Home  >  PCR, Protein, RNA, DNA  >  Protein  >  Plates, Plate Film, Chromatography and Equipment
|◀ ◀ 133 - 144 of 145 ▶ ▶|
View:

Aluminum 11mm Silver Seal PTFE/Silicone 1000


A variety of closures are available for crimp top vials including aluminum seals w/various types of septa.

These include:

5140-11: 11 mm Silver Seal, Clear PTFE/Red Rubber septa
5150-11: 11 mm Silver Seal, PTFE/Silicone septa

Case pack of 1000 caps. 
 
Item#:
ASALUMSEALB
Spring for Standard Opening

Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

4005BS-425 50 uL Glass Conical Insert w/ Bottom Spring---case pack of 100
4015BS-529 100 uL Glass Conical Insert w/ Plastic Flange-case pack of 100
4025-531 250 uL Glass Flat Bottom Insert-case pack of 1000
Item#:
4005BS-425
Your Price:
73.19
Each
PTFE/Silicone 1000/cs

A variety of closures are available for crimp top vials including aluminum seals w/various types of septa.


These include:
5140-11 11 mm Silver Seal, Clear PTFE/Red Rubber septa
5150-11 11 mm Silver Seal, PTFE/Silicone septa

Case pack of 1000 caps.

Item#:
5150-11
Your Price:
306.59
Each
12x32mm, 9mm Neck Screw Thread

2 mL Clear R.A.M. Vial with White Graduation Spot

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

These 2 mL chromatography R.A.M vials have a 40% larger opening and are specifically designed to work in robotic arm autosamplers (i.e.: Agilent). They are made of clear Type I borosilicate glass and are available with white graduated marking spots - easy to write on with a #2 pencil.

The Large Opening R.A.M. vials make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

 

Specifications:

  • Material Type: Type I borosilicate glass
  • Color: Clear
  • Capacity: 2 mL
  • Outside Diameter: 12 mm
  • Overall Height: 32 mm
  • Neck Size: 9 mm
Item#:
32009E-1232
Your Price:
248.13
Each
volume, 11mm, snap/crimp,

100µL Polypropylene Limited Volume Snap Ring/Crimp Top Vials
Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

These 100 µL Plastic Vials with 11mm Snap Ring/Crimp Top make an excellent choice to daily chromatographic and other experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

They are made with translucent polypropylene and are compatible with many solvents; ideal for storing pH sensitive samples.


Applications:

  • Ion chromatography
  • Capillary electrophoresis
  • Atomic absorption
  • pH sensitive samples
  • Sodium and heavy metals analyses
  • Aqueous samples

Specifications:

  • Material Type: Polypropylene (PP)
  • Capacity: 100 Microliters
  • Outside Diameter: 12mm
  • Overall Height: 32mm
  • Thread/Crimp Size: 11 millimeters
  • Maximum temperature usage: 135°C/275°F.

 

Case Pack: 1000 pieces
Item#:
30111P-1232
Your Price:
233.41
Each
mm, 11 mm Crimp Clear

2 mL Clear Snap Seal Vials

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

The Snap Seal Vial has more glass in the neck area to minimize breakage of the neck during decapping. It can be securely sealed with an aluminum crimp seal, the Poly Crimp Seal, or a variety of Snap Top Cap designs.


The vials incorporate the StepVial design that centers a limited volume insert in the vial neck with precision, assuring reliable, dependable use with autosamplers.


These 2mL Clear Snap Seal Vials make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

Specifications:

  • Material Type: Type I borosilicate glass
  • Color: Clear
  • Capacity: 2 mL
  • Outside Diameter: 12 mm
  • Overall Height: 32 mm
  • Thread/Crimp Size: 11 millimeters
Case Pack: 1000 pieces
Item#:
31811-1232
Your Price:
193.41
Each

Silicone Mats, Round

Compression molded silicone sealing mats with 8.5mm diameter round plugs, are designed for 96-well storage and assay plates. Produced from the highest quality research grade silicone, they are specially designed to provide a positive and airtight seal. Mats fit tightly into wells preventing evaporation of VOCs, sample loss in storage, cross contamination, and reducing the risk of aerosols and pathogens venting during the automation process. They work in a wide range of temperatures for incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents.
These seals pare well with automation as-well-as manual laboratory protocols. Often used in high-throughput applications or those involving accessing the sample through the cover multiple times.
High quality silicone, resists coring and tearing reducing the risk or mat particulate entering the well. Well perforations will seal themselves, after penetration, ensuring an airtight closure. These mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples. Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused. Printed alpha numeric grid for easy reference.
Item#:
ASSILICONEMATRUND
Top Vial, 11mm Crimp Finish

2 mL Clear R.A.M. Vial with White Graduation Spot

Consistently and Quality Made with Affordable Prices: Excellence in Chromatography

These 2 mL chromatography R.A.M vials have a 40% larger opening and are specifically designed to work in robotic arm autosamplers (i.e.: Agilent). They are made of clear Type I borosilicate glass and are available with white graduated marking spots - easy to write on with a #2 pencil.

The Large Opening R.A.M. vials make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must have for your research.

 

Specifications:

  • Material Type: Type I borosilicate glass
  • Color: Clear
  • Capacity: 2 mL
  • Outside Diameter: 12 mm
  • Overall Height: 32 mm
  • Neck Size: 9 mm
Item#:
32011L-1232
Your Price:
195.16
Each

Scintillation Vials

High quality scintillation vials available in three sizes to satisfy a range of applications. Designed to provide consistently low background counts and are suitable for low activity counting. The smaller sizes are very economical to use since they require smaller quantities of solvent.

The 20 mL Scintillation Vial has multiple uses in scintillation counting, gamma counting, chromatography, sample storage and culturing. Because of its leak-tight cap it is also commonly used to store and transport histological specimens in 10% formalin. This scintillation vial provides a high degree of resistance to organic solvents and sufficient translucence so that reagent levels can be easily seen. The unique thread design of the closure permits the vial to be sealed tight with an easy 1/4 turn and with minimum pressure.

The 6.5 mL Scintillation Vials are securely sealed by simply snapping the caps on. The cap is conveniently removed with an easy 1/4 turn to the left.

The 4 mL Polyethylene Scintillation Vial uses a full turn polypropylene screw cap. This small volume scintillation vial is the most economical size to use because it requires the least amount of solvent.

Item#:
ASVIALSSCINN

NEST 3D Barcode Cryogenic Vials

  • The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards
  • Cap is made of high-density polyethylene (HDPE), so that the vial is recommended to be used in -196°C liquid nitrogen phase
  • DNase/RNase free, non-endotoxin
  • Electron beam sterilization, SAL = 10-6

    • The two-color vial body of an integrated injection molding can realize multi-code tracking, and it can support the traceability of samples and data sharing among multiple users, laboratories and automation, making the warehousing and ex-warehousing of samples more convenient and faster, while ensuring the safety of the sample storage process.


    Three-code-in-one (digital code, barcode, QR code)
    The vial has laser-etched international standard DATAMATRIX 2D code at the bottom.
    The barcode and digital code at the side are anti-fading, anti-deforming, wear proof and resist DMSO and other organic solvents; 100% clear and readable.


    NEST Advantages
  • Low temperature test: -80°C cryogenic freezing test, -196°C liquid nitrogen test
  • Sealing test
  • Sterility test
  • Endotoxin test, DNA and RNA enzyme test


    • The product meets the SBS standard and provides an effective safety guarantee and management for biological sample libraries and other warehouses of various chemicals and biological products stored at low temperatures.

    Item#:
    AD3DBARCCRYVIALS
    Polyolefin, 2.8 mil, Ultra-

    These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

    Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

    The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

    Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

    Length

    141.27 mm

    Length (w/ end tabs removed)

    117.5 mm

    Width

    77.8 mm

    Overall Thickness

    2.8 mil

    Adhesive Thickness

    2.0 mil

    Material

    Polyester

    Adhesive

    Encapsulated Silicone

    Max. Temperature

    120 °C

    Min. Temperature

    -40 °C

    Primary Usages

    Real Time PCR (qPCR), PCR
    Item#:
    MID-UC500
    Your Price:
    1114.00
    Each
    Storage Film

    The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.

    This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.

    The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.

    For PCR applications see our standard PCR film or our Real Time PCR film.

    For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.

    Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

    Length

    146.05 mm

    Length (w/ end tabs removed)

    119.05 mm

    Width

    79.38 mm

    Overall Thickness

    3.1 mil

    Adhesive Thickness

    1.1 mil

    Material

    Polyester

    Adhesive

    Medical Grade Acrylic

    Max. Temperature

    120 °C

    Min. Temperature

    -40 °C

    Primary Usages

    Elisa, Storage or Sample Cover
    Item#:
    MID-PCR-TS
    Your Price:
    195.00
    Each
    This item is discontinued
    |◀ ◀ 133 - 144 of 145 ▶ ▶|
    View: