Home  >  PCR, Protein, RNA, DNA  >  Protein
|◀ ◀ 193 - 202 of 202 ▶ ▶|
View:

Scintillation Vials

High quality scintillation vials available in three sizes to satisfy a range of applications. Designed to provide consistently low background counts and are suitable for low activity counting. The smaller sizes are very economical to use since they require smaller quantities of solvent.

The 20 mL Scintillation Vial has multiple uses in scintillation counting, gamma counting, chromatography, sample storage and culturing. Because of its leak-tight cap it is also commonly used to store and transport histological specimens in 10% formalin. This scintillation vial provides a high degree of resistance to organic solvents and sufficient translucence so that reagent levels can be easily seen. The unique thread design of the closure permits the vial to be sealed tight with an easy 1/4 turn and with minimum pressure.

The 6.5 mL Scintillation Vials are securely sealed by simply snapping the caps on. The cap is conveniently removed with an easy 1/4 turn to the left.

The 4 mL Polyethylene Scintillation Vial uses a full turn polypropylene screw cap. This small volume scintillation vial is the most economical size to use because it requires the least amount of solvent.

Item#:
ASVIALSSCINN

 
96-Deep Well Plate, Round Well, U Bottom 45mm


This 8 mm round well U-bottom plate combines working volume with automation friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

 

  • Uniform wall thickness
  • Easy well identification with molded-in alpha-numeric position markings
  • Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
  • Raised rims help protect from cross contamination

 

Item#:
AS96DPWELRWUBBTM45MM

LTS Style Filtered Pipette Tip


General Features Product Type: Pipet Tips
Number of Wells: 96
Material: Polypropylene
Color: Natural
Alphanumeric: None
Surface Treatment: None
Certified: DNase-/RNase-/Pyrogen-Free
Volumes & Dimensions Working Volume: 10ul
Performance Autoclavable: No
Max Temperature: 120C
Min Temperature: '-40C
Shipping & Handling Quantity: 96 Tips/Rack, 10 Racks/Pack, 5 Packs/Case
Case Dimensions (in.): 19 x 11 x 15.5
Case Weight (lbs.): 20.3
Item#:
ASLTSSTYFLPIPT

NEST 3D Barcode Cryogenic Vials

  • The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards
  • Cap is made of high-density polyethylene (HDPE), so that the vial is recommended to be used in -196°C liquid nitrogen phase
  • DNase/RNase free, non-endotoxin
  • Electron beam sterilization, SAL = 10-6

    • The two-color vial body of an integrated injection molding can realize multi-code tracking, and it can support the traceability of samples and data sharing among multiple users, laboratories and automation, making the warehousing and ex-warehousing of samples more convenient and faster, while ensuring the safety of the sample storage process.


    Three-code-in-one (digital code, barcode, QR code)
    The vial has laser-etched international standard DATAMATRIX 2D code at the bottom.
    The barcode and digital code at the side are anti-fading, anti-deforming, wear proof and resist DMSO and other organic solvents; 100% clear and readable.


    NEST Advantages
  • Low temperature test: -80°C cryogenic freezing test, -196°C liquid nitrogen test
  • Sealing test
  • Sterility test
  • Endotoxin test, DNA and RNA enzyme test


    • The product meets the SBS standard and provides an effective safety guarantee and management for biological sample libraries and other warehouses of various chemicals and biological products stored at low temperatures.

    Item#:
    AD3DBARCCRYVIALS

     
    96-Deep Well Plate, Round Well, U Bottom 45mm, Glass Coated

     

    This 7.20 mm round well U-bottom plate combines a 2.0 mL working volume with an automation-friendly design. Sturdy and warp-resistant design with ultra-flat surfaces and rigid construction, this plate is ideal for high throughput screening, sample collection, compound storage, screening, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks, and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint.

     

    Glass-coated, polypropylene microplates. The 200 nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  

     

    This SiO2 coating helps to:

    • Reduced binding
    • Increase chemical resistance
    • Protect the same from any potential compounds leached from the plastic

    Raised rims on each well help protect from cross-contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
     
    Made from medical grade virgin polypropylene (no mold release agents or regrind); certified RNase, DNase, DNA, and Pyrogen Free.

    Manufactured of inert, chemically resistant, and exceptionally clear virgin polypropylene, this plate can withstand temperatures down to -80C and centrifugation at up to 4,000 x RCF.

     

    • Uniform wall thickness
    • Easy well identification with molded-in alpha-numeric position markings
    • Raised rims for easy and secure sealing with adhesive films, silicone mats, or heat-sealing films
    • Raised rims help protect from cross contamination

     

    Item#:
    AS96DPWELRWUBBTM45GL

    Glass Coated Plate, 96 Round Well V-Bottom 14.60mm Height, 300ul

     
    Glass coated, polypropylene microplates.  The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample.  This SiO2 coating helps to:

    • Reduced binding
    • Increase chemical resistance
    • Protect the same from any potential compounds leached from the plastic.
     
    The plate design:

    The 96 round well V-bottom design minimizes reagent usage and provides the lowest residual volumes after pipetting (<0.1 l); designed for colorimetric assays and compound storage/ libraries, especially with automated systems.

    • Consistent automated handling – ultra-flat surfaces, sidewall gripper lugs, and rigidity
    • Durable – withstands repeated freeze/thaw cycles down to -20C without adversely affecting dimensional integrity
    • Raised rims on each well help protect from cross contamination and make for enhanced sealing with adhesive films, silicone mats, or heat sealing films.
    • Manufactured of exceptionally clear and inert virgin polypropylene (no mold release agents or regrind)
    • Certified RNase, DNase, DNA, and Pyrogen Free.

    Specifications:


    General Features
    Volumes & Dimensions
    Performance
    Shipping & HandlingQuantity: 1 Plate/Pack, 10 Packs/Case, 1 Plate/Pack, 100 Packs/Case
     
    Item#:
    ASGC96RVB1460H300U

     

    As of 06/26/23 The items below are being discontinued and will no longer be available when existing supplies are exhausted.

     

    3911-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, in 96 Racks, Sterile

    3912-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 12, in 96 Racks, Sterile

    3913-855-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 8, Sterile

    3914-845-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 12, Sterile

    3915-800-000-9 | PurePlus® 1.2 mL Individual Sample Library Tubes, In Reusable Bags, Non-Sterile

    3916-800-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, In Reusable Bags, Non-Sterile   

     


    Labcon PurePlus® Sample Library Tubes 

    All racked tubes include rack lids.

    • ATP, RNase/DNase, and Endotoxin Free (non-pyrogenic)
    • Freezable (-80°C)
    • Autoclavable (122°C, 15 minutes)
    • Made of polypropylene

    PurePlus® Sample Library Tubes are designed for long-term specimen storage. Caps and tubes come in different packages. Separate closures strips are available. 96 tube format with printed alphanumeric grid and a clear lid.

     

    Library tubes available as: Individual tubes, 8-well, and 12-well tube strips.
     

    All racked tubes include rack lids. Tube closures are sold separately.

     

    Proudly made in the USA! Click here for more made in America products!
     

    Item#:
    ASLABLIBTUBES

    For Identifying Autograms (Radiological and Chemilluminescent)

    • Ideal for chemilluminescence and radiological autography
    • Great for documentation and archiving
    • Use your own codes & symbols
    • Fast & easy marking system
    • Non-radioactive

    Radtape's phosphorescent, adhesive labels may be cut to the specific size and shape needed for each individual membrane, dried gel or microarray. An ordinary pen may be used to mark the label using the investigator's own codes and symbols. The custom label may then be peeled from its backing and affixed to the membrane, gel or microarray. Once placed against film, Radtape exposes a negative image of the markings directly onto the autorad, thus producing a permanent record of the experiment. Choose RadTape Plus for a heavy duty, water-proof alternative to RadTape.

    Item#:
    RAD-10
    Your Price:
    67.17
    Each
    This item is discontinued
    Polyolefin, 2.8 mil, Ultra-

    These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR applications.

    Encapsulated silicone greatly reduces the risk of sample contamination due to exposure to adhesive. Once the film is pressed onto the plate, the raised portion of the well penetrates the encapsulation and a tight seal is formed on just that surface (not over the sample). This silicone seal adheres aggressively and diminishes the possibility of "Edge Effect".

    The plasticized backing of this film is scored on both ends to allow for two handed (precise) placement on the plate. Both film and adhesive maintain incredible clarity and are the choice for highly demanding manual and automated processes.

    Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

    Length

    141.27 mm

    Length (w/ end tabs removed)

    117.5 mm

    Width

    77.8 mm

    Overall Thickness

    2.8 mil

    Adhesive Thickness

    2.0 mil

    Material

    Polyester

    Adhesive

    Encapsulated Silicone

    Max. Temperature

    120 °C

    Min. Temperature

    -40 °C

    Primary Usages

    Real Time PCR (qPCR), PCR
    Item#:
    MID-UC500
    Your Price:
    1114.00
    Each
    Storage Film

    The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.

    This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.

    The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.

    For PCR applications see our standard PCR film or our Real Time PCR film.

    For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.

    Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.

    Length

    146.05 mm

    Length (w/ end tabs removed)

    119.05 mm

    Width

    79.38 mm

    Overall Thickness

    3.1 mil

    Adhesive Thickness

    1.1 mil

    Material

    Polyester

    Adhesive

    Medical Grade Acrylic

    Max. Temperature

    120 °C

    Min. Temperature

    -40 °C

    Primary Usages

    Elisa, Storage or Sample Cover
    Item#:
    MID-PCR-TS
    Your Price:
    195.00
    Each
    This item is discontinued
    |◀ ◀ 193 - 202 of 202 ▶ ▶|
    View: