S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
PCR/qPCR
MIDSCI can supply almost every needed product for PCR/qPCR: tubes, plates, strips, caps, taq, Mastermixes, dNPTs, dye and probe for qPCR, sealing film and much more. If you are looking for any of these things, we can match almost all needs to all cyclers. If you don’t find it easily contact us at tech@midsci.com and we will find it for you.
96 or 384 we have it. Non-Skirted, semi-skirted or full skirted, we have it. 0.1, 0.2, or 0.5 mL we have it. A1, A12, H12, A24, P24 cuts, we have them. Sybr© Green or probe alternative, we have it.
Pro Tip: Colored plastics do not have any impact on DNA amplification. But when setting up qPCR it is often recommended to use white plastics. This will limit or prevent fluorescence refraction. Light refraction can minimize sensitivity and consistency.
Pro Tip 2: If you are seeing inconsistencies in PCR/qPCR try PR1MA Pipette Tips. This will help optimize and reduce variance in the reactions. Simple test, see the residual liquid left in tips? This means some of the taq, dNTPs, sample, etc is left in the tip. PR1MA tips help reduce that significantly and improve your consistency.
Pro Tip 3: Seeing evaporation in the outer wells of a PCR/qPCR plate? Sometimes it’s the plate, sometimes it the seal, and sometimes it’s the cycler. Call us we have solutions.
Hoefer® Submarine Gel Electrophoresis Systems
- Color-coded and height-adjustable combs easily identify comb thickness at a glance and control well depth
- Colored loading strips - for easy well detection when loading
- UV-transparent running tray allows user to image gel without risk of damage due to handling
- Buffer recirculation ports may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation (*Not included for SUB6 and SUB10)
- Includes
- Buffer Chamber Assembly, 1/ea
- Safety Lid, 1/ea
- High Voltage Leads, 1/ea
- Colored Loading Strips, 1/ea
- Buffer Recirculation Ports, 2/pk (*Not included for SUB6 and SUB10)
- Running Tray, 1/ea
- Combs, 1/ea
Mini (SUB6), Mini+ (SUB10) and Midi (SUB13) Submarine Gel Electrophoresis Systems
The SUB6 and SUB10 are ideal for routine nucleic acid preparatory and analytical electrophoresis techniques. SUB13 Midi is ideal for analytical and preparative studies of nucleic acids. Maximum of 32-sample (SUB6), 80-sample (SUB10), or 112-sample (SUB13) throughput capacity and features a removable gel-casting tray with end gaskets that allow gels to be cast directly within the tank.
- Compact tank reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time
- Side handles for safe and easy transportation around the laboratory
- Includes
- Running Tray with Silicone Gasket*
- 1 mm thick, 8-well combs, 2/pk (SUB6 Only)
- 1 mm thick, 16-well combs, 2/pk (SUB10 and SUB13 Only)
*The included running tray is lined with silicone gaskets, which form a leak-proof seal against the inner walls of the running chamber when the running tray is turned 90° to the direction of electrophoresis.
Standard (SUB15) Submarine Gel Electrophoresis System
Provides the most commonly used tray size and comb options. Highly versatile option for screening nucleic acid samples ranging from DNA mini-preps to PCR products. 120-sample maximum throughput.
- The market standard - a 15 x 15 cm gel tray, with comb options ranging from 1 to 30 samples
- Multi-channel pipette compatible combs with a maximum 30 sample throughput reduce gel loading time, while preparatory combs enable nucleic acids to be scaled up for cloning
- Side handles for safe and easy transportation around the laboratory
- Includes
- Running Tray with Casting Gates*
- 1 mm thick, 16-well combs, 2/pk
*The included casting gates conveniently and efficiently seal the running tray without the hassles of using tape.
High Throughput (SUBHT) Submarine Gel Electrophoresis System
Ideal for high throughput screening applications like single strand polymorphism (SSP) analysis following PCR. This horizontal gel unit can resolve DNA strands from 50 – 1000 base pairs in 30 minutes and accommodate up to 120 samples (96-well plate + 24 control and/or marker samples).
- Fast, error-free loading - Load an entire 96-well plate using a multichannel pipette
- Simplified analysis - Fluorescent labels for each sample printed on a UV transparent gel tray allows for instant sample identification (matched to a 96-well plate) during post-run visualization
- Eliminate variability caused by running buffer pH drift and ionic gradient formation with optional buffer recirculation capability
- Compact tank design needs less buffer to cover gel which not only reduces buffer consumption but provides greater control of voltage gradients and run times
- Fully compatible with a wide range of combs and accessories to meet all your high throughput and standard gel analysis needs
- Includes
- Fluorescent Labeled Running Tray with Casting Gates
- 1 mm thick, 30 well combs, 4/pk
Maxi-Standard (SUB20) and Maxi-Cooled (SUB20C) Submarine Gel Electrophoresis Systems
20 x 20 cm gel-running tray with four comb positions, which allows the user to perform high-resolution analytical and preparative studies of nucleic acids. Handles up to 168 samples.
- Multichannel pipette compatible combs with a maximum 40 sample throughput reduces gel loading time
- Side handles for safe and easy transportation around the laboratory
- Includes
- Buffer Chamber Assembly with Cooling Ports (SUB20C Only)
- Running Tray with Casting Gates
- 1 mm thick, 16 well combs, 2/pk
*The included casting gates conveniently and efficiently seal the running tray without the hassles of using tape.
Maxi-Plus Standard (SUB25) and Maxi-Plus Cooled (SUB25C) Submarine Gel Electrophoresis Systems
Ideal for high-throughput screening of nucleic acids, particularly PCR products, and in genotyping studies. It has a 25 x 30 cm gel-running tray with 12 comb positions accommodating a maximum throughput of 624 samples.
- Multichannel pipette compatible combs—with a maximum 52 sample throughput, reduce gel loading time
- Side handles—for safe and easy transportation around the laboratory
- Includes
- Buffer Chamber Assembly with Cooling Ports (SUB25C Only)
- Running Tray w/Casting Gates
- 1 mm thick, 26 well combs, 6/pk
Hoefer® Tall Air-Cool Vertical Electrophoresis System
Compact, rugged, and economical units ideal for educational laboratories with multiple users.
- Maximum glass plate size 18 x 24 cm
- Rugged injection molded construction is durable and assembles easily
- Run two gels with the addition of a divider plate
- Built-in casting stand seals leak free
- Choose from a wide variety of accessories
- Plates, clamps, spacers, and combs are interchangeable with the SE600 Series
Hoefer® Tall Air-Cool Complete Unit (SE410-15-15)
- Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
- Upper Buffer Chamber, 1/ea
- Safety Lid with Electrodes, 1/ea
- Glass Plates, 18 x 24 cm, 2/pk
- Clamp Assemblies, 8 cm, 2/pk
- Clamp Assemblies, 16 cm, 2/pk
- Cams, 2/pk
- Slotted Gasket for Upper Buffer Chamber, 1/ea
- Bubble Level, 1/ea
- Laminated Gasket for Casting Stand, 1/ea
- Spacer-Mate Alignment Template, 1/ea
- Wonder Wedge-Plate Separation Tool, 1/ea
- Gel Seal, 1/ea
- Comb, 15-well, 1.5 mm thick, 1/ea
- Spacers, 1.5 mm thick, 2 cm wide, 2/pk
Hoefer® Tall Air-Cool Basic Unit (SE410)
The same as above without the combs and spacers. Order one SE511 comb and one set of 24 cm long spacers separately.
Specifications
Plate Size (W x H) | 7.09 x 9.45 In. | 18 x 24 cm |
Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
Max. Power | 500 V, 60 mA, 20 W |
Max. Temp. | 113ºF | 45°C |
Indoor Use | 39.2 to 104ºF | 4 to 40°C |
Humidity | Up to 80% |
Dims (D x W x H) | 5.91 x 9.45 x 14.19 In. | 15 x 24 x 36 cm |
Weight | 7.94 lb | 3.60 kg |
Hoefer® Mighty Small II Mini Vertical Electrophoresis System
Designed for quick screening and rapid separation.
- Maximum glass plate size 10 x 8 cm
- Efficient active cooling ensures sharp bands
- Quick and easy to assemble
- Requires minimal buffer
Easily upgradable to the SE260 (with optional accessories), resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels, enabling a wider variety of precast gel options.
Hoefer® Mighty Small II Complete Units (SE250-10A)
- Lower Buffer Chamber, 1/ea
- Upper Buffer Chamber with Cooling Core, 1/ea
- Safety Lid with High Voltage Leads, 1/ea
- Casting Cradle with Sealing Gasket Set, 1/ea
- Casting Clamp Assemblies, 2/ea
- Cams, 4/ea
- Glass Plates, Rectangular, 10 x 8 cm, 10/ea
- Alumina Plates, Notched, 10 x 8 cm, 2/ea
- Spring Clamps, 4/ea
- Combs, 10 well, 2/ea
- T-Spacers, 4/ea
- Well Locating Decals, 2/ea
- Gel Seal, 1/ea
Hoefer® Mighty Small II Basic Unit (SE250)
The same as above without the combs, spacers, and caster. For use with precast gels or order two SE211A combs, two sets of 8 cm long T-spacers, 10 x 8 cm rectangular glass and notched alumina plates, and a gel caster.Specifications
Plate Size (W x H) | 3.34 x 3.15 In. | 10 x 8 cm |
Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
Max. Power | 500 V, 500 mA, 12 W |
Max. Temp. | 113ºF | 45°C |
Indoor Use | 39.2 to 104ºC | 4 to 40°C |
Humidity | Up to 80% |
Dims (D x W x H) | 6.30 x 6.50 x 6.30 In. | 16 x 16.5 x 16 cm |
Weight | 3.30 lb | 1.50 kg |
Hoefer® Air-Cooled Vertical Electrophoresis System
Compact, rugged, and economical units ideal for educational laboratories with multiple users.
- Maximum glass plate size 18 x 16 cm
- Rugged injection molded construction is durable and assembles easily
- Run two gels with the addition of a divider plate
- Built-in casting stand seals leak free
- Choose from a wide variety of accessories
- Plates, clamps, spacers, and combs are interchangeable with the SE600 Series
Hoefer® Air-Cooled Complete Unit (SE400-15-15)
- Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
- Upper Buffer Chamber, 1/ea
- Safety Lid with Electrodes, 1/ea
- Glass Plates, 18 x 16 cm, 2/pk
- Clamp Assemblies, 16 cm, 2/pk
- Cams, 2/pk
- Slotted Gasket for Upper Buffer Chamber, 1/ea
- Bubble Level, 1/ea
- Laminated Gasket for Casting Stand, 1/ea
- Spacer-Mate-Alignment Template, 1/ea
- Wonder Wedge Plate Separation Tool, 1/ea
- Gel Seal, 1/ea
- Comb, 15-well, 1.5 mm thick, 1/ea
- Spacers, 1.5 mm thick, 2 cm wide, 2/pk
Hoefer® Air-Cooled Basic Unit (SE400)
The same as above without the combs and spacers. Order one SE511 comb and one set of 16 cm long spacers separately.
Specifications
Plate Size (W x H) | 7.09 x 6.30 In. | 18 x 16 cm |
Spacers | 0.75 mm, 1.0 mm, 1.5 mm |
Max. Power | 500 V, 60 mA, 20 W |
Max. Temp. | 113ºF | 45°C |
Indoor Use | 39.2 to 104ºF | 4 to 40°C |
Humidity | Up to 80% |
Dims (D x W x H) | 5.91 x 9.45 x 11.02 In. | 15 x 24 x 28 cm |
Weight | 6.83 | 3.10 kg |
Hoefer® Max Horizontal Agarose Electrophoresis System
Offers a variety of gel lengths and comb sizes to enable the design of the gel required for optimum resolution of DNA fragments. Facilitates high-resolution separation of nucleic acid fragments 100 bp to 20 kbp. Three different length trays are available for use with this unit.
- Self-locating/centering guides support consistent running tray placement
- Gel anchor feet prevent the gel from floating or sliding during the run
- A variety of comb sizes enables customization of sample throughput to fit your laboratory's requirements
- Adjustable comb height—complete control over well depth
- Three casting kits available—enabling users to run 15 x 20, 15 x 15, or 15 x 10 cm gels in the same unit
Complete Unit (HE99X-15-15)
- Buffer Chamber Assembly, 1/ea
- Safety Lid with High Voltage Leads, 1/ea
- Running Tray, 15 x 20 cm, 1/ea
- Casting Tray, 15 x 20 cm, 1/ea
- Foam Gaskets, 4/pk
- Bubble Level, 1/ea
- 1.5 mm thick, 15-well comb, 1/ea
- Comb Back, 1/ea
Basic Unit (HE99X)
The same as above, without the Running Tray, Casting Tray, Comb, and Comb Back. Order a casting kit, combs, and comb backs separately.
Specifications
Gel Dims (W x L) | 5.91 x 7.87 | 5.91 x 5.91 | 5.91 x 3.94 In. 15 x 20 | 15 x 15 | 15 x 10 cm |
Max. Buffer Vol. | 1.2 L |
Max. Power | 200 V, 100 mA, 20 W |
Max. Capacity | 60 Samples |
Max. Temp. | 113ºF | 45°C |
Indoor Use | 39.2 to 104ºF | 4 to 40°C |
Humidity | Up to 80% |
Dims (D x W x H) | 14.17 x 7.17 x 5.51 In. | 36 x 18.2 x 14 cm |
MyView™ Compact UV Transilluminator
- Uniform Illumination | Four 302 nm Bulbs
- Adjustable UV Safety Cover | Easy Access to Gels
- Large Scratch Resistant Viewing | 16.5 x 13.5 cm
The E3100 Compact UV Transilluminator has a surprisingly small footprint (just over 12 x 8 In.) yet provides industry leading performance. It will accommodate one or two mini gels on the 16.5 x 13.5 cm scratch resistant viewing surface.
The integrated UV blocking cover is made from a polymer that will not fluoresce in UV light. This allows clear viewing of DNA bands through the cover yet offers full UV blocking protection. Two friction hinges on the front edge of the cover allow for full adjustment. Position the cover horizontally for general viewing, tilt it at an angle for gel access and band cutting, or open fully to use the SmartDoc™ Imaging Enclosure (sold separately) for gel imaging with a smartphone.
The transilluminator’s four 6W bulbs evenly illuminate the viewing surface, and the 302 nm wavelength is ideal for Ethidium Bromide, SmartGlow™, SYBR Green®, Gel Green™ and many other common gel stains. Spacing of the UV bulbs, coupled with a reflector system and special diffusing filter glass provides exceptional uniformity across the viewing surface. This allows for quantification of DNA and higher quality imaging when used with a camera system.
Specifications
Light source 4 x 6W UV Light Bulbs | 4 x 6W UV Light Bulbs |
Safety cover UV blocking polycarbonate | UV blocking polycarbonate |
Exterior dimensions | 10 x 8 x 2.75 In. | 25.4 x 20.32 x 6.99 cm |
Electrical | 12VDC (AC power adapter included) |
Output wavelength | Peak at 302 nm |
Viewing surface | 6.5 x 5.3 In. | 16.5 x 13.5 cm |
Weight | 2 lbs. | 0.9 kg. |
Warranty | 2 years |
Item # E3100 is proudly made in the USA! Click here for more made in America products!
Accuris Fast Extraction PCR Kit
The Accuris Fast Extraction PCR Kit features an exclusive single-tube solution that extracts genomic DNA in just 8 minutes. This is swiftly followed by PCR amplification utilizing our High Fidelity Hot Start Red Dye Master Mix, designed for superior endpoint PCR performance. High Fidelity Hot Start Red Dye Master Mix is a 2X formula that incorporates a non-reactive red dye, enabling direct gel loading.
This kit offers versatility to suit different workflows: the PCR-prepared genomic DNA can be directly used in endpoint PCR or can be applied in real-time PCR using either SYBR Green or TaqMan Probe chemistries.
- Offers exceptional versatility and can be used to extract and amplify DNA from a wide range of sample types
- Compatible with animal tissue, plant, saliva, & bacterial samples
- Extraction & Amplification in less than 60 minutes
- Includes High Fidelity Hot Start Red Dye Master Mix to prevent the risk of nonspecific amplification & to visualize bands easily
- Process extracted sample via PCR with included mastermix
- Alternatively, amplify via qPCR (qPCR mastermix not included)
Each 100 reaction kit includes:
1 tube of High Fidelity Hot Start Red Dye Master Mix (1.25 mL)
1 tube of Fast Extraction Lysis Solution (1.25 mL)
Applications: Extraction & Amplification of Tissue, Plant, Saliva, & Bacteria
Proudly made in the USA! Click here for more made in America products!
Accuris SmartBlue™ Transilluminators
Accuris SmartBlue™ Transilluminators have been developed for viewing DNA gels stained with new, safe fluorescent dyes. These new dyes, such as SmartGlow™, SYBR Green, Gel Green, have an excitation wavelength of 465-470 nm (visible blue light), and are safer to use than Ethidium Bromide.
- Blue light, safe for nucleic acids
- Uniform illumination (UI Technology)
- Optimal wavelength (465nm) for common safe stains
- Adjustable position, amber filter covers
- Optional amber viewing glasses: E4000-VG1
Safer for samples, safer for you: Accuris SmartBlue™ Transilluminators are the perfect partner for the most common safe DNA stains. These instruments emit blue light at a wavelength of 465 nm, perfect for excitation of most green fluorophors, including our Accuris’ SmartGlow™, SYBR Green, SYBR Safe, SYBR Gold, GelStar, GelGreen, to name a few. SmartBlue™ transilluminators can also work for excitation of EtBr (though fluorescence is not as bright as with UV), see our Technical Bulletin with sample images. Exposing DNA to blue wavelength does not cause molecular damage, and results in a much higher downstream cloning efficiency as compared to even short UV light exposures. In addition, the visible blue light is not damaging to the user’s skin and is less harmful to the eyes.*
Adjustable filter cover: Both the E4101 and SB4500 transilluminators come with emission filter covers. These amber covers, which rest above the viewing surface and gel, filter out the blue light, allowing the fluorescing DNA bands to be seen clearly. The covers can be set to a flat position for general gel viewing or can be set at an angle to provide easy access to the gel for band excision. The SB4500 has a two-position filter cover, and the E4101 features a hinged filter cover.
Optional amber viewing glasses: Our E4000-VG1 SmartBlue™ Plus Viewing Glasses offer efficient blocking of the blue light wavelength from the transilluminators, allowing clear visualization of the fluorescing DNA bands without the filter cover in place. These convenient glasses are recommended for users that are frequently excising DNA bands from gels. SmartBlue™ Plus glasses also block 100% of UV wavelength so they can also be used for viewing gels on a UV transilluminator.
UI technology, bright and clear images: The bright LED light plates and filter layer provides an extremely evenly lit viewing surface. Even in ambient light, bands of DNA can clearly be seen in stained gels. Images obtained using the SmartBlue™ Transilluminator are brighter and more balanced than those obtained using epi-illuminators which light from the sides.
Reliable, durable, and long-lasting: An array of super bright LEDs with a long, 30,000 hour service life provide the light source for the SmartBlue™ Transilluminators. Unlike those in a UV transilluminator, the filters in the SmartBlue™ systems will not solarize and degrade in performance over time. Gel bands can be excised directly on the scratch resistant, glass viewing surfaces. To save energy, the power switch includes an automatic 5 minute shutoff. SmartBlue™ Transilluminators are covered by a 2 year warranty.
* SmartBlue™ products use high intensity LED lights. Although the visible blue wavelength is significantly safer than UV light, it is recommended to not stare directly at the viewing surface without the amber cover in place.
Specifications
Light Source | High Intensity Blue LEDs |
Emission Filter Cover | Amber |
Wavelength | Peak at 465 nm |
E4000 Viewing Surface | 17 x 12 cm |
E4000 Ext. Dimensions | 30.5 x 21.5 x 5 cm |
E4101 Viewing Surface | 10.5 x 10.5 cm |
E4101 Ext. Dimensions | 17 x 12 x 5 cm |
Electrical | 100 to 240V, 50-60Hz |
E4000 Weight | 1.2kg / 2.6lbs |
E4101 Weight | 0.34kg / 0.75lbs |
Warranty | 2 years |
Item # SB4500 is proudly made in the USA! Click here for more made in America products!
Accuris qMAX SYBR Green Bulk Packaging
Supplied as a ready-to-use 2X master mix, qMax Green has been engineered for high sensitivity, fast cycling and excellent reproducibility.
- Superior sensitivity and fast cycling with exceptional results.
- Ideal for low copy number templates.
- Early Ct values and detection across a broad dynamic range.
- Ready to use 2x mastermix.
- Includes Accuris Hot Start Taq Polymerase for greater specificity and accuracy.
Please Note:
Low Rox and High Rox formulations are available for compatibility with all brands of qPCR cyclers. Please specify when ordering.
Proudly made in the USA! Click here for more made in America products!
PurePlus® PCR Plates
- PurePlus® plates are tested for RNase/DNase lot by lot to ensure pure product
- Our plates are lot certified free of Human DNA contamination
- Our plates are tested for ATP lot by lot to ensure pure consistent product
- Broad product range. Over 18 styles of plates fit most major thermocyclers
- These plates are autoclavable to 122° C for 15 minutes at 15PSI
Ultra Clear and Ultra Clean
PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using this week. We also test every batch for contamination by Human DNA as well as the more common tests that other suppliers offer for RNase and DNase enzymes. Many of our plates are printed with black alpha numeric reference grids to make it easier for you to keep track of your samples. We also offer optically clear caps and opaque black or white plates for Real Time PCR. And we also offer re-usable silicone sealing mats and polypropylene sealing film. Labcon PurePlus® PCR tubes, strips and plates are designed to fit many popular thermocyclers including brands like Applied Biosystems, Eppendorf, Thermo Scientific, and Bio Rad. All our PCR disposables are made from 100% virgin polypropylene and are lot tested and certified to be free of RNase, DNase, and Human DNA. Autoclavable. Our pure resin consumables are available in strips, individual tubes, plates in clear natural or colors.PurePlus® sterile disposables, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" products from other suppliers you can use PurePlus® PCR disposables for diagnostic and regulated procedures.
Proudly made in the USA! Click here for more made in America products!
Adjustable Well Plate Stand
Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt). The stand takes up little benchtop space measuring only 6 x 4.5 x 2.5 In. (D x W x H).
*Well Orienters are sold separately.Proudly made in the USA! Click here for more made in America products!
2025 LabValues Promotion!For a limited time enjoy discounted pricing on theENDURO™ Power Supply Series (E0303 and E0203)!
Special price applies only to the specified item; no substitutions.
Cannot be combined with other discounts or pricing. Not valid on prior purchases.
Promo is valid 01/06/2025 – 06/30/2025 or while supplies last.
All terms and conditions apply.
ENDURO™ Power Supply
- Two models (300V and 250V) available
- For DNA, RNA, or protein electrophoresis, and blotting applications
- Constant voltage or constant current with automatic crossover
- 250 V model also offers a constant power operating mode
- Timed or continuous operation
- Short circuit and over current/ over voltage protection
- No load and load change detection system
- Programming includes option for automatic recovery after power failure
- 3 year warranty
The new Enduro™ Power Supplies meet a wide range of applications including DNA, RNA, and protein electrophoresis, blotting, and many others. Two models are available with voltage ranges to 300 V and current ranges to 3000 mA. Operating modes include constant voltage or constant current with automatic crossover. In addition, the 250V model offers a constant power operating mode.
All parameters, including voltage, current, power (250 V model only), and time are easily set using the membrane keypad and displayed digitally on the back lit LCD. Compact in design with a small footprint, the Enduro™ Power Supplies are also stackable to save space. For easy viewing and setting of parameters on the bench or on a shelf, the front of the power supply can be raised with the integral folding feet.
Specifications
Model | 300V | 250V |
Output Voltage Range/Increments | 2-300V/1V | 5-250V/1V |
Output Current Range/Increments | 4-500mA/1mA | 10-3000mA/10mA |
Output Power Range/Increments | 90 watts max/n.a. | 1-300W/1W |
Operating Constant Modes | current or voltage | current, voltage, or power |
Timer | 1 -99 min, or continuous | 1min. to 99h 59min or continuous |
Programmable | no | Yes (20 program capacity) |
Dimensions (W x D x H) | 19 x 25 x 8 cm | 19 x 25 x 8 cm |
Weight | 2.6 lbs | 5.7 lbs |
Input Voltage | 110-230 V | 110-230 V |