89079-462
1032-290-008-9	53503-812
1032-290-020-9	53510-118
1032-295-008-9	53503-814
1032-295-020-9	N/A
1032-700-018-9	53512-315
1032-790-008-9	53509-210
1032-795-008-9	53509-212
1032-800-000-9	53512-330
1032-960-008-9	53503-769
1032-965-008-9	53503-781
1048-165-000-9	N/A
1048-800-000-9	53508-906
1048-960-008-9	53508-912
1048-965-008-9	53508-910
1044-260-000-9	N/A
1044-265-000-9	N/A
1044-800-000-9	N/A
1044-960-008-9	N/A
1044-965-008-9	N/A
1047-800-000-9	53508-914
1047-960-008-9	53503-272
1047-965-008-9	53508-904
1007-690-008-9	37001-490
1007-695-008-9	37001-492

Black Friday 2024 Promo!

For a limited time, buy select Overstock Labcon Tips for huge discounts!

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.
Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

SuperSlik® Protease Free Pipette Tips

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.
 

1161 – SuperSlik® 10 µL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 µL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 µL Extra-Long Pipette Tips
1065 - SuperSlik® 200 µL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 µL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 µL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 µL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 µL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 µL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 µL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 µL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 µL Pipette Tips for Rainin® LTS™ Pipettors
 

Packaging

Bulk Pack
Tips are supplied in one large bag inside a corrugated container.  These are not recommended for long term storage due to warping.

96 Rack
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.  The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.
 

Eclipse™ FlexTop™ Low Force Pipette Tips

Labcon Eclipse™ FlexTop™ Low Force pipette tips are designed to fit onto most popular pipettors and eject with forces shown to help reduce the risk of strain injury. By using these low force tips you don’t have to invest in special pipettors to gain all the advantages of low force pipetting. These ultimate tips feature a uniquely thin and flexible top that conforms to the pipette barrel unlike any other tips. They also include a non-beveled point that is so precise you can easily expel the tiniest amount of sample. And the top mounting is beveled to ensure that multichannel pipettes are easy to mount. FlexTop™ tip are made of clear 100% virgin polypropylene. Like all Labcon tips these tips are autoclavable along with their racks. Our FlexTop™ tips in racks are packed in our trademark Teal racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get FlexTop™ tips in resealable zip style bags, in refills for our Pagoda® system, in Eclipse® style refills, and in racks that have been sterilized using irradiation.
 

1016 - 30 µL FlexTop™ Pipette Tips with UltraFine™ Point
1017 - 200 µL FlexTop™ Pipette Tips with UltraFine™ Point
1014 - 300 µL FlexTop™ Pipette Tips with UltraFine™ Point
1012 - 200 µL Extended FlexTop™ Pipette Tips with UltraFine™ Point
1045 - 1250 µL Extended FlexTop™ Pipette Tips with UltraFine™ Point
1042 - 1250 µL Extended FlexTop™ Wide Orifice Pipette Tips
 

Packaging

Individually Wrapped
Packaged in thermal sealed polyethylene bags.  These tips have been radiation sterilized.  This package is designed to provide the highest assurance that the tips you use are pure.

Bulk Pack
Tips are supplied in one large bag inside a corrugated container.  These are not recommended for long term storage due to warping.

96 Rack
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. 

Eclipse Refills
Can be used to refill Labcon and some other brands of pipette racks.   Low carbon footprint makes them an ideal solution to waste reduction goals for your lab.  They refill racks without your having to touch the tips or racks, so you don’t need gloves.
 

Black Friday 2024 Promo!

For a limited time, buy select Overstock Labcon Tips for huge discounts!

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

ZAP™Slik Aerosol Filter Pipette Tips

ZAP™Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips. These aerosol tips provide you with complete protection from sample carry-over at the same time they reduce sample retention. Incorporating a robotically inserted 10 μm filter with a sponge-like porous pathway ZAP™Slik tips have such a small pore they even block fluids in the unlikely event that you should over-pipette. And our SuperSlik®; polypropylene increases the hydrophobicity of tips surfaces, so they have up to 10 times less fluid retention. ZAP™Slik Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination. But unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum, toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips ZAP™ tips can be autoclaved in a steam autoclave. And ZAP™ tips will not wick fluids like cellulose filled aerosol resistant tips so you don't have to worry about how you hold your pipettor. Our ZAP™ tips in sterile racks, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" tips from other pipette tip suppliers you can use ZAP™Slik tips for diagnostic and regulated procedures. And ZAP™Slik tips are RoHS compliant, unlike other low retention tips, so you don't have to worry that additives will migrate into your sample.
 

1171 - 10 µL ZAP™Slik Pipette Tips
1172 - 10 µL Extended Length with TubeGuard™ ZAP™Slik Pipette Tips
1173 - 10 µL Extra-Long ZAP™Slik Pipette Tips
1175 - 20 µL ZAP™Slik Pipette Tips
1143 - 20 µL ZAP™Slik Pipette Tips for Rainin® LTS™
1174 - 100 µL ZAP™Slik Pipette Tips
1179 - 200 µL ZAP™Slik Pipette Tips
1144 - 200 µL ZAP™Slik Pipette Tips for Rainin® LTS™
1146 - 200 µL Wide Orifice ZAP™Slik Pipette Tips
1178 - 300 µL ZAP™Slik Pipette Tips
1142 - 300 µL ZAP™Slik Pipette Tips for Rainin® LTS™
1147 - 300 µL Extended Length ZAP™Slik Pipette Tips
1177 - 1000 µL ZAP™Slik Pipette Tips
1145 - 1000 µL ZAP™Slik Pipette Tips for Rainin® LTS™
1148 - 1000 µL ZAP™Slik Wide Orifice Pipette Tips
 

Packaging

96 Rack
Offer workhorse reliability and versatility.  They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves.  Smooth rounded edges and a reinforced seal make these racks durable additions to your lab.  Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting.  A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.  The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips.  These refills use a validated sterile process and include an expiration date on every pack.  Eclipse packaging in made exclusively from recyclable and renewable materials.