|◀ 433 - 444 of 576 ▶|
View:

AxyMat Sealing Mats

  • Multi-use silicone sealing mats
  • Natural color
  • Autoclavable and washable
  • Pierceable and self-sealing
  • Item#:
    ASAXYMATB


    96-Round Well, V Bottom, MicroPlates

     

     

    Huge round top wells (with conical V-bottom) provide easier access and up to 480 µL per well of working volume in this short (14.4mm high) micro-plate.

     

    Manufactured from chemically resistant and inert virgin polypropylene, this plate is optimized for sample collection; combinatorial chemistry; library applications, bacterial and yeast growth, storage, and sample recovery.  

     

    The V-bottom design helps to concentrate reagents and samples, by minimizing the amount of both needed. It also improves sample recovery, while larger diameter wells improve sample access and overall volume.

    The sturdy design and ANSI/SLAS 2004 compliant footprint (SBS) allow for automated usage with grippers, stackers, and heater/cooler blocks.

    Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films, help prevent cross-contamination, and reduce sample loss in storage.

     

    Lot to lot tested and certified to be free of RNase, DNase, and Pyrogen contamination.

     

    Item#:
    AS96RNDVBOTTOMPL
    w/ Bottom Spring for Stnd.

    Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

    4005BS-425 50 uL Glass Conical Insert w/ Bottom Spring---case pack of 100
    4015BS-529 100 uL Glass Conical Insert w/ Plastic Flange-case pack of 100
    4025-531 250 uL Glass Flat Bottom Insert-case pack of 1000
    Item#:
    4015BS-529
    Your Price:
    59.78
    Each

    Limited volume inserts are available in either glass or polypropylene and both conical and flat bottom varieties. For inserts with polymer bottom spring, the spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical inserts permit complete sample removal.

    4005BS-425 50 uL Glass Conical Insert w/ Bottom Spring---case pack of 100
    4015BS-529 100 uL Glass Conical Insert w/ Plastic Flange-case pack of 100
    4025-531 250 uL Glass Flat Bottom Insert-case pack of 1000
    Item#:
    ASCHROMVIAL2
    • Unique design offers users a leakproof fit with ony one-half turn of a cap.
    • Nominal Volume Of 7ml
    • Ideal For Sample Storage
    • Vials Are Autoclavable
    • Compatible With All Major Liquid Scintillation Counting Systems
    • Dimpled Bottoms To Facilitate Filter-Paper Counting
    Item#:
    ASCHROMVIAL1

    NEST Deep Well Plates

    • High chemical stability
    • Temperature range: -80°C to 120°C
    • Autoclavable
    • Centrifugal strength up to 3000 g
    • Compatible with multi-channel pipette and automatic equipment
    • Optimized bottom design to minimize residual volume
    • Clear alphanumeric codes for easy identification
    • Conform to SBS/ ANSI
    • Specific 96 well deep plate used in nucleic acid extraction
    • Stackable, reliable tight sealing
    • Non-pyrogenic, DNase/RNase free
    • Both E-beam sterilized, and non-sterilized deep well plates are available


    Material
    USP VI Polypropylene material

    Item#:
    ASDWPLATES

    Silicone Sealing Mat for 34, 48, 96, and 384-well

    silicone sealing mats for storage plates and micro-plates minimize sample evaporation in a wide range of temperatures in incubation and storage applications; especially for storage at higher temperatures or for applications involving aggressive solvents.

    These seals pare well with automation as-well-as manual laboratory protocols.  Often used in high-throughput applications or those involving accessing the sample through the cover multiple times.  Well perforations will seal themselves, after penetration, ensuring an airtight closure to the well.

    Our mats are chemically resistant and reusable; containing no adhesives or extractables to contaminate samples.  Made of research-grade silicone, they can be autoclaved, and following a 10% bleach wash and ethanol rinse protocol may be reused.

    • Made of research-grade silicone
    • Perforated wells for easy sample access
    • Re-sealable perforations
    • Resists coring and tearing
    • Eliminates cross-talk between wells
    • Suitable for high-temperature storage
    • Mats can be reused
    • For use with assay and storage plates
    • Printed alpha numeric grid for easy reference
    • Used for sample and compound storage.
    Item#:
    ASSSSM
    Thread closure and Septa 9mm

    A variety of closures and septa are available for R.A.M. vials including:

    5395F-09 9mm R.A.M. cap, black, PTFE/Sil Septa
    5397F-09 9mm R.A.M. cap, black, PTFE/Silicone w/ slit

    Case pack of 1000 caps/septa

    Item#:
    5397F-09
    Your Price:
    352.31
    Each

    384-well transparent tissue-culture treated (TC-treated) microplate for cell-based absorbance (colorimetric) assays.

    Item#:
    6007658
    Your Price:
    1095.00
    Each
    • Titer-Tops are pre-cut, adhesive films for sealing microplates to prevent sample evaporation, well-to-well contamination, and sample spillage.
    • They are durable and thick (4.4mil), yet are easily pierced with a pipette tip for easy sample access.
    • Made of a polyethylene film with an FDA approved non-cytotoxic acrylic adhesive that is waterproof, solvent resistant, and sterile.
    • There are two scored end tabs for easy positioning and the film is chemically resistant and thermally stable.
    • They stay solidly in place even when exposed to 100% humidity and extreme temperatures from -40°C to +100°C (Not recommended for use in thermal cyclers).
    • Titer-Tops are easily marked with any writing instrument.
    Item#:
    T-TOPS-50
    Your Price:
    39.25
    Each
    |◀ 433 - 444 of 576 ▶|
    View: