SuperClear® Screw Cap Microcentrifuge Tubes

• SuperClear® tubes have integral molded in seals instead of O-rings than can dislodge.
• These tubes and caps can be reliably autoclaved for 15 minutes at 122° C.
• USP Class medical grade resins and packaging for all lab uses.

Reliable Sealing for Freezing and Storage
SuperClear® Screw Cap Microcentrifuge Tubes with molded-in elastomeric seal are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials.

Tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF.

Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding versions. 2.0ml and 1.5ml Tubes have a side writing surface and graduations on some versions.

All packaged sterile versions are sterilized with a validated and approved ISO 11137 method. Freezable to -80°C.
 

• Low binding to protect sample integrity
• -80°C to 121°C, 24,000 x g
• 100% Virgin Polypropylene
• Side Gated - No More Sore Thumbs!
• DNase/RNase-Free, non-sterile, natural

SuperClear Microcentrifuge Tubes

• Optically clear resin
• High centrifuging to 20,000 x G
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)

SuperClear tubes feature an ultra-clear polypropylene resin that gives you a clear view of the pellet as well as correct color rendition.  Designed to be sustainable, these tubes use less plastic than most other tubes and include ergonomic caps with smooth surfaces that help reduce the potential for repetitive strain injury.  The cap also includes a special 90° hinge that makes the cap easier to close while on handed pipetting.  These tubes are designed to stay closed during boiling to protect your sample.

Available in 0.5 mL, 1.7 mL, and 2.0 mL sizes that fit all stand high capacity rotors.  Tubes with snap caps have pierceable caps, a side writing surface and graduations.  Autoclavable (122°C) and freezable (-80°C).

New sterile microtubes from MIDSCI are manufactured under clean room conditions, using only BioClear co-polymer, an advanced polypropylene that maximizes clarity, centrifugal strength (tested up to 28,000xg) and the usable Temp Range (-90°C to +121°C).

The oversized tube cap (with frosted marking surface), combined with the unique ring & groove closure, enhances the security of the liquid-tight seal, while minimizing the required locking forces for a more ergonomic opening/closing of the tube caps.

All tubes are RNase, DNase and pyrogen free.

• Sterile comes standard - by electron beam radiation

• Self-Standing bag - with gusseted bottom

• Stop-Pops supplied - 10 cap locks in every bag

• Extremely low-binding polymer
• Exceptional clarity
• Certified DNAse/RNAse, nucleic acid, and pyrogen-FREE
• Boil-proof
• Autoclavable
• Larger cap for easy labeling
• Pierceable cap
• RCF: 20,000 x g
• -176°C to 121°C

PerformR® Freestanding Centrifuge Tubes
High Performance Centrifugation

• Labcon PerformR® Tubes are developed using our own in-house laboratory and tested in real labs in basic procedures.
• Only 100% Medical Grade polypropylene resins are used in PerformR® Tubes. No recycled plastics or commodity grade resins.
• PerformR® Centrifuge Tubes are autoclavable with a standard 122°C plasticware process for 15 minutes.
• PerformR® tubes are printed using UV fixed inks that won't rub off like screen printed tubes from other suppliers. Graduations are tested for accuracy during every production lot.
• Labcon is the only major supplier in our industry to be registered by the U.S. Food and Drug Administration (FDA)
• Spins to 12,500 RCF

These freestanding 50mL centrifuge tubes are available for use in those applications where a rack is not available. They include a large white solvent resistant writing area and black graduations. Available with either a flat cap or a plug style cap. Freezable (-80°C) and autoclavable (122°C), if caps are loosely attached to the tubes.

PerformR® Freestanding Centrifuge Tubes

• Flat screw caps
• Molded graduations
• IATA 95kPa certified
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Polypropylene USP Class VI resin
• Centrifuging to 10,000 x G
• Tubes and caps are freezable to -80°C
• Tubes are autoclavable

30mL PP Centrifuge Tubes

25 mL Centrifuge Tubes

• Fits most 50 mL rotors - Rim eliminates need for adapter
• Printed graduations - From 5mL to 2mL
• Compact low-profile design - Minimizes shipping, storage, and waste
• Gamma sterilized - RNase, DNase, & Pyrogen free

MTC Bio's 25 mL tube is the newest addition to our family of screw cap conical tubes. Closing the obvious gap between 15 mL and 50 mL tubes, they are ideal for any application that requires more than 15 mL and less than 50 mL, including midipreps, general sample prep, centrifugation, mixing and storage.

Aside from the reduction in freight costs, storage space and plastic waste, the 33% reduced height and large diameter design (which is identical to 50 mL tubes) allows for faster re-suspension of pellets and 100% recovery of small samples. Concerns about cross-contamination (a frequent result of accidental contact between the pipette and the inner wall of a 15 mL tube) are eliminated by the hood-friendly, low profile, wide diameter format.

Additionally, the tubes have a 360° support rim, just below the cap. Similar to 1.5 mL tubes, this rim allows the tube to fit into most racks, blocks, shields and rotors without requiring adapters. Made of high clarity polypropylene, MTC Bio 25mL conical tubes can withstand up to 17,000 xg maximum RCF* and are supplied sterile, certified RNase, DNase and pyrogen free and packed in racks or bags of 25 tubes with screw caps attached.

*Refers to liquids with a specific gravity of 1.0, using appropriate rotors, cushions and adapters.

Specifications

*without cap

15 mL PerformR® Polystyrene Centrifuge Tubes

• Centrifuging to 3,000 x G
• Attached flat screw caps
• Molded graduations
• Validated Sterilization (ISO 11137) for use in Research and Medical lab
• Not autoclavable or freezable

Polystyrene tubes are made of crystal clear resin and have bold etched graduations.  They can be used for some culture applications that require a glass clear material.  Cap includes a polyethylene liner.

Caps have a three-ply co-extruded liner consisting of a foamed White Low-Density Polyethylene (LDPE) core sandwhiched between two solid layers of Low-Density Polyethylene which contains High-Density Polyethylene (HDPE) for improved stiffness.  Not autoclavable or freezable. 

All sterile package versions are sterilized with a validated and approved ISO 11137 method. Racked tubes are packaged in a sustainable cardboard rack that is easy to recycle.

Labcon 1.5 mL ViewPoint Microcentrifuge Thermochromic Tubes

• ViewPoint™ Thermochromic
• Real-time temperature signaling
• Reversibly transition from clear to light blue at 4°C with full dark blue transition at 0°C
• 1.5 mL
• With flat easy open attached snap caps; side graduations, and frosted writing surface
• Protease, Human DNA, ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Sperm Motility Assay (SMA) Mouse Embryo Assay (MEA) validated safe for cell culture
• Polypropylene USP Class VI resin
• Ultra high centrifuging to 40,000 x G
• Freezable to -80°C
• Made in USA
• Greener Choice Claims

• Renewable Energy
• Certifications and Seals of Approval
• Free-of a substance that causes environmental harm
• Non-Toxic
• Recyclable