• Organized and secure storage
• 81-place for 1.5 mL microtubes
• Black, alphanumeric identification
• Removeable insert - accepts crushed ice

MTC Bio's BetterBox™ is an all new autoclavable polypropylene storage box, exclusively designed to hold 81 x 1.5 mL or 2.0 mL microtubes neatly and securely in nine rows of nine tubes (snap cap or screw cap tubes fit equally well). The lid cannot become separated or lost thanks to the sturdy hinge and locking clasp. A frosted marking spot is molded into the front edge and the top surface. Available in a rainbow pack of five colors with clear lids and bases, the actual tube rack (colored middle layer) can be snapped out, allowing the base to be easily filled with crushed ice or liquid. The BetterBox™ is made of autoclavable virgin polypropylene and is freezable to -80° C. The special corner feet are designed to mate with the four grooves in the top of the lid making them interlock and exceptionally easy to stack and transport.

Dimensions: 150 x 160 x 54mm (W x L x H).

Wire, polypropylene, and NEW polystyrene racks 

Select among our three one-well racks--epoxy-coated steel wire racks, interlocking polypropylene racks, or friction-fit polystyrene racks. Move our wire and friction-fit racks to exactly where you need your tube. Friction-fit racks securely hold conical or round bottom tubes with 27.5 to 29mm OD. Link the interlocking plastic racks to form a line of 50mL tubes. Both the wire and interlocking polypropylene racks are autoclavable. Interlocking plastic racks are sold in assorted color packs of one each of blue, green, yellow, pink, and orange.

Polycarbonate Cryo or Freezer Boxes

Polycarbonate boxes will fit all your needs:

• Fit all the most popular cryo and cold storage vials.
• Fit into standard freezer racks.
• Boxes have clear lids with locator grid to facilitate sample identification.
• Withstand temperature extremes of -196°C to 121°C.
• Drain holes for venting and safety.
• Keyed lid prevents misalignment of grid.

32 Flipper® Junior -WF-32C

Features

• Perfect for sequencing.
• Side A: 32 wells for 0.5 mL type tubes with 8 larger positions for 1.5 or 2.0 mL tubes.
• Side B: 32 positions for 1.5 mL or 2.0 mL tubes with 8 smaller positions.

96 Flipper® -FL-96*-5**

Features

• 8 rows x 12 columns with molded indexing .
• Operating Temperature Range: -90 to 121°C.
• Lids are available in clear.
• The perfect partner for PCR prep.
• Side A: 96 x 1.5/2.0 mL.
• Side B: 96 x 0.5 mL.
• Comes in varying colors

Adapt-a-Rack 
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firmly in an upright position. The design enables you to hold 12mm to 30 mm (15 to 50mL tubes) simultaneously and still allow full viewing of the tube label.

• Racks can be linked together for additional holding capacity
• Open sides allow for label viewing
• Flat base to hold tubes upright
• Linked racks should be supported when carrying
• Single rack measures 181x56x76mm, two racks per pack
• Autoclavable

24-Place & 48-Place Microtube Storage Racks

• Hold 1.5 mL, 1.7 mL, and 2.0 mL microtubes
• Freezable (-190°C) and autoclavable (122°C)
• Racks float in water baths

Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5 mL and 2.0 mL tubes. These racks fit into Labcon pipette tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can incorporate dry ice for use with frozen samples on the bench.
 

Cube Rack, Assorted Colors

CoolSafe Specialty chambers are ideal for ice pans, ice buckets and cold or hot plates. These do not fit the CoolSafe Systems. Freeze these chambers overnight for added cooling convenience.

Multiple Uses - Ideal for use on hot or cold plates or for temperature sensitive liquid transfers.

Ideally Sized - A variety of options are available to accommodate PCR tubes and trays, 1.5, 15 and 50 ml conical tubes.

PR-40

• Four angled compartments hold pipettes securely
• Notched shelves allow easy access to shorter pipettes
• Durable ¼-inch acrylic construction
• Flat top for additional storage of pipettors, tips, etc.
• Non-skid rubber feet
• Overall Dimension: 11.75"D x 3.75"W x 16"H
• Compartment Dimensions: 11.5"D x 3.25"W x 3"H

PR-42

• Same features as the PR-40 but twice as big
• Overall Dimension: 11.75"D x 7"W x 16"H
• Compartment Dimensions: 11.5"D x 6.5"W x 3"H

96-Place Reversible Microtube Storage Racks

• Holds 0.5 mL microtubes on one side or 1.5, 1.7, 2.0 mL microtubes on reverse side
• Made of polypropylene
• Autoclavable (122°C) and freezable (-80°C)

Labcon 96-Place Racks and Storage Boxes. These are for use with 0.5mL, 1.7mL and 2.0mL micro centrifuge tubes and 2.0mL cryo- vials. These double-sided racks hold 1.7mL and 2.0mL tubes on one side and 0.5mL on the reverse side. Rack and clear lid are fully autoclavable (122°C) and freezable
(-80°C). Made of polypropylene.