S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Test Tubes and Racks
From test tubes and racks to the labels and boxes you’ll use them with. MIDSCI has got your needs covered.
MIDSCI has a wide assortment of test tubes, including top-notch centrifuge tubes your research depends on. We carry everything from sterile centrifuge tubes that we promise won’t buckle during spins to specialty centrifuge tubes that are completely blacked out to preserve your light sensitive compounds.
We also have freezer racks and autoclavable racks, stackable storage boxes and freezer boxes, general storage containers and cryogenic storage refrigerators and tanks.
And let’s not forget the labels! Wash-off labels, removable labels, and labels that will never come off (if you need that).
There are so many other quality choices and options for all of these products.
MIDSCI™ Brand is being discontinued.Please visit PR1MA™ - CryoTag Sheets for Microplates for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
Removable Tough-Tags are durable labels that cleanly remove from reusable surfaces.
NO RESIDUE- Easily remove from surfaces without leaving adhesive
TRACK SAMPLES- Use labels to follow samples from purification to processing
RESISTANT- Resistant to most laboratory solvents, including short-term resistance to acetone and xylene
USEFUL- Great for beakers, bottles, flasks, glass vials, tubes, tube racks, pipettes
MULTIPLE FORMATS- Available on rolls for handwriting or for direct thermal printing using the Dymo LabelWriter
Tough-Tags® are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and other microscope slides. They are temperature resistant from 121°C to 40°C and withstand autoclaving, boiling water baths, freezer temperatures, organic solvents and caustic agents. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.
Sheets of microtube labels that can be printed directly from a laser printer, eliminating repetitive writing and saving your valuable time.
-
Resists Solvents & Caustic Reagents
-
Ideally Sized
-
Centrifuge Compatible
-
Scuff & Smear Resistant
-
Multiple Uses
MIDSCI™ Brand is being discontinued.
Products are available for purchase while in stock.
Please visit Sheets of Labels for our NEW PR1MA™ Label options!
MIDSCI™ Brand is being discontinued.
Products are available for purchase while in stock.
Please visit Sheets of Labels for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
PRINTING FLEXIBILITY - Print as little as one label at a time, eliminating label waste and saving time and money.
BARCODING - Print popular barcode formats for fast and easy sample identification.
VERSATILE - Works with most thermal transfer printers.
HIGH RESOLUTION - Print crisp, clear, professional quality labels.
SUPERIOR - Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance.
TOUGH - Resists degradation from scuffing, chemicals, moisture and wide temperature fluctuations.
SPECIALLY DESIGNED - Coated for use with a resin ribbon that provides the best performance under extreme conditions.
Our patented Cryogenic labels (Cryo-Babies are the small sizes and Cryo-Tags are the larger), are flexible polyolefin labels that withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic adhesive that will adhere to all plastics, glass and metal. Cryo-Babies and Cryo-Tags will withstand boiling water baths at 100°C and dry heat up to 150°C without cracking, peeling or degrading.
Cryo-Babies and Cryo-Tags resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They will resist water soaking for at least 24 hours at room temperature and water vapor (100% relative humidity) at 35°C for at least 24 hours.
Label Size: 1.28" x 0.50" with 0.375" spot (33mm x 13mm with 9.5mm spot)
Ideal Use: 1.5ml tubes
Sheet Layout: 4 sets across - 17 sets down
Labels/Sheet: 68 sets
Color: White
U of M: 1,360/pack
Watch a video on: How to set up your laser tags
Tough-Tags® are chemically inert labels that strongly adhere to microtubes, test tubes, storage boxes and other microscope slides. They are temperature resistant from 121°C to 40°C and withstand autoclaving, boiling water baths, freezer temperatures, organic solvents and caustic agents. For best adhesion it is recommended that siliconized surfaces be avoided.
Tough-Tags® are perfect for accurately identifying important samples stored in tubes, microplates or boxes that will be autoclaved or stored in moderate freezer temperatures.
Biohazard Tough Spots
Specialty Tough Spots on a Roll are now available for specialty applications, such as identifying hazardous or radioactive samples.
TEMPERATURE RESISTANT- From -196°C to 80°C
SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.
COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.
MIDSCI™ Brand is being discontinued.Please visit PR1MA™ - CryoTag Sheets for General Use for our NEW PR1MA™ Label options!
MIDSCI™ Cryogenic Labels - Sheets
Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.
We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.
Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron.
The ice-free FreezeBox™ is a new type of energy-saving environmentally friendly, safe, additive-free freezer box. The ice core aluminum alloy shell with high thermal conductivity of the alloy module ensures that the samples can be quickly cooled. The temperature difference between the sample holes is less than 0.1°C, which maintains a uniform temperature throughout the samples. Because the FreezeBox™ is ice-free, lightweight, and easy to carry it is ideal for collection of biological samples, or even to preserve unstable nucleic acid samples. Its compact design and ice-free technology allow for convenient use in a tissue culture incubator, bio-safety cabinet or any other application with limited space. The FreezeBox™ can be used with different ice cores, and a variety of thermal test tube modules allowing for usage with different samples and temperatures. Features:
Usage:
TECHNICAL PARAMETERS:
ACCESSORIES:
TUBE MODULE
|
BetterBox™ Microtube Storage Boxes
- Organized and secure storage
- 81-place for 1.5 mL microtubes
- Black, alphanumeric identification
- Removeable insert - accepts crushed ice
MTC Bio's BetterBox™ is an all new autoclavable polypropylene storage box, exclusively designed to hold 81 x 1.5 mL or 2.0 mL microtubes neatly and securely in nine rows of nine tubes (snap cap or screw cap tubes fit equally well). The lid cannot become separated or lost thanks to the sturdy hinge and locking clasp. A frosted marking spot is molded into the front edge and the top surface. Available in a rainbow pack of five colors with clear lids and bases, the actual tube rack (colored middle layer) can be snapped out, allowing the base to be easily filled with crushed ice or liquid. The BetterBox™ is made of autoclavable virgin polypropylene and is freezable to -80° C. The special corner feet are designed to mate with the four grooves in the top of the lid making them interlock and exceptionally easy to stack and transport.
Dimensions: 150 x 160 x 54mm (W x L x H).
Web Content Viewer
Actions