myGel InstaView™ System | Complete System with Power Supply

• View DNA migration and separation as it happens
• Blue light illumination - won't damage DNA
• Capture high-resolution images without removing the gel from the tank

The myGel InstaView^™ comes complete with everything needed to cast, run, and view mini electrophoresis gels, including an integrated power supply. One large (10.5 x 10 cm) or small (10.5 x 6 cm) gel is accommodated by the gel tank. Gels are easily poured using the supplied trays, combs, and leak-proof casting stand. The power supply connects directly to the gel tank – no more leads to contend with. The connection is guaranteed to be right, every time.

Output voltage can be adjusted to 35V, 50V, or 100V and run time can be set for up to 99 minutes. A magnetic interlock between the gel tank and the lid prevents current from running through the system when the lid is not properly in place.

Once the myGel InstaView System is set up, simply slide the mini LED transilluminator into place under the tank and at any time turn it on to view the run in real-time. An array of blue LEDs emits bright blue light at a wavelength of 465 nm for optimal excitation of common green fluorescent stains such as SmartGlow^™, SYBYR^™ Green, and Gel Green, without damaging DNA. An orange filter is incorporated into the lid for visualizing DNA bands without any additional equipment or special glasses. When it’s time to document results, place the included gel imaging enclosure over top of the myGel InstaView, and use the camera app on any smartphone to capture high-resolution images without removing the gel from the tank.

Images are easily shared via email or text message or printed.
 

Specifications

InstaView Gel Tank

For labs that prefer to use a separate power supply, the InstaView Gel Tank is the perfect choice for running, viewing, and documenting electrophoretic separations. The InstaView Gel Tank accommodates one large (10.5 x 10 cm) or one small (10.5 x 6 cm) gel tray and is supplied with trays, combs, and a leak-proof casting stand. The gel tank lid includes attached power leads which prevent the unit from operating without the lid properly in place.

Any standard power supply can be connected, including the Accuris myVolt^™ Mini and myVolt Touch. The InstaView Gel Tank is shaped to allow the mini-LED transilluminator (included) to slide underneath. Blue light, at a wavelength of 465 nm, provides excitation of common green fluorescent stains such as SmartGlow^™, SYBR^™ Green, and GelGreen. An orange filter is incorporated into the gel tank lid for visualizing the DNA in the gel box without any additional equipment or glasses. The transilluminator can be turned on at any time during a run to track progress and automatically shuts off after 5 minutes.

After electrophoresis, simply place the included imaging enclosure over the InstaView Gel Tank to capture high-resolution images with a smartphone. Images are easily printed or shared via email or text message.

Specifications 

Safety	Physical interlock between lid and tank
Buffer Volume	230 mL
Gel Capacity	1-10.5 x 10 cm or 1-10.5 x 6 cm gels, 0.5 cm thick
Transilluminator	Blue LED, 465 nm
WxDxH (w/enclosure)	7.5 x 8.25 x 5 in /19 x 21 x 14 cm
Weight	1.65lb/0.75kg
Electrical	115V, 60Hz or 230V, 50Hz
Warranty	2-year

  

System & Accessories

StripSpin 12 Mini Centrifuge has been discontinued. A replacement model (C2248) can be found here.

StripSpin 12 Mini Centrifuge

• Unique rotor for 12-strip PCR tubes
• Also can be used with 8-strip and individual PCR tubes
• Starts and Stops with opening/closing the lid
• Tiny benchtop footprint and affordability
• Place a StripSpin at the bench, thermal cycler & water bath for convenience.

Specifications:

Specifications

 
The SmartBlue™ Blue Light Transilluminator is the smart alternative to UV transillumination. The uniform 465 nm bottom lighting illumination is perfect for excitation of most green fluorophores without damaging the DNA, thus resulting in a much higher downstream cloning efficiency. Furthermore, the two position filter cover position allows for easy access to the gel for band excision. Without the need for the use of DNA damaging UV light, you don't have to worry about any damage to the skin and eyes.

Pair with DNA Safe Stain (C138) for the ultimate viewing effectiveness!

A 230V is available upon request (SB4500-E).

Specifications

SmartBlue™ Mini Blue Light Transilluminator

Safer for samples, safer for you: Accuris SmartBlue™ Mini Blue Light Transilluminator is the perfect partner for most common safe DNA stains. It emits blue light at a wavelength of 465nm, perfect for excitation of most green fluorophors, including our Accuris’ SmartGlow™, SYBR Green, SYBR Safe, SYBR Gold, GelStar, GelGreen, to name a few.  The SmartBlue™ Mini also works for excitation of EtBr (though fluorescence is not as bright as with UV), see our Technical Bulletin with sample images. Exposing DNA to blue wavelength does not cause molecular damage, and results in a much higher downstream cloning efficiency as compared to even short UV light exposures.  In addition, the visible blue light is not damaging to the user’s skin and is less harmful to the eyes.*

Two position filter cover:  The E4100 transilluminator comes with an emission filter cover. These amber covers, which rest above the viewing surface and gel, filter out the blue light, allowing the fluorescing DNA bands to be seen clearly.  The covers are designed to fit flat for general gel viewing or to be placed at an angle to provide easy access to the gel for band excision. For documentation, the filter cover is easily removed completely. UI technology, bright and clear images:  The bright LED light plates and filter layer provides an extremely evenly lit viewing surface. Even in ambient light, bands of DNA can clearly be seen in stained gels. Images obtained using the SmartBlue™ Mini Transilluminator are brighter and more balanced than those obtained using epi-illuminators which light from the sides.

Reliable, durable and long lasting:  An array of super bright LEDs with a long, 30,000 hour service life provide the light source for the SmartBlue™ Mini Transilluminator. Unlike those in a UV transilluminator, the filters in the SmartBlue™ Min system will not solarize and degrade in performance over time. Gel bands can be excised directly on the scratch resistant, glass viewing surfaces. To save energy, the power switch includes an automatic 5 minute shutoff. SmartBlue™ Mini Transilluminators are covered by a 2 year warranty.

* The SmartBlue™ products use high intensity LED lights.  Although the visible blue wavelength is significantly safer than UV light, it is recommended to not stare directly at the viewing surface without the amber cover in place. 
 
 
Specifications 

Optional SmartBlue™ Plus Viewing Glasses

Accuris SmartBlue™ Plus Viewing Glasses offer exceptional protection for researchers working with bright blue LED and UV light illuminators. The polycarbonate filter lenses are shatter proof, scratch resistant and block light in the UV (280 nm) to blue (490 nm) wavelengths. In addition, they are compliant with ANSI Z87.1.

These glasses are ideal for general protection when working with hazardous wavelengths and for precision DNA band cutting on a UV or blue light transilluminator. While blocking hazardous UV and blue light, the glasses allow clear visualization of DNA bands stained with Ethidium Bromide, SmartGlow™, SYBR Green and other fluorescent dyes. 
 
*Always wear appropriate UV protection for eyes and exposed skin when working with UV light sources 

• Increased ultraviolet output and intensity
• No light flicker
• Wider intensity range with variable selection (select models)
• Fast lamp start up
• Universal power supply
• Reduced electrical consumption
• Longer tube life
• Lighter weight
• Improved gel visualization and gel documentation
• 2 year warranty

Visi-Blue Transilluminators are designed for use with GFP stains. As compared to UV, the blue light will transmit through almost any transparent (plastic, glass, etc.) laboratory equipment. This is essential when monitoring and detecting DNA migration and protein expression in real time.

• Two models are available with surface areas as follows: 21x26cm or 20x40cm
• Select from models with 8-watts or 25-watts
• Amber cover (included) blocks blue light transmission and allows visualization of media above 500nm

Several specially designed converter plates convert a transilluminator's 302nm ultraviolet radiation .

• To white light for viewing protein gels, coomassie blue stained or silver stained media. The Converter Plate's uniquely phosphored glass assembly (patent pending) converts the UV radiation via a white diffuser
• Convert UV:

1. To 460-470nm with the Visi-BlueT plate for viewing GFP stains
2. To 365nm UV with the UV/UV plate for preparation and gel excision

• The scratch-resistant glass is mounted in a metal housing for durability
• Rubber seal stops the plate from sliding
• Handles are situated on two sides of the plate for easy handling
• Several standard plate sizes are available; custom sizes are also available

Enduro™ UV Transilluminators