Syringe Flag Vaccine Labels

• Identify the vaccine type at a quick glance with the color-coded flag and large text
• The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
• A space is provided for the time the vaccine was administered to be handwritten on the label
• Made in the USA

Material:  Mylar with Clear Laminate

Adhesive:  Permanent

Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to â40°C.  These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.

Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Label Size: 0.94" x 0.50" (24mm x 13mm)

Ideal Use: 0.5ml tubes

Color: White, Blue, Clear, Green, Orange, Red or Yellow

U of M: 1,000/roll

Please give us a call for a sample.

Labels for Moist, Frosty or Frozen Surfaces 

-"Grips" to wet, frost-covered and frozen surfaces 
-Temperature resistant to -80°C 
-Compatible with centrifuge rotors 
-Resistant to chemicals and solvents 
-Adheres to plastics, glass, metals and even paperboard boxes 
-Available in white laser sheets for use printing in any laser printer (GRLA items), white direct thermal rolls (GRRL items), or white hand writable rolls (GRDT items)

Color Coded Dual Tough-Tags will not come off in rotors, cyclers or racks.  They are resistant to extreme temperatures and the matte surface is suitable for pencil, pen or marker.

Label Size: 1.25" x 0.5625" with 0.44" spot (32mm x 14mm with 11mm spot)

Ideal Use: 1.5ml tubes

Colors: Blue, Green, Red, White and Yellow

U of M: 500 sets/roll (a set is one spot and one rectangular label)

Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.

Our label sheets are specially designed to permanently accept laser printing.

Tough-Tags are chemically inert polyester labels that strongly adhere to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconized surfaces be avoided.

Tough-Tags are pre-cut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Label Size: 1.28" x 0.50" (33mm x 13mm)

Ideal Use: 1.5mL tubes

Sheet Layout: 5 across - 17 down

Labels/Sheet: 85

Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"

U of M: 2,125/pack

Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow

Please give us a call for a sample.

How to set up your laser tags

Bake-Tags, White

Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.

TEMPERATURE RESISTANT- From -196°C to 80°C

SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.

COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.

SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.

Removable Tough-Tags are durable labels that cleanly remove from reusable surfaces.

NO RESIDUE- Easily remove from surfaces without leaving adhesive

TRACK SAMPLES- Use labels to follow samples from purification to processing

RESISTANT- Resistant to most laboratory solvents, including short-term resistance to acetone and xylene

USEFUL- Great for beakers, bottles, flasks, glass vials, tubes, tube racks, pipettes

MULTIPLE FORMATS- Available on rolls for handwriting or for direct thermal printing using the Dymo LabelWriter