S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Lab Ovens and Incubators
Your work is important. That’s why every incubator and laboratory oven from MIDSCI™ is reliably engineered and stringently tested.
MIDSCI™ has the incubator oven for your research applications. Manufactured by respected names like Labnet, Shel Lab, Lab Companion, BINDER, Benchmark, and more, these lab incubators deliver the performance you can rely on.
Features include excellent temperature uniformity and accuracy, rapid temperature recovery after opening, and over-temperature protection.
And if you’re looking for a lab oven, then you’ll have a wide selection to choose from.
We have gravity and forced convection ovens, hybridization ovens, and vacuum ovens.
MIDSCI™ also provides two options for hybridization ovens with shaking: Shake ‘n’ Bake hybridization oven from Boekel and Problot 12S hybridization oven from Labnet.
The SHEL LAB Incubator Shakers provide a controlled environment for continuous growth of biological organisms. Market applications include microbiology, tissue culture, cell culture, and bacteriology. The SSI5 features our unique counter balance weighting system that is adjustable to accommodate off-center loads, varying capacities and stroke lengths, which in turn allows for smoother operation. The user adjustable rotational stroke accommodates different types of cells and provides maximum oxygen transfer. The unit has a small footprint and includes shelf space for static incubation during shaking.
All major functions (temperature, RPM, and time) have alarms that alert the user to deviations from set parameters. Overtemperature protection is provided via a safety thermostat. Digital keypad operation offers the ability to calibrate the temperature controller to a reference thermometer. To better support the load over years of constant use, we utilize four load bearing positions for optimal weight distribution.
Features include:
- Microprocessor Control
- Load Flexibility
- Shaking Platform Included
- Independent Controls for Temperature, Timer, and Shaker
- 1.5" Access Port
- Electrical Outlet
- Interior Light
- Full Line of Shaking Accessories
- 24 Month Limited Warranty
EXTERIOR DIMENSIONS (W × D × H)
28.5 × 29.5 × 40.5
(724 mm × 750 mm × 1029 mm)
INTERIOR DIMENSIONS (W × D × H)
19 × 20.5 × 22.5
(482 mm × 521 mm × 571 mm)
VOLUME
5.5 cu.ft. (156 L)
SHELF DIMENSIONS (W × D)
17.2 × 17.2 (437 mm × 437 mm)
UNIT WEIGHT
198 lbs (90 kg)
INTERIOR METAL
300 SST
EXTERIOR METAL
Painted Cold Roll Steel
OPERATING TEMPERATURE RANGE
Amb +8C - 60C
TEMPERATURE UNIFORMITY - MIDRANGE
0.8 °C
TEMPERATURE STABILITY - MIDRANGE
0.1 °C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1 °C
POWER VOLTAGE , FREQUENCY AND CURRENT
110-120 VAC, 50/60 Hz, 8.5 Amps
MAX HVAC LOAD
2947 BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE
With the B series incubator, you obtain a reliable and powerful unit in a solid configuration at a very attractive price. Series feature: Incubators Classic Line with mechanical adjustment
Features:
- Temperature range: 30°C to 70°C
- Hydro-mechanical thermostat
- Inner door made of tempered safety glass
- 2 chrome-plated racks
With its wide temperature range and extensive program functions, a BINDER cooling incubator ensures reproducible conditions in the microbiology laboratory.
Features:
- Temperature range (Model 23): 0°C to 100°C
- Temperature range (Models 53, 115, 240, 400, 720): -5°C to 100°C
- APT.line¢ preheating chamber technology
- Cooling with compressor cooling unit
- Door heating system from 240 liters
- Adjustable fan speed
- Controller with time-segment and real-time programming
- Elapsed time indicator
- Inner door made of tempered safety glass
- 2 stainless steel racks
- Units up to 115 liters are stackable
- Access port with silicone plug from 240 liters
- Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
- Computer interface: RS 422
Series KB Specifications:
Description |
KB 23 |
KB 53 |
KB 115 |
KB 240 |
KB 400 |
Part # |
9020-0113 |
9020-0252 |
9020-0253 |
9020-0254 |
9020-0179 |
Basic data |
|||||
Interior volume [L] |
20 |
53 |
115 |
247 |
400 |
Housing dimensions not incl. fittings and connections W x H x D [mm] |
435 x 620 x 520 |
635 x 835 x |
835 x 1.025 x |
925 x 1.465 x |
925 x 1.950 x |
Interiors dimensions |
222 x 330 x 277 |
400 x 400 x 330 |
600 x 480 x 400 |
650 x 785 x 485 |
650 x 1.270 x 485 |
Technical data: Temperature |
|||||
Temperature range [°C] |
0 ...100 |
-5...100 |
-5...100 |
-5...100 |
-5...100 |
Temperature variation at 37°C [± K] |
0,3 |
0,3 |
0,2 |
0,2 |
0,3 |
Temperature fluctuation max. [± K] |
0,1 |
0,1 |
0,1 |
0,1 |
0,1 |
Recovery time after door was opened for 30 sec. at 5°C [min] |
2 |
1 |
1 |
1 |
2 |
Operating Features
- Temperature control: +10°C to 40°C at ambient temperature of 25°C.
- Microprocessor PID control.
- Simple calibration and auto-tuning functions.
- Digital timer with Delayed ON/OFF function: 1 min to 99 hr 59 min.
- High temperature limit setting and open door alarm.
- Convenient preset function for 3 most commonly used temperature settings.
- Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile.
- Adjustable 3-step fan speed with defrosting time and period control.
- Intuitive control panel with bright LED display (0.1°C resolution) and touch-sensitive keypad.
- RS-232 interface.
Constructional Features
- Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
- Environment-friendly insulation material (EPDM) used for safety and convenience.
(compliant with ASTM-C534 specification) - Space-saving design allowing even the smaller (14L) unit to hold two 1000mL Erlenmeyer flasks.
| Model | ILP-02 | ILP-12 | |||
|---|---|---|---|---|---|
| Chamber Volume (L / cu ft) | 14 / 0.5 | 48 / 1.7 | |||
| Temperature | Range (°C / °F) | 10 to 40°C (50~104°F) at ambient temperature of 25°C | |||
| Fluctuation 1) at 25°C (±°C / °F) | 0.1 / 0.18 | ||||
| Variation 1) at 25°C (±°C / °F) | 0.5 / 0.9 | 0.4 / 0.72 | |||
| Dimension (WxDxH) |
Interior (mm / inch) | 315x200x230 / 12.4x7.9x9.1 | 334x334x430 / 13.1x13.1x17 | ||
| Exterior (mm / inch) | 430x495x400 / 17x19.4x15.7 | 430x665x620 / 17x26.2x24.4 | |||
| Net Weight (Kg / lbs) | 27.5/60.6 | 49/08 | |||
| Electrical Requirements (230V) | 60Hz, 1.8A | 50Hz, 1.8A | 60Hz, 3.5A | 50Hz, 3.5A | |
| Electrical Requirements (120V) | 60Hz, 3.4A | 60Hz, 6.7A | |||
| Cat. No. | AAH24033U | AAH24043U | |||
Mini Microbiology and Hematology Incubator
- Ideal for microbiology or hematology applications
- Corrosion resistant chamber
- Three shelf levels
- Door with large viewing area
- Pilot light to indicate heating
- 1 year warranty
Labnet's Mini Incubator is compact and economically priced, yet offers features not typically found in a basic incubator. The housing is all metal, as is the door frame. A plexi-glass window in the door offers full visibility to the interior. One shelf is included, and can be adjusted to three different levels - additional shelves can be purchased to increase storage capacity.
The heating elements in Labnet's Mini Incubator are incorporated into the bottom and sides of the housing. This provides better temperature stability and uniformity than other incubators in it's class. A grommet hole in the top of the unit can hold a thermometer for accurate temperature setting.
In addition, the Mini Incubator has a port in the rear of the chamber which allows for an electrical cord to be routed out the back. Labnet's Mini LabRoller is a perfect fit and can be used in the Incubator with any of the available rotisseries.
Specifications
Temperature Range | Ambient +5° to 70°C |
Capacity | 0.375 cu. ft. (9.2 L) |
Controls | Analog |
Exterior Dimensions | 11.2 x 11 x 13.2 in. (28.5 x 28 x 33.5 cm) |
Interior Dimensions | 19 x 7.9 x 7.9 in. (23 x 20 x 20 cm) |
Weight | 26.6 lbs. (12 kg) |
Electrical | 120V~ or 230V~, 50/60 Hz |
This promo cannot be combined with other promotions or discounts. All terms apply.
FEATURES:
- Eco-friendly with low power consumption & low global warming potential (GWP)
- Easily reverse the door opening
- One degree (± 1°) from ambient temp. (non-refrigerated)
- Secure-Grip Modular Shelving: shelves are adjustable, removable and can easily be swapped between models
- Run-Silent Operation (softer than normal conversation)
- Intelligent temperature control with cross directional airflow for maximum heat distribution (no interior fan)
- Self-Close 90°: Door will automatically close at any angle under 90°
- Two (2) Year Warranty
- FDA registered manufacturer
- External access ports on rear panel for connecting devices such as shakers and rockers
Specifications |
HettCube200 |
HettCube 200R |
HettCube 400 |
HettCube 400R |
HettCube600 |
HettCube 600R |
Temperature range for incubators/coded incubators |
1 K above ambient temperatures up to +65°C/ 0°C to +65°C for cooled incubators |
|||||
Exterior dimensions (incl. adjustable feet and bushing on rear panel) (WxDxH) in inches |
28x32.5x38 |
28x32.5x56 |
28x32.5x78.5 |
|||
Internal dimensions (WxDxH) in inches |
21x27x16.5 |
21x27x33.5 |
21x27x56 |
|||
Internal volume in cubic feet |
5.2 |
10.9 |
18.3 |
|||
Foot print in sqft |
6.5 |
6.5 |
6.5 |
|||
weight in lbs |
183 |
207 |
243 |
267 |
353 |
377 |
Number of shelves provided as standard |
2 |
3 |
4 |
|||
Temperature fluctuation at + 37°C |
±0.1K |
|||||
Temperature uniformity at + 37°C |
±0.2K |
|||||
Temperature uniformity at +25°C |
±0.1K |
|||||
Recovery time after door has been opened for 30 s at +37°C |
3 min |
4.5 min |
5.5 min |
|||
Energy Consumption at +37°C |
0.025kWh |
0.038kWh |
0.049kWh |
|||
Noise Level |
<41 dB(A) |
<44 dB(A) |
<41 dB(A) |
<44 dB(A) |
<41 dB(A) |
<41 dB(A) |
Power supply (other voltages upon request) |
120V 1~/50-60 Hz |
|||||
Item no. |
62000-01 |
62005-01 |
64000-01 |
64005-01 |
66000-01 |
66005-01 |
- Precision temperature control, up to 75°
- Dual-Convection technology, excellent uniformity and recovery
- Includes SureCheck™ temperature logger and software
- Stainless steel chamber with internal power outlet
The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class
Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can be viewed and saved using the included SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.
The SureTemp™ series offers Dual-Convection technology, allowing users to choose between mechanical convection mode for exceptional temperature uniformity OR gravity convection mode for longer incubations or drying or samples.
The heating elements are strategically located on multiple sides of the chamber.
*230V units are available upon request.
| Temp. Range | Ambient +5 to 75°C |
| Temp. Accuracy: | ± 0.25°C* |
| Temp. Uniformity: | ± 0.25°C* |
| Temp. Increment: | 0.1°C |
| Temp. Stability: | ±0.1°C |
| Timer: | 1 min. to 99 hours 59 min. (or continuous) |
| Chamber Material: | Stainless Steel (316) |
| Eletrical: | 120V or 230V, 50-60Hz |
| Power Consumption: | 40L: 420W / 70L: 520W / 130L: 670W |
| H2505-40, 40 Liter Model |
H2505-70, 70 Liter Model |
H2505-130, 130 Liter Model |
|
| Interior Dimensions: | 13.7 x 13.7 x 13.7 in. / 35 x 35 x 35 cm |
17.7 x 13.7 x 17.7 in. / 45 x 35 x 45 cm |
21.7 x 17.7 x 21.7 in. / 55 x 45 x 55 cm |
| Exterior Dimensions: | 22.4 x 23.3 x 22.8 in. / 57 x 59.2 x 58 cm |
26.4 x 23.3 x 26.8 in. / 67 x 59.2 x 68 cm |
30.3 x 27.2 x 30.7 in. / 77 x 69.2 x 78 cm |
| Weight: | 42 kg / 95 lbs | 62 kg / 136.5 lbs | 70kg / 154.4 lbs |
Series BD-S Solid.Line | Standard-Incubators with Gravity Convection
Benefits
- Easy handling
- Accurate temperature control
- Simple and ergonomic door opening
Important characteristics
- Temperature range: ambient temperature +5°C to 70°C
- APT.line preheating chamber technology
- Gravity convection
- Adjustable exhaust air flap
- Controller with timer function
- Inner door made of tempered safety glass
- 1 chrome-plated rack, incl. shelf supports
- Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to incubation. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.
Specifications
Item No. |
9090-0017 |
9090-0023 |
Model |
BD-S 56 |
BD-S 115 |
Housing Dimensions* |
24.19 x 24.63 x 22.73 in. |
30.1 x 28.96 x 24.27 in. |
Internal Dimension |
15.76 x 17.34 x 13.79 in. |
21.67 x 21.67 x 15.37 in. |
Net Weight |
79 lbs |
117 lbs |
Interior Volume |
2.2 Cu Ft |
4.2 Cu Ft |
*Housing dimensions do not include fittings and connections
Operating Features
- Temperature control: 0°C to 60°C.
- Microprocessor PID control.
- Simple calibration and auto-tuning functions.
- Digital timer with Delayed ON/OFF function: 1 min to 99 hr 59 min.
- High temperature limit setting and open door alarm.
- Convenient preset function for 3 most commonly used temperature settings.
- Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile.
- Adjustable three-step fan speed with defrosting time and period control.
- Intuitive control panel with bright LED display (0.1°C resolution) and touch-sensitive keypad.
- RS-232 interface.
Constructional Features
- Forced air convection using an optimal cross flow fan for chamber temperature uniformity.
- Large chamber volume: maximum 244L. (8.6 cu ft)
- Built-in electrical outlet with a safety cover inside the chamber.
- Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door.
- Detachable shelves and round-cornered chamber interior allowing easy cleaning.
| Model | IL-11 | IL-21 | |||
|---|---|---|---|---|---|
| Chamber Volume (L / cu ft) | 150 / 5.32 | 244 / 8.6 | |||
| Refrigerator (Hp) | 1 / 8 HBP | 1 / 6 HBP | |||
| Temperature | Range (°C / °F | 0 to 60 / +32 to 140 | |||
| Fluctuationâ1) at 25°C (±°C / °F | 0.1 / 0.18 | ||||
| Variationâ1) at 25°C (±°C / °F | 0.5 / 0.9 | 0.4 / 0.72 | |||
| Dimension(WxDxH) | Interior (mm / inch) | 600x500x500 / 24x20x20 | 500x520x940 / 20x20.5x37 | ||
| Exterior (mm / inch) | 735x742x1010 / 28.9x29x40 | 635x740x1630 / 25x29x64 | |||
| Net Weight (Kg / lbs) | 100 / 220 | 135 / 297 | |||
| Electrical Requirements (230V) | 60Hz, 4.5A | 50Hz, 4.5A | 60Hz, 6.4A | 50Hz, 6.4A | |
| Cat. No. | AAH22041K | AAH22042K | AAH22051K | AAH22052K | |
| Electrical Requirements (120V) | 60Hz, 8.3A | 60Hz, 10.6A | |||
| Cat. No. | AAH22046U |
AAH22056U |
|||
FEATURES:
- Eco-friendly with low power consumption & low global warming potential (GWP)
- Easily reverse the door opening
- One degree (± 1°) from ambient temp. (non-refrigerated)
- Secure-Grip Modular Shelving: shelves are adjustable, removable and can easily be swapped between models
- Run-Silent Operation (softer than normal conversation)
- Intelligent temperature control with cross directional airflow for maximum heat distribution (no interior fan)
- Self-Close 90°: Door will automatically close at any angle under 90°
- Two (2) Year Warranty
- FDA registered manufacturer
- External access ports on rear panel for connecting devices such as shakers and rockers
Specifications |
HettCube200 |
HettCube 200R |
HettCube 400 |
HettCube 400R |
HettCube600 |
HettCube 600R |
Temperature range for incubators/coded incubators |
1 K above ambient temperatures up to +65°C/ 0°C to +65°C for cooled incubators |
|||||
Exterior dimensions (incl. adjustable feet and bushing on rear panel) (WxDxH) in inches |
28x32.5x38 |
28x32.5x56 |
28x32.5x78.5 |
|||
Internal dimensions (WxDxH) in inches |
21x27x16.5 |
21x27x33.5 |
21x27x56 |
|||
Internal volume in cubic feet |
5.2 |
10.9 |
18.3 |
|||
Foot print in sqft |
6.5 |
6.5 |
6.5 |
|||
weight in lbs |
183 |
207 |
243 |
267 |
353 |
377 |
Number of shelves provided as standard |
2 |
3 |
4 |
|||
Temperature fluctuation at + 37°C |
±0.1K |
|||||
Temperature uniformity at + 37°C |
±0.2K |
|||||
Temperature uniformity at +25°C |
±0.1K |
|||||
Recovery time after door has been opened for 30 s at +37°C |
3 min |
4.5 min |
5.5 min |
|||
Energy Consumption at +37°C |
0.025kWh |
0.038kWh |
0.049kWh |
|||
Noise Level |
<41 dB(A) |
<44 dB(A) |
<41 dB(A) |
<44 dB(A) |
<41 dB(A) |
<41 dB(A) |
Power supply (other voltages upon request) |
120V 1~/50-60 Hz |
|||||
Item no. |
62000-01 |
62005-01 |
64000-01 |
64005-01 |
66000-01 |
66005-01 |
One Model for Heating and Cooling with Accurate Temperature Control from 0° to 60°C
Overview
The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.
A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.
With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).
Features
- Accurate temperature control from 0° to 60°C
- Powerful compressor maintains 0°C
- Stainless-steel internal chamber
- Internal power outlet for shaker, mixers, etc.
- Sized for floor standing use or on bench-tops less than 32" tall
Technical Data
|
Temp. Range: |
0°C to 60°C (RT-25°C to 60°C) |
Temp. Accuracy: |
0.5°C (at 37°C) |
Temp. Uniformity: |
+/- 1.0°C (at 37°C) |
Temp. Increment: |
0.1°C |
Exterior Dimensions: (WxDxH) |
21.25 x 21 x 39.35 in. |
Interior Dimensions: (WxDxH) |
15.75 x 12.75 x 19.75 in. |
Capacity: |
65L (2.3 cu. ft.) |
Weight: |
117 lbs |
Refrigerant: |
R134A |
Electrical: |
120, 60HZ or 230V, 50Hz (385W) |
Warranty: |
2 Years |
Operating Temp. Range: |
+10 to +30°C |
- Shake and incubate samples simultaneously
- Interchangeable platforms for tubes and plates
- Fine-tune Speed Control
- Rapid heating and cooling
AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.
Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2mL to 15mL. Designed to meet the high-paced demands of today's lab, the exceptional performance of this product make it an essential part of your daily research.
| Product Specifications | ||
| Model | 1-4001-HCS | 1-4002-HCS |
| Temperature range | Ambient -14° to 100°C | Ambient -14° to 100°C |
| Temperature accuracy | ±0.5°C | ±0.5°C |
| Speed range | 300 - 1500rpm | 300 - 1500rpm |
| Motion/orbit | Horizontally circular/3 mm | Horizontally circular/3 mm |
| Capacity | Per selected block style | Per selected block style |
| Dimensions (W x D x H) | 12.9 x 6.5 x 9.8 inches/33 x 16.6 x 24 cm | 12.9 x 6.5 x 9.8 inches/33 x 16.6 x 24 cm |
| Weight | 18.75 lb/8.5 kg | 18.75 lb/8.5 kg |
| Electrical* | 120V~, 60 Hz | 230V~, 60 Hz |
Inquire about additional accessories:
1-4000-A, 1-4000-B, 1-4000-C, 1-4000-D, 1-4000-E, 1-4000-G, 1-4000-H, 1-4000-J
Web Content Viewer
Actions