View:

PR1MA™ Taq

  • Ideal for routine PCR applications as well as genotyping, colony PCR, and fast PCR
  • Improved template affinity and solubility for higher enzyme activity and greater yields
  • Proprietary buffer optimized for a variety of assay conditions
  • Conveniently supplied as a 2X Master Mix or in a 2-tube format of polymerase and separate 5X buffer

 

PR1MA™ Taq provides superior results for routine applications. Modified to improve DNA-binding, this polymerase offers higher solubility and greater template affinity, resulting in consistently superior performance. PR1MA™ Taq Polymerase exhibits a 5' to 3' nuclease activity, but no 3' to 5' (proofreading) activity and works well with a wide range of DNA templates including GC-rich sequences.

 

The polymerase is supplied with a 5X buffer containing MgCl2 and a proprietary mix of enhancers (dNTP's not included). For convenience, PR1MA Taq is also available in a ready-to-use 2X Master Mix - just add primers and template DNA. Our "Red Dye" Master Mix incorporates a red-loading dye that allows amplified samples to be loaded directly on an agarose gel.  The red color aids in visualization during pipetting, and higher density of the buffer ensures that the samples will drop into the gel wells.

 

 

Benchmark Black Friday 2024 Promo!
For a limited time, buy ONE PR1MA SmartGlow Pre-stain (BE4500-PS) or
ONE PR1MA SmartGlow Loading Dye with Stain (BE4500-LD) and get ONE FREE! MIX OR MATCH!


See flyer for more details.

 

Promo is valid from 11/04/24 - 12/06/24

All promotions are valid while supplies last. Prices are subject to change without notice.

Not to be combined with any offers or discounts. No institutional pricing. All terms apply.

Use item number +"-VF" or promo code TURKEY24


PR1MA™ SmartGlow™ DNA Safe Stain

  • Replaces hazardous Ethidium Bromide (EtBr)
  • Better sensitivity than EtBr
  • Detect as little as 0.1ng of DNA
  • Two types available
  • PS Pre Stain
  • LD Loading Dye
  • Excitation by UV light or blue light
  • Compatible with Accuris SmartBlue Transilluminator
  • Ships at ambient temperature (stored at 4°C)


PR1MA™ SmartStain™ PS (Pre-Stain) can be used as a direct replacement for Ethidium Bromide in agarose and polyacrylamide gel electrophoresis. The stain emits green fluorescence when bound to dsDNA or ssDNA and emits red fluorescence when bound to RNA. PR1MA™ SmartStain™ PS exhibits excitation peaks at 290 nm and 490 nm, allowing it to be used with UV and blue light.

Protocol:

  • Prepare 100 mL of agarose or polyacrylamide solution.
  • Add 5 µL of PR1MA™ SmartStain™ to the gel solution before pouring gels.
  • For enhanced results, add PR1MA™ SmartStain™ PS to the running buffer at a ratio of 5 µL per 100 mL. Adding PR1MA™ SmartStain™ PS to the running buffer will result in increased sensitivity and better detection of small quantities of nucleic acid.
  • After electrophoresis is complete, view the gel using a UV or blue light illuminator   


 

 
PR1MA™ Taq Plus

  • Higher fidelity for long PCR amplicons, up to 35 kb
  • Ideal for problematic templates
  • Better sensitivity and higher activity for low-copy and long PCR
  • Enzyme of choice for TA cloning


PR1MA™ Taq Plus, an optimized blend of our Hot Start Taq and a proofreading polymerase, provides 5X better fidelity than wild-type Taq and increased enzyme activity. It is the perfect choice for GC and AT rich templates, low copy number, and long PCR.

The 3' -5' exonuclease activity of the proofreading enzyme produces fragments suitable for TA cloning. PR1MA Taq Plus is provided with a 5X buffer with dNTPs or in a convenient one-tube 2X Master Mix.


PR1MA™ Taq Start Taq DNA Polymerase 

ItemDescriptionVolume
PR1000-TP-SPR1MA™ Taq Start Taq DNA Polymerase50 Units (Sample)
PR1000-TP-250PR1MA™ Taq Start Taq DNA Polymerase250 Units (5 U/p1)
PR1000-TP-500PR1MA™ Taq Start Taq DNA Polymerase1,000 Units (5 U/p1)

 

 

 

PR1MA™ Taq Plus Master Mix, 2X Concentration

  

ItemDescriptionVolume
PR1001-TP-SPR1MA™ Taq Plus Master Mix, 2X Concentration20 Reactions (Sample)
PR1001-TP-200PR1MA™ Taq Plus Master Mix, 2X Concentration200 x 50 µL Reactions
PR1001-TP-1000PR1MA™ Taq Plus Master Mix, 2X Concentration1,000 x 50 µL Reactions



 

 
PR1MA™ Hot Start Taq

  • Exceptional sensitivity for low-copy PCR
  • Ideal for multiplex PCR and amplification of GC-rich DNA
  • Same enhanced features as PR1MA Taq Polymerase
  • Buffer optimized for fast cycling and reproducibility

 

Engineered for controlled polymerase activity, PR1MA Hot Start Taq is bound with a monoclonal antibody that blocks enzyme activity. This allows reactions to be set up at room temperature without the risk of non-specific amplification.

 

When samples are ready, the reaction mixture is heated to 95°C to denature the antibody and initiate the reaction. Similar to the standard PR1MA Taq, Hot Start Taq is provided with a 5X buffer, or in a ready-to-use 2X Master Mix. The Master Mix can be ordered with or without an incorporated red gel loading dye.  The Red Dye Master Mix incorporates a red-loading dye that allows amplified samples to be loaded directly on an agarose gel.  The red color aids in visualization during pipetting, and higher density of the buffer ensures that the samples will drop into the gel wells.

 

 

 
PR1MA™ High Fidelity Polymerase

  • 50X higher fidelity than Taq DNA polymerase
  • Works with crude DNA sample
  • Ideal for cloning, mutagenesis and microarrays
  • Produces blunt end products, to clone directly into blunt end vectors
  • Optimized buffer system with unique PCR enhancers

 

For applications requiring highly accurate amplification, choose PR1MA™ High Fidelity DNA polymerase. Modified for better solubility and higher activity across a broad range of ionic conditions, this polymerase will amplify a wide range of targets, including those that are GC or AT rich as well as crude samples.

 

A 3'-5' proofreading exonuclease activity and an error rate of 4.55×10-7 makes PR1MA™ High Fidelity DNA Polymerase the perfect partner for cloning applications. The supplied 5X buffer with dNTPs is optimized for compatibility with a variety of targets.

 

Specifications

Item DescriptionVolume
PR1000-HF-SPR1MA™ High Fidelity DNA Polymerase20 Units (Sample)
PR1000-HF-200PR1MA™ High Fidelity DNA Polymerase200 Units (2 U/p1)
PR1000-HF-500PR1MA™ High Fidelity DNA Polymerase500 Units (2 U/p1)
PR1000-HF-1000PR1MA™ High Fidelity DNA Polymerase1,000 Units (2 U/p1)


 

  

 
PR1MA™ High Fidelity Hot Start Master Mix


  • Leaves an A-overhang for TA cloning
  • Ideal for difficult, high GC content sequences
  • 10x fidelity of native Taq
  • Ideal for long PCR, up to 10kb targets

 

PR1MA™ High Fidelity Hot Start Mix is a hot start 2x formulation which provides excellent sensitivity in low-copy number assays with 10x higher fidelity than Taq polymerase. The 2x master mix contains proprietary enhancers, an antibody-mediated hot-start mechanism, and a proofreading component for trouble-free PCR reaction assembly and performance.

 

The pre-optimized Hot Start Master Mix is supplied in a single tube, reducing the number of pipetting steps while improving throughput and reproducibility. The highly efficient buffer formulation and hot-start blend provide the ideal conditions for high-performance PCR and inactivity at room temperature thereby eliminating non-specific amplification.

 

PR1MA High Fidelity Master Mix

  • Leaves a blunt end
  • Rapid extension: up to 1 kb per 15 seconds
  • 100x fidelity of native Taq
  • Ideal for shorter, less complex targets

A 2x formulation which provides extreme sensitivity in low copy number assays with 100x the fidelity of native Taq, PR1MA High Fidelity Master Mix is perfect for shorter, less complex targets. The 2x master-mix contains proprietary enhancers and a proof-reading component for trouble-free PCR reaction assembly and performance. High Fidelity Master Mix delivers a unique balance of PCR sensitivity, high fidelity, versatility, and tolerance to inhibitors.

The pre-optimized Master Mix is supplied in a single tube, reducing the number of pipetting steps while improving throughput and reproducibility. The highly efficient buffer formulation provides the ideal conditions for high-performance PCR.

PR1MA™ Mammalian Genotyping Kit

  • DNA extraction and amplification in 1 hour
  • Proprietary lysis buffer optimized for ear punches, tail snips and other mammalian tissues
  • Single tube - no organic solvents or clean up procedures
  • Enhanced PR1MA Hot Start Polymerase included

Traditionally, mammalian genotyping protocols have involved Proteinase K digestion, neutralization, organic extraction and lots of hands on time to get PCR-ready DNA.

The PR1MA Mammalian Genotyping Kit is quick and easy to use - add sample to the proprietary lysis buffer and incubate for 5-10 minutes, then add the deactivation buffer and incubate for 10 minutes. The crude lysate can then be amplified using fast PCR PR1MA Hot Start Taq Master Mix with red loading dye (included). The kit contains everything needed - just add sample and primers.

 
 
PR1MA 1 Hour Mammalian Genotyping Kit 

Item

Description

Volume

PR1300-MG-S

PR1MA 1 Hour Mammalian Genotyping Kit

8 Reactions (Sample)

PR1300-MG-80

PR1MA 1 Hour Mammalian Genotyping Kit

80 Reactions

PR1300-MG-400

PR1MA 1 Hour Mammalian Genotyping Kit

400 Reactions

PR1300-MG-800

PR1MA 1 Hour Mammalian Genotyping Kit

800 Reactions


 
 
 PR1MA Genotyping Hot Start Master Mix, 2X Concentration with Red Dye

Item

Description

Volume

PR1301-HSR-400

PR1MA Genotyping Hot Start Master Mix, 2X Conc., Red Dye

400 Reactions

 
 

Accuris Fast Extraction PCR Kit

 

The Accuris Fast Extraction PCR Kit features an exclusive single-tube solution that extracts genomic DNA in just 8 minutes. This is swiftly followed by PCR amplification utilizing our High Fidelity Hot Start Red Dye Master Mix, designed for superior endpoint PCR performance. High Fidelity Hot Start Red Dye Master Mix is a 2X formula that incorporates a non-reactive red dye, enabling direct gel loading.

 

This kit offers versatility to suit different workflows: the PCR-prepared genomic DNA can be directly used in endpoint PCR or can be applied in real-time PCR using either SYBR Green or TaqMan Probe chemistries.

  • Offers exceptional versatility and can be used to extract and amplify DNA from a wide range of sample types
  • Compatible with animal tissue, plant, saliva, & bacterial samples
  • Extraction & Amplification in less than 60 minutes
  • Includes High Fidelity Hot Start Red Dye Master Mix to prevent the risk of nonspecific amplification & to visualize bands easily
  • Process extracted sample via PCR with included mastermix
  • Alternatively, amplify via qPCR (qPCR mastermix not included)

 

Each 100 reaction kit includes:

1 tube of High Fidelity Hot Start Red Dye Master Mix (1.25 mL)

1 tube of Fast Extraction Lysis Solution (1.25 mL)

 

Applications: Extraction & Amplification of Tissue, Plant, Saliva, & Bacteria   

PR1MA™ Cod Uracil-DNA Glycosylase

 

Is amplification carry-over contamination ruining your assay sensitivity?

 

PR1MA™ Cod Uracil-DNA Glycosylase (cUNG) is a recombinant, thermolabile enzyme that removes uracil from DNA. It is ideal for preventing carry over contamination during RNA or DNA amplification reactions that substitute dUTP for dTTP. cUNG is the only commercially available UNG that is completely and irreversibly inactivated by moderate heat treatment, unlike bacterial versions of the enzyme. Cod UNG treatment in combination with targeted pre-amplification using dUTP provides a simple and efficient solution to eliminate carry-over contamination and the generation of false positives and inaccurate quantification.

  • Optimal temperature: 37 °C
  • Heat inactivation: 55 °C for 5 minutes
  • Enables contamination control in PCR and other amplification methods
  • Does not degrade product after inactivation, enabling downstream use of the amplicon
  • Storage temperature: -20 °C

Buffer composition

  • 50% glycerol
  • 50 mM Tris-HCl
  • 50 mM KCl
  • 1 mM DTT
  • 0.1  mM EDTA
  • 0.1% Tween-20
  • pH = 7.5

*These products are intended for research use only, not for therapeutic or diagnostic purposes in humans or animals. The safety and efficacy of these products in diagnostic or other clinical uses has not been established.   

1mL, 1 vial of 1000ul

Affordable price & shipped at room temperature.

 

A premixed, ready-to-use solution for efficient amplification of DNA templates by PCR.

  • 2X Eco-Taq MasterMix contains Taq DNA Polymerase, dNTPs, Mg2+ and Reaction Buffer at optimal concentrations for efficient amplification of DNA templates by PCR, as well as an inert loading dye.
  • This pre-mixed formulation saves time and reduces contamination due to the fewer pipetting steps required for PCR set up. To prepare the final PCR, only primers and template DNA need to be added.
  • The mix retains all features of Taq DNA Polymerase and can amplify DNA targets up to 5 kb (simple template).
  • The elongation velocity is 0.9~1.2kb/min (70~75°C).
  • It has 5' to 3' polymerase activity but lacks 3' to 5' exonuclease activity which results in a 3'-dA overhang PCR product.

 

Features:

  • Convenient: Just add primers and template DNA
  • High yields of PCR products with minimal optimization.
  • High efficiency: saves your time by simplifying the process
  • Reproducible: lower contamination risk and pipetting error.

    Applications:

  • High-throughput PCR.
  • Routine PCR with high reproducibility
  • Generation of PCR products for TA cloning

    Contents:
    2X Taq Mix 1ml

    Store at -20°C
    For research use only

Item#:
ECO-TAQ1
Your Price:
35.00
Each

PR1MA™ Tn5 2.0 Transposase

 

PR1MA™ Tn5 2.0 Transposase (Tnp) is a hyperactive retroviral integrase engineered for improved activity, speed, and robustness that is used to construct random next-generation sequencing libraries and to study chromatin structure using targeted ATAC-seq. PR1MA™ Tn5 2.0 can be used to randomly fragment any target and insert unique oligonucleotide adapters in a single reaction which reduces the time and sample requirements relative to traditional next-gen sequencing library construction. 

  • Optimal temperature: 55 °C
  • Inactivation: 40X Stop solution included (2% SDS)
  • Storage temperature: -20 °C
  • 10X Tn5 reaction buffer included

Buffer composition

  • 100 mM Tris-HCl
  • 100 mM MgCl2
  • pH = 7.5

*These products are intended for research use only, not for diagnostic use. The safety and efficacy of these products in diagnostic or other clinical uses has not been established.   
 

View: