|◀ 61 - 72 of 118 ▶|
View:

AbsorbMax Black Vinyl Sealing Film

AbsorbMax is a black vinyl sealing film for black microplaes that can be applied to either the top or bottom of the plate.

  • Minimizes background fluorescence and cross talk between plate wells
  • Ideal as a back seal for black plates with clear well bottoms for top reading measurements
  • Absorbs stray light, reducing the background caused by light scatter
  • Protects light sensitive samples from degradation
  • Features a single split liner for easy application

Applications

  • Fluorescence assays
  • Light sensitive sample protection

Temp. Range

  • -40°C to +80°C

Proudly made in the USA! Click here for more made in America products!
 

BrightMax Sealing Film

White, light-reflecting, vinyl sealing film designed for use with white microplates.

  • The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
  • Maximizes intensity and signal-to-noise ratios in luminescence assays
  • May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
  • Features a single split liner for easy application

Applications

  • Luminescence
  • Fluorescence
  • Microscopy
Temp. Range
  • -40°C to +80°C

Proudly made in the USA! Click here for more made in America products!
 

Plate-Sealing Roller

Application: Plate-sealing

Material:
Rubber, metal

The plate-sealing roller features a smooth spinning, thermoplastic elastomer sealing surface with a durable plated metal handle.

  • Reusable, autoclavable
  • Provides a large 4 inch (10.16 cm) wide sealing surface
  • A 10 minute or greater dwell me at room temperature before processing increases the film-to-plate bond

Proudly made in the USA! Click here for more made in America products!
 


ILP PCR Tubes Strips and Caps

 

Precision-molded PCR tubes and strips for accurate, efficient, and contamination-free amplification.

 

ILP’s line of PCR tubes, 8-tube strips, and attached cap configurations are engineered for high performance in both traditional PCR and quantitative PCR (qPCR) applications. Whether you’re working with low or medium throughput, our PCR consumables deliver consistent thermal transfer, minimal evaporation, and high sample integrity across every experiment. Supplied in resealable bags for convenience and contamination control.

 

Key Features

 

  • Design
    • Thin, consistent wall thickness for uniform heat transfer
    • Compatible with heated lids and older thermal cyclers
    • Flat caps include frosted surfaces for labeling
    • Optically clear flat caps provide superior light transmission for qPCR
  • Evaporation Control
    • Precision-molded as one piece for tight sealing
    • Cap flanges create a secure fit and minimize sample loss
    • Designed to reduce evaporation to under 3% in quality tests
    • Domed caps assist condensation to re-enter the reaction mix and improve heat contact
  • qPCR-Optimized Options
    • Optically clear flat caps ensure reliable fluorescence and luminescence detection
    • Excellent light transmittance for consistent qPCR performance
  • Construction & Material
    • Molded from ultra-clear, virgin, medical-grade polypropylene
    • Durable yet flexible strip bands resist breakage but are easily cut into individual tubes or smaller sections
    • Cap strips include end tabs and orientation labels for easy handling
  • Contamination-Free Assurance
    • Non-sterile
    • Certified free of detectable RNase, DNase, DNA, and pyrogens
  • Recommended Applications
    • Conventional PCR
    • Real-Time qPCR
    • Fluorescence & luminescence assays
    • Low to medium throughput molecular biology workflows

Whether you need individual tubes for flexibility or tube strips for efficiency, ILP PCR products are designed for maximum yield, precision, and ease of use in every amplification cycle.

 

Specifications
 
Overall Vol.300 uL
Working Vol.< 200 uL
 

Item#:
ASPCRTUBESSI

Adjustable Well Plate Stand

Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt). The stand takes up little benchtop space measuring only 6 x 4.5 x 2.5 In. (D x W x H).

*Well Orienters are sold separately.
 

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASWELLPLATESTAND


Multi-colored 96 Well Orienter

 

For easy identification of samples in microplates, vertically or horizontally oriented bright colors make it easy to distinguish between columns. Fits most standard flat and round bottom 96-well plates. Available in horizontal and vertical orientations.
 

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASCHROMPLACC2
Discontinued, Contact us for more options!


This item has been discontinued.

Check out our other Sealing Films for more options.


ELISA and Short Term Sealing Film

The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates. This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage. The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.

For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.

Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

Specifications

Length146.05 mm
Length (w/ end tabs removed)119.05 mm
Width79.38 mm
Overall Thickness3.1 mil
Adhesive Thickness1.1 mil
MaterialPolyester
AdhesiveMedical Grade Acrylic
Max. Temperature120 °C
Min. Temperature-40 °C
Primary UsagesElisa, Storage or Sample Cover
 
Item#:
ASMIDSCIELISA
Bottle-Top Filter, 6/pk
  • The Extractor removes over 99% of the ethidium bromide from gel staining solutions quickly and easily.
  • Each device can decontaminate up to 10 liters of gel staining solution
Item#:
10-448-031
Your Price:
209.65
Each
This item is discontinued

A convenient holder for a microplate, tilted at a 30° angle to comfortably view samples and pipette without strain. Each stand has a neoprene pad and rubber mounting to prevent slippage of the plate and stand.

Item#:
WPST-1000
Your Price:
46.67
Each

Permanently label mutliple microplates with clear Well Orienter Stickers. Each well is clearly marked with its corresponding row number and column letter for easy cross-referencing. The paper backing is scored in the middle allowing for easy aligning on the underside of the plate.

U of M: 50/pack

Layout: 96-well

Description: Made of clear polyester with acrylic adhesive

Item#:
WEST-1000
Your Price:
34.50
Each

U of M: Each

Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt). The stand takes up little benchtop space measuring only 6"L x 4.50"W x 2.50"H.

(Well Orienters are sold separately)

Item#:
WPAJ-1000
Your Price:
96.41
Each

For Easy Pipetting and Identification of Samples in Microplates

A thin, plastic card that slips under the well plate, providing sharp, alpha-numeric characters to identify each sample in a 96-, 48-, or 24-well microplate.

No more cross-referencing headaches!

24-Well Orienter

Format: 24-well
U of M: 4/pack

48-Well Orienter

Format: 48-well
U of M: 4/pack

96-Well Orienter

Format: 96-well
U of M: 4/pack

Item#:
WELL-1000
Your Price:
26.78
Each
|◀ 61 - 72 of 118 ▶|
View: