PurePlus® Deep Well Plates

Labcon’s PurePlus® Deep Well Plates are rigorously tested to ensure they are free of RNase, DNase, ATP, and endotoxins. With our in-house microbiology lab, consistency is a top priority.

Available in sterile and non-sterile formats, these plates fit most popular instruments and can be sealed with sealing films or reusable silicone mats. Barcoding is available for both 1.2 mL and 2.2 mL plates by special order.

Ultra Clean & Ultra Clear 

PurePlus® plates feature molded-in orientation and permanent printed locating grids for ease of use. They are available in multiple formats: 96 well square hole with conical or flat bottom, 96 well round hole with round bottom, and 384 well square hole.

With volumes ranging from 0.2 mL to 2.5 mL, our plates are offered in non-sterile and validated medical-grade sterile versions, sterilized to an SAL of 10^-6 in compliance with ISO 11137.

The 1.2 mL and 2.2 mL volumes include three-sided alpha-numeric labeling grids, and their smooth interior surfaces ensure efficient pipetting. Designed for manual or robotic handling, these plates are SBS formatted for compatibility with automated systems.

Additional Features

Made from 100% virgin polypropylene, PurePlus® plates are autoclavable and freezable. Unlike "pre-sterile" products from other manufacturers, our sterile plates are fully validated for diagnostic and regulated procedures.

Specifications

ILP 240 uL, Square Well, V-Bottom MicroPlates – 384

Our 384-well plates offer quality, performance, and confidence. Ultra-flat surfaces, sturdy design, and rigidity optimize our 384-well plates for consistent handling with a variety of automated platforms for high-throughput workflows. Plates are standardized to comply with ANSI/SLAS 2004-1, guaranteeing proper fit.

These plates offer secure storage for assays, compound libraries, or storing samples for any duration. Inert medical-grade virgin polypropylene resins are ideally suited for stable, long-term high-density sample storage at -80 °C. The square well V bottom design helps maximize sample recovery. Raised rims on each well help protect from cross-contamination and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films.

Made from Virgin Polypropylene (no mold release agents or regrind); RNase, DNase, DNA, and Pyrogen Free Certification.
 

ILP 120 uL, Square Well, V-Bottom MicroPlates - 384

Our 384-well plates offer quality, performance, and confidence. Ultra-flat surfaces, sturdy design, and rigidity optimize our 384-well plates for consistent handling with a variety of automated platforms for high-throughput workflows. Plates are standardized to comply with ANSI/SBS 6-2012, guaranteeing proper fit.

These plates offer secure storage for assays, compound libraries, or storing samples for any duration. Inert medical-grade virgin polypropylene resins are ideally suited for stable, long-term high-density sample storage at -80 °C. The square well V bottom design helps maximize sample recovery. Raised rims on each well help protect from cross-contamination and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films.

Made from Virgin Polypropylene (no mold release agents or regrind); RNase, DNase, DNA, and Pyrogen Free Certification.

Specifications
 

Product Type	384 Square Well Plates
Well Shape Bottom	Pyramid – V
Material	Natural Polypropylene
Alphanumeric	Molded in
Compliance	ANSI/SBS 6-2012
Surface Treatment	None
Certified	DNase-/RNase-/Pyrogen-Free
Max Volume	130 uL
Working Volume	120 uL
Volume w/ Mat Lid	30 uL
Autoclavable	121ºC (249.8ºF) at 15 psi, 15 min.
Max RCF	4000
Max Temp.	120ºC (248ºF)
Min Temp.	-80ºC (-112ºF)

 

ILP Round Well, V-Bottom MicroPlates - 96 

Huge round top wells (with conical V-bottom) provide easier access and up to 480 µL per well of working volume in this short (14.4mm high) micro-plate.

Manufactured from chemically resistant and inert virgin polypropylene, this plate is optimized for sample collection; combinatorial chemistry; library applications, bacterial and yeast growth, storage, and sample recovery.  

The V-bottom design helps to concentrate reagents and samples, by minimizing the amount of both needed. It also improves sample recovery, while larger diameter wells improve sample access and overall volume.

The sturdy design and ANSI/SLAS 2004 compliant footprint (SBS) allow for automated usage with grippers, stackers, and heater/cooler blocks.

Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films, help prevent cross-contamination, and reduce sample loss in storage.

Lot to lot tested and certified to be free of RNase, DNase, and Pyrogen contamination.

Specifications

ILP Round Well, U-Bottom Glass Coated MicroPlates – 96

• Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.
• This SiO2 coating helps to:
• Reduced binding
• Increase chemical resistance
• Protect the same from any potential compounds leached from the plastic.

300 uL plate design

• Assists in mixing and provides low residual volumes after pipetting (<0.1 l)
• Designed for automated systems
• Raised rims on each well help protect from cross-contamination and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films
• Made from Virgin Polypropylene; no mold release agents or regrind
• RNase, DNase, DNA, and Pyrogen Free Certification

500 uL plate design

• Holds up to 500 uL per well of working volume in a 14.4 mm high micro-plate
• The unique open-bottom design maximizes volume, while larger diameter wells improve sample access and mixing
• ANSI/SLAS 1-2004 compliant footprint (SBS) allows for automated usage with grippers, stackers, and heater/cooler blocks.
• Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films, help prevent cross-contamination, and reduce sample loss in storage
• Manufactured from chemically resistant and inert virgin polypropylene
• Lot to lot tested and certified to be free of RNase, DNase, and Pyrogen contamination

ILP Round Well, V-Bottom Glass Coated MicroPlates – 96

Glass coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.

• This SiO2 coating helps to
• Reduced binding
• Increase chemical resistance
• Protect the same from any potential compounds leached from the plastic. 

Plate design

The 96 round well V-bottom design minimizes reagent usage and provides the lowest residual volumes after pipetting (<0.1 l); designed for colorimetric assays and compound storage/ libraries, especially with automated systems.

• Consistent automated handling – ultra-flat surfaces, sidewall gripper lugs, and rigidity
• Durable – withstands repeated freeze/thaw cycles down to -20ºC without adversely affecting dimensional integrity
• Raised rims on each well help protect from cross contamination and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
• Manufactured of exceptionally clear and inert virgin polypropylene (no mold release agents or regrind)
• Certified RNase, DNase, DNA, and Pyrogen Free.

Specifications
 

Number of Wells	96
Number of Plugs	96
Plug Shape	Conical – V
Well Shape Top	Round
Well Shape Bottom	Conical – V
Material	USP Class VI Polypropylene
Adhesive Material	SiO2; 0.0079mil
Color	Natural
Alphanumeric	Molded in
Compliance	ANSI/SBS 6-2012
Surface Treatment	SiO2
Certified	DNase-/RNase-/Pyrogen-Free
Overall Height	14.60 mm
Well Depth	10.90 mm
Overall Length	127.00 mm
Adhesive Thickness	SiO2; 0.0079 Mil
Width	85.00 mm
Top Width	81.10 mm
Well Diameter Bottom	6.58 mm
Well Diameter Top	6.96 mm
Top Length	122.90 mm
Well Bottom To Deck	2.85 mm
Max Volume	360 uL
Working Volume	300 uL
Volume With Mat Lid	235 uL
Plug Depth	10.90 mm
Plug Diameter	6.58 mm
Autoclavable	121ºC (249.8ºF) at 15 psi, 15 min.
Max RCF	4,000 RCF
Max Temp.	120ºC (248ºF)
Min Temp.	-80ºC (-112ºF)

 

ILP Round Well, U-Bottom MicroPlates – 96

300 uL MicroPlates

The 300 uL plate design assists in mixing and provides low residual volumes after pipetting (<0.1 l); designed for colorimetric assays and compound storage, especially with automated systems. Ultra-flat surfaces, sidewall gripper lugs, and rigidity optimize this plate for consistent automated handling.

Manufactured of exceptionally clear virgin polypropylene, this plate can withstand repeated freeze/thaw cycles down to -20ºC without adversely affecting dimensional integrity. Raised rims on each well help protect from cross-contamination and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films.

500 uL MicroPlates 

The huge 500 uL round U-bottom wells provide easier access and up to 500 uL per well of working volume in a 14.4 mm high micro-plate. Manufactured from chemically resistant and inert virgin polypropylene, this plate is optimized for sample collection; combinatorial chemistry; library applications, bacterial and yeast growth, storage, mixing, and sample recovery. Ideal for assay work, the unique open bottom design maximizes volume, while larger diameter wells improve sample access and mixing.

The sturdy design and ANSI/SLAS 1-2004 compliant footprint (SBS) allow for automated usage with grippers, stackers, and heater/cooler blocks. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films, help prevent cross-contamination, and reduce sample loss in storage.

Lot to lot tested and certified to be free of RNase, DNase, and Pyrogen contamination.
 

ILP Round Well, Flat Bottom Assay Plates - 96
  

Our flat bottom 96-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays.

Black plates are solid black and opaque in color with no transparency, quenching light, and limiting background autofluorescence. These plates allow for top-read measurements.

White plates are solid white and opaque in color with no transparency, maximizing signal strength and reflection. These plates allow for top-read measurements.

Natural plates allow for top-read or bottom-read measurements in the visible range. Made from high optic transmission grade polystyrene.

They come in standard 8×12 configuration and have molded-in alpha-numeric position markings. Each well offers a working volume of 200 µl.

• Made of polystyrene
• Uniform wall thickness
• Rigid automation-friendly design is compatible with stackers, grippers, heater/cooler blocks
• ANSI/SLAS 2004-1 (SBS) compliant footprint
• Assay plates are tested on a lot-to-lot basis to be RNase, DNase, and pyrogen free.
• Plates are available in sterile and non-sterile and non-treated.

 Specifications
 

Number of Plugs	96
Plug Shape	Round – FLAT
Well Shape Top	Round
Material	Polystyrene
Adhesive Material	None
Color	Varies
Alphanumeric	Molded in
Compliance	ANSI/SBS 6-2012
Certified	DNase-/RNase-/Pyrogen-Free
Max Vol.	390 uL
Working Vol.	340 uL
Vol. w/ Mat Lid	240 uL
Autoclavable	No
Max RCF	2,000 RCF
Max Temp.	70ºC (158ºF)
Min Temp.	-40ºC (-40ºF)

ILP Round Well, Flat Bottom Assay Plates - 384
  

Our black flat bottom 384-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays. Specially packaged sterile, individually wrapped, with a non-reversible clear polystyrene lid. These completely black, polystyrene, flat-bottom assay plates provide the best signal: noise ratio in top-read fluorescence.

Our white flat bottom 384-well assay plates are ideal for luminescence and applications seeking increased signal sensitivity. These completely white, polystyrene, flat-bottom assay plates were specifically designed for luminescence applications. The highly reflective solid white color boosts signal while reducing well-to-well crosstalk.

Our clear flat bottom 384-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and absorbance/colorimetric assays (400-900nm wavelength). Made from high optic transmission grade polystyrene, these clear flat bottom assay plates allow for top-read or bottom-read measurements in the visible range.

They come in standard 8×12 configuration and have molded-in alpha-numeric position markings. Each well offers a working volume of 110ul. The rounded corner well design eliminates capillary action that can occur with square-cornered plates.

Ultra-flat surfaces, sturdy design, and rigidity optimize our 384-well assay plates for consistent handling with a variety of automated platforms for high throughput workflows.
Plates are standardized to comply with ANSI/SLAS 2004-1 guaranteeing proper fit.

• Made from polystyrene
• Uniform wall thickness
• Rigid automation-friendly design with gripper lugs
• Fits all ANSI/SLAS 2004-1 (SBS) compliant fixtures and equipment
• Lot tested and certified RNase, DNase, and pyrogen free
• Plates are available in sterile and non-sterile and non-treated

Specifications

Number of Plugs	384
Plug Shape	Square - Flat
Well Shape Top	Square
Material	Polystyrene
Adhesive Material	None
Color	Varies
Alphanumeric	Molded in
Compliance	ANSI/SBS 6-2012
Certified	Dnase-Rnase-/Pyrogen-Free
Max Vol.	130 uL
Working Vol.	110 uL
Vol. w/ Mat Lid	30 uL
Autoclavable	No
Max RCF	2,000 RCF
Max Temp.	70ºC (158ºF)
Min Temp.	-40ºC (-40ºF)

 

Multi-colored 96 Well Orienter

For easy identification of samples in microplates, vertically or horizontally oriented bright colors make it easy to distinguish between columns. Fits most standard flat and round bottom 96-well plates. Available in horizontal and vertical orientations.
 

Proudly made in the USA! Click here for more made in America products!

• The Microplate Replicator is a simple and inexpensive time saver which is ideal for transferring small volumes of innoculum from 96 well microplates to other microplates or solid supports.


• It can be used for replication of cosmid and YAC libraries, innoculation of filters for colony hybridization, antibiotic sensitivity testing, phage typing and a host of other uses.


• The Replicator's pins are durable stainless steel that are precision aligned to ensure long term performance and its comfortable handle remains cool to the touch during repeated flame sterilization.


• The Microplate Replicator is supplied with an anodized aluminum storage pan which also serves as an ethanol container during flame sterilization and cleansing pads for easy removal of built up debris.

• Warranty: Two Year Parts and Labor