CelCulture® CO2 Incubators

• Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
• Direct heat & air jacket design with gentle yet effective forced convection.
• Intuitive interfaces and intelligent data and event logger.
• Preventative maintenance kit includes filter and inline filter for direct mounting type.
  

The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.

Key Benefits

• CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
• SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
• All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
• The incubator's main body is made from electro-galvanized steel with Esco's unique ISOCIDE™ antimicrobial coating.
• SwiftCon™ moist heat 90°C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
• CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
• CO2 tank depletion reminder in addition to CO2 tank-low alarm.
• ULPA-reminder will alert user to replace ULPA filter

VivoCell™ Precise Temperature, CO2 Control and High Humidity

• Best uniformity and control among available CO2 Incubators
• Fast CO2, temperature, and humidity recovery without overshoot.
• Direct heat design for rapid recovery, with 8 heaters grouped into 3 zones.
• Air jacket provides isolation against ambient temperature fluctuations.
• Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
• Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.

Easy-to-Clean

• Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
• Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
• Glass door and inner gasket are removable without tools

AEOLUS™ CO2/Non-CO2 Compact Incubator Shaker -3mm

•  7” high-res color touch screen with intuitive graphic interface
• Innovative chamber design features smooth rounded internal corners for easy cleaning
• Infra-Red (IR) CO2 sensor for precise and reliable CO2 detection
• Optional WiFi and RS485 control
• UV lights for easy sterilization
• Audible and visual alarms
• Mirror finish, pharmaceutical grade stainless steel chamber
• Stackable design up to 3 units
• Also available in 25mm and 50mm orbit models
• Able to Stack with 25 and 50mm Orbit Models

AEOLUS™ Compact CO2 Incubator Shaker

Color-coded for easy identification 

Each box is secured with a rust-resistant nickel-plated clasp and hinge pin. Available with either cork or foam lining. Each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Boxes stack securely on top of each other, and are available in blue, green, red, yellow, white, gray, or black. Measures 8.75 x 6.75 x 1.3".

 
Benchmark™ Mini Nutating Rocker

• Includes dimpled mat; ideal for mixing in blood & centrifuge tubes
• Tri-directional motion for thorough, uniform mixing
• Cold room and incubator safe

The Mini Rocker is a multi-functional shaker that provides a three-dimensional nutating motion for thorough foam-free mixing in tubes as well as a variety of flat vessels.  The model comes standard with an autoclavable dimpled mat and optional flat mats are available for mixing with other vessel types. This mixer features maintenance-free, brushless motors and is capable of loads up to 2 kg, and is safe for use in cold rooms or incubators.
 

The Benchmark™ Mini Nutating Rocker comes with a flat cord and an 8 x 6-inch platform with dimpled and flat mats. The rocker is designed to fit inside Digital Mini Incubators (H2200-H/H220-HC)

Specifications 

Non-Treated Suspension Cell Culture Flasks

• Non-treated Suspension Culture Versions
• Uniform hydrophilic surface ideal for consistent cell attachment
• Convenient zip-closure bag is a practical alternative to folding and taping open bags
• Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers
• Stable base enables filling with flask standing upright
• Thick, durable walls
• Flask is printed with lot number and expiration date for easy identification and tracking
• Molded, interlocking T design for improved stacking on 75, 182, & 300cm² and 250, 600 & 850mL size flasks
• Vent caps feature 0.22µm hydrophobic membrane
• 182cm² flask offers more growth area than standard 175cm ² flasks
• 182cm² Deep Volume Flask has extra depth, allowing more media volume; you can leave cell cultures to grow for longer without drying out or depleting all nutrients (maintain your cell cultures over the weekend)

NEST Scientific Petri Dishes

Sterile, Stackable, and Easy to Identify.

NEST Scientific Petri Dishes are high-quality, disposable culture dishes designed for reliable performance in microbiology, cell culture, and laboratory testing. Featuring a flat, transparent surface for clear observation and a numeric mark on the bottom for easy sample identification, these petri dishes support consistent, contamination-free results.

Each dish is sterilized by E-Beam to a Sterility Assurance Level (SAL) of 10, ensuring dependable sterility and safety in sensitive laboratory environments. The PA/PE packaging provides excellent barrier protection, while built-in vents allow for proper gas exchange to promote healthy cell and microbial growth.

With a stackable design, these dishes are easy to store and handle, making them ideal for high-throughput labs, clinical settings, and research applications. They are also non-pyrogenic, reducing the risk of interference in biological testing.

Key Features

• Flat Transparent Surface – Ensures optimal visibility for sample monitoring.
• Numeric Identification Mark – Molded on the bottom for easy tracking and labeling.
• Sterile and Non-Pyrogenic – E-Beam sterilized, SAL = 10 for reliable contamination control.
• Gas Exchange Vent – Allows proper airflow to support culture growth.
• PA/PE Packaging – Protects product integrity during storage and shipping.
• Stackable Design – Saves space and simplifies dish handling. 

Ideal for research labs, universities, and clinical facilities, NEST Scientific Petri Dishes deliver consistent quality and user-friendly features to enhance your workflow.
 

Stackable Petri Dishes

Stackable Polystyrene Petri Dishes – Sterile & Disposable.

Explore our premium selection of stackable sterile petri dishes, engineered for general microbiological use, pharmaceutical testing, and environmental monitoring. Molded from optically clear medical-grade virgin polystyrene, these dishes are radiation sterilized and individually traceable for quality assurance.

Available in multiple configurations, standard mono, bi-plate, tri-plate, quad-plate, and deep-well, our petri dishes are designed for performance, safety, and convenience in any lab setting.

Choose the right size and format to meet your specific testing needs.

Key Features

• Sterile, single-use polystyrene for contamination-free experiments
• Stackable design with ventilation ribs to reduce condensation
• Clear top and bottom surfaces for optimal sample visibility
• Consistent flatness ensures even media distribution
• Radiation sterilized - sterile until sleeve is opened
• Compartments for easy organism differentiation (1, 2, 3, and 4 compartment models)
• Flared lid skirts & squared corners for one-hand operation, even with gloves

Specifications
 

Item #	Diameter	Height	Compartments	Type	Features	Iso Mark	Sterility
901	60 mm	15 mm	1	Stackable	Media Saver	No	Sterile
900	100 mm	15 mm	1	Stackable	Industry Standard	No	Sterile
906	100 mm	25 mm	1	Stackable	Extra Deep Dish	No	Sterile
903	100 mm	15 mm	2	Stackable	2 Compartments	No	Sterile
912	100 mm	15 mm	3	Stackable	3 Compartments	No	Sterile
913	100 mm	15 mm	4	Stackable	4 Compartments	No	Sterile

Slippable Petri Dishes

Slippable Polystyrene Petri Dishes with Rim – Automation Compatible.

Our Slippable Polystyrene Petri Dishes are engineered for both manual handling and automated lab systems, offering unmatched performance for general microbiological and laboratory applications.

Each dish features a precision-molded rimmed lid that enables semi-stacking for manual use, while maintaining smooth compatibility with automated filling and streaking equipment. The lid’s flared skirt and squared corners allow for easy one-hand operation, especially when wearing gloves.

Made from medical-grade virgin polystyrene, these dishes provide optically clear surfaces for excellent viewing. They are radiation sterilized, and contents remain sterile if the sleeve is unopened, ensuring product integrity in sterile environments.

Designed with ventilation ribs, these dishes promote air circulation and reduce condensation during incubation. Select models include Side Arrows and Iso Mark Targets for easy orientation in automation processes.

Key Features

• Slippable rimmed lid supports semi-stacking and automated use
• Disposable, single-use polystyrene for general microbiology
• Molded from medical-grade virgin polystyrene
• Optically clear top and bottom surfaces
• Radiation sterilized - Contents sterile if sleeve is unopened
• Ventilation ribs to reduce condensation during incubation
• Consistent flatness for even media distribution
• Flared lid skirt with squared corners for easy, gloved handling
• Side Arrows and Iso Mark Targets available on select models

Specifications

Item #	Diameter	Height	Compartments	Type	Features	Iso Mark	Sterility
916	60 mm	15 mm	1	Slippable	Media Saver	No	Sterile
950	85 mm	13 mm	1	Both	Ultra Plate, Stackable / Slippable	Yes	Sterile
914	95 mm	15 mm	1	Slippable	Media Saver	No	Sterile
904	100 mm	10 mm	1	Slippable	Space Saver	No	Sterile
910	100 mm	15 mm	1	Slippable	Industry Standard	Yes	Sterile
910-P	100 mm	15 mm	1	Slippable	Standard, Sleeve printed with “Contents Sterile if Sleeve is Unopened”	Yes	Sterile
917	100 mm	15 mm	1	Slippable	Clear Viewing Surfaces	No	Sterile
905	100 mm	20 mm	1	Slippable	Deep Dish	Yes	Sterile
909	100 mm	25 mm	1	Slippable	Extra Deep, Seed Germination Tests	No	Sterile
911	100 mm	15 mm	2	Slippable	2 Compartments	Yes	Sterile
312	100 mm	15 mm	3	Slippable	3 Compartments	Yes	Sterile
313	100 mm	15 mm	4	Slippable	4 Compartments	Yes	Sterile
344	100 mm	10 mm	1	Slippable	Space Saver	Yes	Sterile

 

Proudly made in the USA! Click here for more made in America products!
  

Slippable Petri Dishes - No Rim

Our automation petri dishes with no rim are expertly designed to meet the demands of high-throughput automated systems, offering seamless performance in microbiology and general laboratory workflows.

These rimless petri dishes eliminate edge interference, allowing for precise handling by automated filling, stacking, and streaking equipment. With smooth lid integration, these dishes ensure fast and consistent processing in robotic environments.

Manufactured from medical-grade virgin polystyrene, they deliver optical clarity for accurate visual inspections. All dishes are radiation sterilized, ensuring sterility and safety in controlled lab conditions.

Select models feature Side Arrows and ISO Mark Targets to assist with orientation and alignment during automation processes.

Key Features

• Rimless lid design optimized for full automation use
• Disposable, single-use polystyrene suitable for microbiology
• Molded from high-quality medical-grade virgin polystyrene
• Optically clear for superior sample visibility
• Radiation sterilized - Contents sterile if sleeve is unopened
• Compatible with automated filling and streaking systems
• Available with Side Arrows and ISO Mark Targets for alignment and orientation
• Consistent flatness ensures even media distribution
• Ideal for high-efficiency, sterile lab environments

Whether you're streamlining workflows or expanding automated lab capabilities, our rimless automation petri dishes are the reliable choice for speed, accuracy, and sterility.

Specifications
 

Item #	Diameter	Height	Compartments	Type	Features	Iso Mark	Sterility
100	65 mm	15 mm	Contact	No Rim, Slippable	Convex Bottom	No	Sterile
404	100 mm	10 mm	1	No Rim, Slippable	Space Saver	No	Sterile
920	100 mm	15 mm	1	No Rim, Slippable	Automated Lid	No	Sterile
410	100 mm	15 mm	1	No Rim, Slippable	Industry Standard base	Yes	Sterile
405	100 mm	20 mm	1	No Rim, Slippable	Deep Dish	Yes	Sterile
406	100 mm	25 mm	1	No Rim, Slippable	Extra Deep Dish	No	Sterile
902	150 mm	15 mm	1	No Rim, Slippable	Concentric Bottom Ring	No	Sterile
411	100 mm	15 mm	2	No Rim, Slippable	2 Compartments	Yes	Sterile
412	100 mm	15 mm	3	No Rim, Slippable	3 Compartments	Yes	Sterile
413	100 mm	15 mm	4	No Rim, Slippable	4 Compartments	Yes	Sterile

Petri Dish Plate Stickers

PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing and apply it to the back of a petri dish. After labeling, the dish can be held in a comfortable position for streaking or colony transfer, stored in an incubator or refrigerator, and photographed.

U of M: 36/pack

Formats: 32, 50, 70 & 100 Square Grids

Proudly made in the USA! Click here for more made in America products!