The CE Oven Series incorporates the Sure Load shelf system, triple wall construction, easy to read microprocessor controls. Adjust the air exhaust from the chamber without putting your fingers near the heat source. Even at temperatures of 225°C the outer skin of this unit meets all CE requirements, meaning your application will stay hot but your workspace will not. The CE series ovens are CE approved.

This gravity convection oven provides a degree of uniformity comparable to most forced air ovens on the market. The 99 min 59 hr digital timer has an independent control so its use is optional. Once the timer expires the power is cut to only the heating elements. The CE family is our lastest installment of a product of Constant Thinking.

These units include:

• Sure Load Shelf Design
• Non-Tip Shelves
• Microprocessor Controls
• Suberb Temperature Control
• Cool Touch Damper
• Digital Timer to 99hr and 59 min
• CE Approved
• Warranty: 2 years

• Used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing
• Quick run-up and recovery times
• Exterior has a hard, scratch-resistant hammer finish on a heavy steel double-wall construction
• Temperature is controlled by an automatic hydraulic or a bi-metal thermostat
• UL and CSA recognized
• Warranty: 18 months

Our high strength glass bottles are available in many size configurations to suit various hybridization applications efficiently. Manufactured of low beta emitting borosilicate, they reduce exposure to radioactivity. Exposure is further limited by the leak proof closure system. 

Blue Cap = Polyethylene With O-Ring Seal; Temp. Resistance: -40°C to +140°C
Red Cap = Polyethylene With Teflon Seal; Temp Resistance: -45°C to +200°C

The CE Oven Series incorporates the Sure Load shelf system, triple wall construction, and easy-to-read microprocessor controls. Users can adjust the air exhaust from the chamber without being near the the heat source. Even at operating temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool. 

The 99 hr 59 min digital timer has an independent control, so its use is optional. Once the timer expires, the heating elements turn off while the blower continues running to cool the samples inside the oven. 

Whatever the application, these forced air ovens deliver precise uniformity, air distribution and the peace of mind expected from the SHEL LAB brand. All of the SHEL LAB CE series ovens are CE approved. The CE family is our lastest installment of a product of Constant Thinking. 

These units include:

• Sure Load Shelf Design
• Non-Tip Shelves
• Microprocessor Controls
• Horizontal Air Flow
• Cool Touch Damper
• Digital Timer to 99hr and 59 min
• CE Approval
• Warranty: 2 years

SCO10A CO2 INC, AJ, HEPA, 10 CU FT, STACKED, 115 V

Model SCO10A is a stacked version of our SCO5A incubator and is ideal for sensitive tissue and cell culture applications. It provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.

Standard Design Features:

• Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
• Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C
• Humidity levels maintained through evaporation of up to 95%
• Data logging capabilities

Designed to minimize contamination; includes:

• Patented copper-caged HEPA filter
• Heated door to ensure superior temperature uniformity and reduce the potential for condensation to form on the inner glass door
• Durable stainless-steel chamber for easy cleaning
• Exclusive heated copper CO2 inlet to prevent moisture from being introduced into the chamber
• Copper shelving option
• Autoclavable shelving system
• Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor

 
SureTherm™ CO₂ Incubator Series with IncuView™ LCI

• Precision temperature control
• 6-sided heating, ambient +5°C to 60°C
• Heated door and door frame
• Prevents condensation
• Excellent accuracy and recovery after opening the door
• Quick recovery of temperature and CO₂
• Internal microscope option
• Monitor cells on the display or remotely on a smart device

Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark's SureTherm^™ Incubators provide the perfect environment for your cultures. All SureTherm^™ Incubators feature a proprietary heat distribution system that combines six-sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). Two chamber volumes are available – 45 L and 180 L.  The 180 L model also includes options for high heat decontamination, a split glass door and oxygen gas control.

These are the first and only incubators with the optional (patent pending) IncuView^™ LCI (Live Cell Imaging) technology for viewing cells in "real time". An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a Wi-Fi enabled phone, tablet or computer. Cell viewing requires the IncuView^™ Integrated Microscope Shelf.

 
Incubator specifications

Temperature Range	Ambient +5°C to 60°C
Temperature Accuracy	±0.1°C
Temperature Uniformity	± 0.4°C
Temperature Increments	01°C
Temperature Stability	0.1°C
CO2 Range	0 to 20%
CO2 Increment	0.001
CO2 Accuracy	± 0.1%
CO2 Sensor	Dual Beam IR
Heat Decontamination	Yes, Models 180HD and 180HDO2 only
O2 Range	0.5 to 20% (180HDO2 Model ONLY)
O2 Accuracy	±0.3% (180HDO2 Model ONLY)
Chamber Dimensions 45 L (W x D x H)	13.2 x 14.2 x 15.4 in. | 33.5 x 36.1 x 39.2 cm
Chamber Dimensions 180 L  (W x D x H)	18.7 x 20.8 x 28 in. | 47.3 x 52.8 x 71 cm
Chamber Volume	45 Liter | 180 Liter
Split Inner Door	6 Compartments (180HDO2 Model ONLY)
Chamber Material	Stainless Steel
Exterior Dimensions 45 L  (W x D x H)	16.5 x 18.3 x 21.8 in. | 42 x 46.5 x 55.3 cm
Exterior Dimensions 180 L (W x D x H)	22 x 26.2 x 37.2 in. | 56 x 66.5 x 94.5 cm
Weight 45 L	77 lbs | 35 kg
Weight 180 L	172 lbs | 78 kg
Electrical	120 V or 230 V,  50-60 Hz
Power Consumption	300W (H3565-45) | 420W (H3565-180) | 700W (H3565-180HD) & (H3565-180HDO2)
Warranty	2 years

 
 
Microscope Specifications 

Magnification	200X
Field of View	1 x 1 mm
Resolution	2 µm
Image Format	5MP (2592 x 1944 pixels)
Video Format	MPEG-4, up to 1296 x 972 10 FPS
Sample Vessels	clear flasks, dishes, plates <8 mm thick
Optics	Brightfield or darkfield
Sensor	CMOS
Electrical	5 V (powered by internal micro-USB)

 

CelCulture® CO2 Incubators

• Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
• Direct heat & air jacket design with gentle yet effective forced convection.
• Intuitive interfaces and intelligent data and event logger.

The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.

Key Benefits

• CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
• SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
• All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
• The incubator's main body is made from electro-galvanized steel with Esco's unique ISOCIDE™ antimicrobial coating.
• SwiftCon™ moist heat 90°C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
• CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
• CO2 tank depletion reminder in addition to CO2 tank-low alarm.
• ULPA-reminder will alert user to replace ULPA filter

VivoCell™ Precise Temperature, CO2 Control and High Humidity

• Best uniformity and control among available CO2 Incubators
• Fast CO2, temperature, and humidity recovery without overshoot.
• Direct heat design for rapid recovery, with 8 heaters grouped into 3 zones.
• Air jacket provides isolation against ambient temperature fluctuations.
• Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
• Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.

Easy-to-Clean

• Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
• Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
• Glass door and inner gasket are removable without tools

Specifications

PLUS Models Only

CO2 Incubator

AEOLUS™ CO2/Non-CO2 Compact Incubator Shaker -3mm

•  7” high-res color touch screen with intuitive graphic interface
• Innovative chamber design features smooth rounded internal corners for easy cleaning
• Infra-Red (IR) CO2 sensor for precise and reliable CO2 detection
• Optional WiFi and RS485 control
• UV lights for easy sterilization
• Audible and visual alarms
• Mirror finish, pharmaceutical grade stainless steel chamber
• Stackable design up to 3 units
• Also available in 25mm and 50mm orbit models
• Able to Stack with 25 and 50mm Orbit Models

SHEL LAB CO2 Water-Jacketed

Standard Design Features:

• Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
• Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
• Humidity levels, maintained through evaporation, of up to 95%
• Data logging capabilities
• Designed to minimize contamination; includes:
• Patented copper-caged HEPA filter
• Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
• Durable stainless steel chamber with coved corners for easy cleaning
• Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
• Copper shelving option
• Autoclavable shelving system
• Industry best warranty  5 years parts and labor in the USA, 7 years on the IR sensor

Series CB | CO2 Incubators with Hot Air Sterilization and Heat Sterilizable CO2 Sensor

• Maximum usable space with minimal footprint and excellent ease of use
• Minimum risk of contamination thanks to uncompromising hot-air sterilization
• Fanless, easy-to-clean hygienic interior
• Stable pH values thanks to drift-free CO2 IR sensor technology
• Low evaporation of the medium due to high levels of humidity and quick recovery time

Main Features

• Temperature range: from +4 °C above ambient temperature up to +60 °C
• Humidity range: up to 95% RH
• O2control range: 0.2 to 20 vol% O2 for versions with O2 control
• Auto-sterilization with hot air at +180 °C
• Double-pane humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• Hot air sterilizable CO2 sensor with infrared technology
• Intuitive touchscreen controller
• Internal data logger, measured values can be read out in open format via USB
• Lockable door handle
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• 3 perforated stainless-steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact

The BINDER CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO2 incubator can perform complex cultivation experiments as well as specific environmental conditions.

CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor
The Binder CB series is a world first! Fitted with a sterilizable CO2 sensor, the incubator meets the highest of standards when it comes to sample safety and cell growth. While C series CO2 incubators have been designed with standard laboratory applications in mind, the BINDER CB comes highly recommended for the incubation of delicate cells, providing optimum growth conditions for cell cultures.

Just like the C series units, the CO2 incubators in the CB series have the option of automatic sterilization with hot air at 180 °C. Plus, they have a heat sterilizable CO2 sensor with infrared technology and come with a double-pan humidification system with condensation protection. The units feature tightly sealed inner doors made of tempered safety glass and a lockable door handle, guaranteeing maximum safety conditions for work in the laboratory.

CO2 incubators with a patented humidity management system
CB series CO2 incubators have a patented humidity management system. The Permadry double-pan humidity system provides active humidity limitation that keeps even the interior walls dry. What's more, evaporation is kept to a minimum thanks to the high humidity.

These CO2 incubators are incredibly user-friendly, with the option to control all of the key parameters at once using the operating panel. Measured values are recorded continually and can be exported as data sets with ease via USB. Navigation is straightforward and intuitive.

The CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor are ideal for the incubation of delicate cells, guaranteeing optimum conditions for cell cultures along with high levels of safety and usability.