Round Bottom Snap Cap Tubes

Stop fumbling with caps for your tubes!

MTC Bio’s new round bottom snap cap culture/centrifuge tubes adopt the conveniences of popular 1.5mL microcentrifuge tubes in higher capacities of 5 mL, 7 mL, and 10 mL. Prevent a common source of cross-contamination in the lab by completely eliminating the threat of mismatched caps.

These durable, polypropylene tubes are supplied sterile and are autoclavable. All tubes feature molded graduations and the 5 and 7mL tubes have frosted marking areas. Tubes are packed in easy-to-open sterile bags of 100.

• Microtube convenience in larger capacities
• Attached caps seal at the rim with a “click”
• Sterile, easy-open bags of 100 tubes
• Molded graduations and frosted marking area

Specifications

Screw Caps with Elastomeric Seal, for SuperClear® Microcentrifuge Tubes

• With integral elastomeric seal
• Cap includes soft griping surface
• Endotoxin Free (non-pyrogenic)
• Autoclavable
• Caps are in resealable Bags

250 mL Centrifuge Tubes

• Perfect for Cell harvesting
• Molded graduations from 0.5 to 250 mL
• Sterile, RNase, DNase & Pyrogen free
• Leak-proof screw-cap

250 mL screw-cap polypropylene tubes are manufactured for temperature and chemical resistance. These tubes are intended for large volume centrifugation and are widely used in cell harvesting/purification and drug discovery applications. Tubes can withstand up to 6,000xg maximum RCF*. They are supplied in sterile, RNase, DNase, and pyrogen-free packs of 5 tubes, 70 tubes per case.

UVsafe™ Amber 15 mL and 50 mL Centrifuge Tubes for Light-Sensitive Samples

• Certified to block 100% UV light
• Completely opaque, protecting even the most light sensitive compounds
• Will still pass visible light so you can see your sample volume
• Large, white solvent-resistant writing panel
• Caps & tubes feature recycling codes
• Plug caps are autoclavable when attached to UVsafe tubes
• Accurate, easy-to-read printed graduations
• Max RCF printed on the tube
• Freezeable (-80°C) and autoclavable 122°C), as long as caps are loosely attached to the tubes

PLUG CAPS

• Secure seal for extended storage
• Made from high-density polyethylene
• Autoclavable (122°C), as long as caps are loosely attached to the tubes

We Have Improved The Best Tube On The Market!

• -80°C to 121°C
• 24,000 x g
• 100% Virgin Polypropylene
• Small Cap
• Side Gated - No More Sore Thumbs!
• Redesigned Lid, Easier To Open
• 500 Per Case!
• DNase & RNase Free!
• Research grade tubes you can boil and use with confidence!
• Colors also available: Red, Yellow, Blue, Green, Amber, Purple, or Assorted. MIX OR MATCH!

• High centrifuging to 20,000 x G
• Freezable (-80°C)
• Autoclavable
• Capacity: 1.5 mL
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Attached flat snap caps

SuperSlik® low retention microcentrifuge tubes have a low protein binding surface that minimizes sample loss during sample manipulation.  Ideal for applications such as mass spectrometry (ms), immunoprecipitation (IP), co-immunoprecipitation (Co-IP).  Leakproof snap caps may be penetrated by a syringe and will no pop open during autoclaving.  Compatible with many thermal cyclers and able to tolerate centrifuge speeds up to 20,000 RCF.
 

LabCon SuperSpin™ Microcentrifuge Tubes

• Ultra-high centrifuging up to 40,000 x G*
• Optically clear resin
• Resin will not interfere with DNA or PCR
• For Phenol/Chloroform vortexing
• Reduced Thumb Force
• Autoclavable (122°C) and freezable (-80°C)
• Packaged in resealable bags
• Tubes have flat pierceable caps and a side writing surface
• Graduated

SuperSpin® microcentrifuge tubes were designed with the ability to extract DNA from samples and then amplify that DNA with reliable results in mind.  They can be trusted to spin at high rates and can be opened and closed easily many times to add or remove agents.  The interior surfaces are ultra-smooth with low retention.  The tubes are clear enough to be use in spectrophotometers and have no extractables at the wavelength ranges you use to detect DNA. SuperSpin® microcentrifuge tubes are more than twice as effective at transmitting light than most brands of micro centrifuge tubes.

*Maximum G-force can be affected by organic solvents, multiple spin cycles, or low temperature storage.

• Spin up to 70,000 x g
• Disposable - avoid potential contamination from reusing tubes
• Capped tubes have frosted surface for easy labeling
• Sterile

1/2'' Label Tape with 3" Core

Color coding tape is easy to write on and removes easily without leaving any sticky residue behind.

• The tape is strong, durable, oil-resistant, waterproof, and acid resistant.
• It can withstand temperatures from -23° to +121° Celsius (10° to +250° Fahrenheit).
• Colored Tape can be written on with a pen, pencil, or permanent marker.
• The tape will stick to most surfaces including glass, plastic, and metal.

3/4'' Label Tape with 3" Core

Color coding tape is easy to write on and removes easily without leaving any sticky residue behind.

• The tape is strong, durable, oil-resistant, waterproof, and acid resistant.
• It can withstand temperatures from -23° to +121° Celsius (10° to +250° Fahrenheit).
• Colored Tape can be written on with a pen, pencil, or permanent marker.
• The tape will stick to most surfaces including glass, plastic, and metal.

1'' Label Tape with 3" Core

Color coding tape is easy to write on and removes easily without leaving any sticky residue behind.

• The tape is strong, durable, oil-resistant, waterproof, and acid resistant.
• It can withstand temperatures from -23° to +121° Celsius (10° to +250° Fahrenheit).
• Colored Tape can be written on with a pen, pencil, or permanent marker.
• The tape will stick to most surfaces including glass, plastic, and metal.