The Lab Mat is an economical solution to help keep benchtops clean and safe from stains, spills and wear. The lab mat is made from a durable FDA approved silicone material that creates a stain resistant washable working surface. When the mat is done being used, it can be easily cleaned using any standard disinfectant by simply wiping it, or putting it in a dishwasher. Since the lab mat is reusable, it helps reduce waste.

The lab mat offers a large working surface that is anti-skid which helps keep items in place. The mat's surface is also noise dampening, reducing sound from vibration from lab equipment. The lab mat can be used with items such as centrifuges, vortex mixers, hot plates, stirrers, pipettes and so much more. When using the mat with magnetic stirrers there is a designated area with internal metal inserts to keep stir bars from wandering around the working surface. A lip design around the outer edge of the mat helps contain spillage that may occur when in use keeping benchtops safe and clean.

• Made from FDA food grade silicone
• Ideal for every type of laboratory and more specialized areas such as cold rooms, clean rooms, sterile suites and areas where high sterility is a requirement
• Protect countertops from hot items up to 200°C (392°F)
• General chemical resistance from moderate oxidizing chemicals, concentrated sodium hydroxide
• NOT RESISTANT to many solvents, oils, concentrated acids and dilute sodium hydroxide
• Washable with standard disinfectants in sinks or dishwashers
• Autoclavable at 121° for 15 minutes

• Safe storage container to be used with disposable bags
• Three sizes of stationary containers supplied with hinged or fitted lids
• Easy to move mobile containers equipped with heavy duty casters and large handle

These easy to use timers/stopwatches come either with 4 (HS24490D-. Measures 71 x 61 x 25mm), 3 (HS24490M-. Measures 64 x 86 x 22mm.) or 2 (HS24780- Measures 82 x 140 x 13mm ) independent timers and alarms.  The audible and visual alarms tell you time is up and allow for countdowns or clocks.  They are designed for mounting wit a magnetic back (HS44490D or M) or a bracket and can also sit upright on your lab bench. 

Magnetic Pipette Rack

Bio-bin® Waste Disposal Containers

The ideal solution for biohazard or non-hazardous waste

REDUCE Cost, Weight, Transport, CO2 Emissions, Storage Space

Dynalon Bio-bins are a new cost effective and convenient alternative to rigid plastic waste collection and disposal containers. Ideal for use in academic, clinical, government and industrial laboratories for a wide range of non-sharps biomedical and laboratory waste that require special heat treatment such as autoclaving or incineration before disposal. Items such as microbiological loops, pipettes, tips, test tubes, swabs and vials are ideal for disposal by this method.

• Space efficient, light weight fold-flat design
  
• Built-in lid and handles
  
• Temporary & permanent seals
  
• Stackable post use. UN 3291 Approved
  
• Printed user instructions & user ID/date information on lid
  
• Waterproof construction
  
• Built-in super absorbent Bio-matt to soak up any excess liquid in Bio-bin
  
• Autoclavable. Use with Autoclave Sterility Tape.
  
• Supplied with 2 x 2" Biohazard Waste Labels
  
• Reorder information printed on the Bio-bin

  Item#	Description	Bin Size When Sealed	Bin Size When Opened
  797303-002	Bio-Bin, Loop Model, 2.5L, 50/cs	230mm x 110mm x 120mm	230mm x 110mm x 243mm (9x4.33x9.56")
  797303-0006	Bio-Bin, Pipette Model, 6L, 40/cs	153mm x 153mm x 380mm	153mm x 153mm x 527mm (6x6x20.75")
  797303-0030	Bio-Bin, Floor Model, 30L, 10/cs	280mm x 280mm x 415mm	280mm x 280mm x 644mm (11x11x25.35")
  		Stand Size
  797303-6100	Bio-Bin, U-Stand, for 6L, 1ea	180mm x 274mm x 313mm	7.1x10.8x12.32
  797303-200	Bio-Bin, Z-Stand, for 6L, 1ea	170mm x 170mm x 200mm	6.7x6.7x7.87

• Accommodates most test tube racks
• Refrigerator and freezer compatible

Acrylic Parafilm Dispenser