|◀ 13 - 24 of 31 ▶|
View:


Mini CO2 Incubated Shake 

Ideal for the culturing cells, the Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform (9.5 x 11.5 in.) can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates, media bottles, and bioreactors. For higher speed mixing, a MAGic Clamp platform is available for magnetic attachment of flask clamps and tube racks.

The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination.


Key Features:

  • Six side direct heating for excellent uniformity and recovery
  • Integral, MAGic clamp orbital shaker, idea for suspension cell culture
  • Dual Beam IR sensor, for precise CO2 control.
  • Stackable design with beltless motor which limit vibration and provide a smooth, consistent shaking motion.
  • Stainless steel chamber with rounded corners for easy cleaning.

TECHNICAL DATA:

Temperature Range:

Ambient +5 to 60°C

Temperature Accuracy:

±0.5°C*

Temperature Uniformity:

±0.5°C*

Temperature Increment:

0.1°C

Temperature Stability:

0.1°C*

Speed Range:

30 to 300 rpm

Speed Increment:

1 rpm

Mixing Orbit:

19mm (3/4 in.)

CO2 Range:

0 to 20%

CO2 Increment:

0.1%

CO2 Accuracy:

±0.1%

CO2 Sensor:

Dual Beam IR

Time Range:

1 min. to 48 hours (or continuous)

Platform Dimensions:

9.5 x 11.5 in. (23.5 x 29 cm)

Chamber Dimensions:

13.2 x 10.25 x 15.4 in.
(33.5 x 26 x 39.2 cm)

Chamber Volume:

46L

Chamber Material:

Stainless Steel

Exterior Dimensions:

16.5 x 18.3 x 21.8 in. (42 x 46.5 x 55.3 cm)

Weight:

90 lbs / 40.1 kg

Electrical:

120V or 230V, 50-60Hz (350W)

* At a set temperature of 37.0°C

MAXIMUM CAPACITY CHART:

50ml
Flasks

125ml
Flasks

250ml
Flasks

500ml
Flasks

1000ml
Flasks

Micro
plates

15ml
Tubes

50ml
Tubes

20

12

8

5

4

4

64

30

ORDERING INFORMATION:

H3501*

Incu-Shaker CO2 Mini, with non-slip rubber mat platform (9.5 x 11.5in.)


115V

MAGic Clamp Accessories


IS-PLAT

MAGic Clamp Universal Platform, 9.5 x 11.5 inch

H1000-MR-CMB

MAGic Clamp Adjustable Flask Clamp, for 125, 250 & 500ml
Erlenmeyer ï¬asks (max. 12 x 125ml, 8 x 250ml or 5 x 500ml)

IS-50

Magic Clamp Flask Clamp, for 50ml Erlenmeyer ï¬ask (max. 20)

IS-125

Magic Clamp Flask Clamp, for 125ml Erlenmeyer ï¬ask (max. 12)

IS-250

Magic Clamp Flask Clamp, for 250ml Erlenmeyer ï¬ask (max. 8)

IS-500

Magic Clamp Flask Clamp, for 500ml Erlenmeyer ï¬ask (max. 5)

IS-1000

Magic Clamp Flask Clamp, for 1L Erlenmeyer ï¬ask (max. 4)

IS-T 15

Magic Clamp Tube Rack, 32 x 15ml (max. 2)

IS-T50

Magic Clamp Tube Rack, 15 x 50ml (max. 2)

IS-1550

Magic Clamp Tube Rack, 32 x 15ml (max. 1)

IS-T600

Magic Clamp Tube Rack, 4 x 500/600ml bottles

IS-MR-TSR

Magic Clamp Slanted Tube Rack Holder, holds tube racks at an adjustable angle

Additional Accessories


IS-PMP

Dedicated Platform, 4 x microplates

IS-PSR

Universal Spring Platform

*230V option is also available.

Item#:
ASMINICO2WNSRM

Capp Rondo Plate Shaker


Capp Rondo Microplate Shaker

Capp Rondo microplate shaker is the ideal choice for any test environment. The footprint is as small as the 96 well plate itself, taking up minimal benchtop space. Interchangeable clamps, delivered with the instrument, allow for a universal fit of commonly used micro- and microtiter plates. Moreover, Capp orbital plate shakers ensure extremely easy plate loading with stable, quiet and long-life operation. Also included is a compact platform for 20 microtubes of 1.5 / 2mL.

The wide speed setting range of 300 up to 1800 rpm, as well as the orbital motion of 2mm (1mm radius), enables performing of numerous applications including PCR, ELISA, enzyme immunoassays, protein synthesis and pharmaceutical profiling. Capp orbital plate shaker can also be used inside cold rooms or fume hoods (up to 40°C).
Item#:
ASCAPPRONDOSHAKE
  • Shake and incubate samples simultaneously
  • Interchangeable platforms for tubes and plates
  • Fine-tune Speed Control
  • Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2mL to 15mL. Designed to meet the high-paced demands of today's lab, the exceptional performance of this product make it an essential part of your daily research.

Product Specifications
Model 1-4001-HCS 1-4002-HCS
Temperature range Ambient -14° to 100°C Ambient -14° to 100°C
Temperature accuracy ±0.5°C ±0.5°C
Speed range 300 - 1500rpm 300 - 1500rpm
Motion/orbit Horizontally circular/3 mm Horizontally circular/3 mm
Capacity Per selected block style Per selected block style
Dimensions (W x D x H) 12.9 x 6.5 x 9.8 inches/33 x 16.6 x 24 cm 12.9 x 6.5 x 9.8 inches/33 x 16.6 x 24 cm
Weight 18.75 lb/8.5 kg 18.75 lb/8.5 kg
Electrical* 120V~, 60 Hz 230V~, 60 Hz

Inquire about additional accessories:
1-4000-A, 1-4000-B, 1-4000-C, 1-4000-D, 1-4000-E, 1-4000-G, 1-4000-H, 1-4000-J

Item#:
ASSHAKER20

Labnet DS Shaking Incubator

The new DS Shaking incubator from Labnet offers exceptional versatility and a compact design, which allows the door of the incubator to open under shelves. It will accommodate flasks from 125 mL up to 1000 mL as well as 15/50 mL tubes and microplates. The SmartCheck software included with the system is not required for control, but can be easily installed on a Windows PC computer to monitor temperatures and RPM.


Technical Specifications 

Speed

20-300 RPM

Orbit

Circular, 19 mm (3/4 in)

Temp Range

Ambient + 5 ° C - 70 ° C

Temp Increments

0.1 ° C

Temp Accuracy

+/- 0.5 ° C

Temp Uniformity

+/- 0.5 ° C

Speed Increments

1 RPM

Platform Dimension

30 X 30 cm (11.8 X 11.8 in)

Operation Temp Range

4 ° C-65 ° C

Dimensions (W X D X H)

37 X 53 X 40 cm (14.6 X 20.9 X 15.7 in)

Weight

19.5 kg (43 lb)

Height lid open

55 cm (21.7 in)

USB temp monitor

Yes,with Smart Check Software

Timer

1 min-99 hours or continuous

Open door lid cutoff switch

Yes

Warranty

2 years

 


Item#:
ASSHAKER23
  • Shake and incubate samples simultaneously
  • Complete with shaking racks for 15ml and 50ml conical tubes
  • Intelligent, digital control
  • Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.


Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.


A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.


The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

Product Specifications
Temperature range Ambient +5° to 100°C
Temperature accuracy ±0.5°C
Speed range 200-900 rpm
Motion/orbit Horizontally circular/3 mm
Capacity 8 x 50ml / 18 x 15ml
Dimensions (W x D x H) 8.9 x 12.3 x 13 inches/22.5 x 12.3 x 33 cm
Weight 26 lb/11.8 kg
Electrical* 120V or 230V, 50/60 Hz
Item#:
ASSHAKER24

Orbit™ 1000 Digital Orbital Shaker

 

Four platform configurations allow the Orbit™ 1000 Digital Orbital Shaker to meet a variety of shaking and mixing applications. Single and double flat platforms hold trays, plates, and dishes. The double platform allows for expansion of the shaker capacity without increasing the footprint. The universal platform has spring-loaded bars that adjust to fit flasks, bottles, tube racks, and odd-shaped containers. Pre-drilled to hold Erlenmeyer clamps (clamps sold separately), the flask platform is ideal for mixing and growing cultures. Platforms are removable and interchangeable.

  • Four available platform configurations
  • Mid-range orbit for excellent culture aeration
  • Compact construction for incubator use
  • Solid and heavy duty

At the heart of the Orbit™ 1000 is a powerful brushless motor and counterbalanced shaker mechanism that provides smooth operation and years of trouble-free use. Speed and time are set with an analog knob, while the set and current values are displayed digitally. Speed is adjustable over a broad range to allow for applications such as staining and destaining gels, growth of bacterial cultures, and hybridization. The Orbit™ 1000 Digital Shaker is safe for use in temperature-controlled environments. Its small footprint and low profile make it ideal for use in incubators. Platforms are sold separately.

 


Specifications

Speed Range20-300 rpm
Timer0-99 min or continuous
MotionHorizontally Circular
Orbit19 mm
Maximum Capacity4 x 1 L
5 x 500 mL
9 x 250 mL
16 x 125 mL
Maximum Load4 kg
(8.8 lb)
Ambient Operating Temperature+4°C to 65°C
Dimensions25.6 cm x 31.8 cm x 12.7 cm
(10.1 in. x 12.5in. X 5 in.)
Weight7.3 kg
(16 lb)
Power Requirements120VAC, 60Hz
Other Voltages Available On Request

 

Item#:
ASSHAKER29

Pro 30 Reciprocal Lab Shaker

The Pro 30 shaker features a left-to-right linear action to provide gentle to vigorous shaking. Four platform configurations make this model valuable for a variety of applications.


  • Four stainless steel platform options
  • Reciprocal motion for staining, washing blots, and general mixing
  • Economical analog control with easy-turn knobs
  • Safe for cold room and incubator use

 

Modern styling gives the Pro 30 a small footprint and an easy-access control panel. Speed and time are electronically controlled while their values are set with easy turn knobs. The four platform configurations include a large 30 x 30 cm flat platform with a non-slip rubber mat to hold sample containers in place. For added capacity, a stacked double platform is also available. The spring-loaded universal platform holds tube racks, bottles, and odd-shaped containers. Flasks up to 1L can be shaken off the flask clamp platform. Pre-drilled to hold a variety of different-sized clamps, the platform, and clamps are sold separately. Platforms are easily interchanged. The Pro 30 is safe for use in temperature-controlled environments.


 

Specifications

Speed Range6 - 150 strokes/min
Timer20 - 120 min (10 min inc.)
or continuous
MotionLinear, 30 mm stroke length
Maximum load11 lb/5 kg
Ambient operating range+4° to 70°C
Dimensions (W x D x H)10 x 12.6 x 6.3 in/25.5 x 32 x16 cm
Weight14.5 lb/6.6 kg
Electrical230V~ or 120~, 50/60 Hz


 

 

Item#:
ASSHAKER28

 
Benchmark™ Orbi-Shaker™ CO2-MP
All Environment Shaker for Microplates

  • Designed for use in CO2 incubators and other extreme environments
  • Remote controlled, adjust settings without exposing the chamber
  • 3 mm orbit for thorough mixing of well plates
  • Includes 6-position microplate platform

 

The Orbi-Shaker™ CO2-MP is designed for thorough mixing of microplates in extreme environments such as CO2 incubators. It can withstand temperatures from 4° to 65°C and humidity levels up to 100%.

 

To extend the lifetime of the shaker, all the electronics are in a remote-control module that is placed outside the chamber. This has the added advantage of adjusting the shaker speed and time without opening the chamber door and disturbing the interior environment. The controller's thin, flat cord will not interfere with the door seal and the unit can magnetically mount to the outer housing of the incubator. A 6-position microplate platform is included and secures both standard or deep well plates.

 

Specifications
 
Speed Range200 to 1200 rpm
Speed Increment1 rpm
Orbit3 mm
Timer1 min. to 99 hr or continuous
Ambient Operating Temp.+0°C to +65°C
Platform Size13 x 12 in. | 33 x 30 cm
Load Capacity6 x microplates
Dimensions11.9 x 13.4 x 3.5 in.
30 x 34 x 9 cm
Weight25 lbs (11.5kg)
Cord Length60.5 in. | 154 cm
Electrical115 or 230V 50-60Hz; 600W
Warranty2 Years
 

  • Exclusive SmartChek temperature control system
  • Stackable design saves space
  • Full range of accessories available
  • Internal electrical outlet

  • A small footprint, compact, stackable design and expanded temperature range make the 211DS incubators ideal for molecular biology and general use. Its integral orbital shaker makes it highly versatile.

    MIDSCI's exclusive SmartChek temperature control system guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double glass observation panel and opens nearly 180° for easy access.

    Two full and one half shelf are supplied with each incubator. A flat platform and predrilled flask platform (clamps sold separately) are available for the 211DS.

    Internal electrical outlet allows using small equipment such as GyroMini or Mini LabRoller Rotator inside the chamber of the 211DS. 


Product Specifications
Chamber volume 1.7 cu. ft.
Temperature range/display 30° to 80°C1 in 0.1° increments/digital
Temp. uniformity/accuracy ±0.25°C/±0.1°C
Shaker speed/orbit (DS,) Variable, 20 to 400rpm/19 mm
Flask capacity (DS,) 4 x 1 L, 5 x 500 ml, 9 x 250 ml, 16 x 125 ml
Construction Interior - mirrored stainless, exterior - cold rolled steel
Chamber (W x D x H) 13.5 x 14.75 x 15 inches/34.3 x 37.5 x 38.1 cm
Exterior (W x D x H) 16.75 x 21.75 x 23 inches/42.5 x 55 x 58 cm
Weight D -73 lb/32.2 kg, DH- 83 lb/37.7 kg, DHS - 85 lb/38.2 kg
Electrical* 120V~, 60 Hz
*Maximum 80°C in 211DS *Other voltages available upon request
Item#:
ASSHAKER17
with 30X30cm Platform 120 Volt
  • Economical analog control with easy-turn knobs
  • 19 mm orbit for blotting, gel staining and general mixing
  • Streamlined design
  • Safe for cold room and incubator use
  • 1 Year Warranty

The Orbit LS low speed shaker is a high quality, general purpose shaker with economical analog control.

Styled after the other models in the line, the Orbit LS features a streamlined, compact design with easy-access control panel. Electronic controls are utilized for setting speed and time. The knobs used for selecting parameters turn easily and are clearly marked with corresponding values.

A large orbit and low speed make the Orbit LS useful for staining and destaining gels, washing blots and general mixing. The shaker is supplied with a 30 x 30 cm stainles steel flat platform and non-slip rubber mat to keep plates, dishes and other sample containers in place.

Safe for use in temperature controlled environments, the small profile of this shaker makes it ideal for use in incubators such as the Labnet 311 and 611 series.

Product Specifications
Speed range 3 - 60 rpm
Timer 20 - 120 min (10 min inc.) or continuous
Motion Circular, 19 mm
Maximum load 11 lb/5 kg
Ambient operating range +4° to 70°C
Dimensions (W x D x H) 10 x 12.6 x 6.3 in/25.5 x 32 x16 cm
Weight 14.5 lb/6.6 kg
Electrical 120V~, 60 Hz or 230V~, 50 Hz
Item#:
S2030-LS
Your Price:
1577.60
Each

Benchtop Incubated Shakers

Performance

  • Temperature range:
    • Ambient +5°C to 80°C for IST-3075 / 4075.
    • Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
  • Competitive high shaking speed up to 500 rpm.
  • Orbital shaking motion in 19mm diameter.
  • Microprocessor PID control.
  • Three-point temperature calibration / Automatic tuning.
  • Wide speed range even with heavy workload.
    • Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
  • Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
    • Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
  • Pleasant test environment by the smooth acceleration and deceleration control.
    • Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
  • High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
  • Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

  • Intuitive touch screen LCD controller with easy icons and logical menus.
  • Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
  • Wide sample monitoring and convenient sample loading.
    • Convenient sample monitoring without affecting inside environment thanks to the three-side transparent acryl lid with bright LED lamps.
    • Gas spring lid supports providing smooth motion, soft opening and closing.
  • Repetitive task can be easily performed as the platform stops where it starts.
    • Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
  • Corrosion resistance stainless steel interior.
  • Built-in RS-232 port and USB port for external control and data collection.

Safety

  • Automatic run after power interruption.
  • Temperature and shaking speed deviation alarm.
  • Over-current protection, Stalled platform check.
  • Mechanical over-temperature protection device.
  • Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
  • Audible and visible open-door alarms.

  • ITEM NO. AAH23465U AAH23565U AAH23665U AAH23765U
    MODEL NO. IST-3075 IST-3075R IST-4075 IST-4075R
    Temperature Range Amb. +5 to 80°C /  Amb. -15 (Min. 15) to 80 / Amb. +5 to 80°C /  Amb. -15 (Min. 15) to 80 /
    Amb. +9 to 176°F  Amb. -27 (Min. 27) to 176 Amb. +9 to 176°F  Amb. -27 (Min. 27) to 176
    Temp. Fluctuation at 37°C in flask 
    ± 0.1°C / 0.18°F
    Temp. Variation at 37°C in flask
    ± 0.5°C / 0.90°F
    Refrigerator (Hp) - 1 / 6 HBP - 1 / 6 HBP
    Motion type
    Orbital
    Amplitude size (dia.)
    19.1mm / 0.75in
    Speed range (RPM)
    20 to 500rpm
    Accuracy
    ±1% of set speed (>100rpm) / ±1 (100rpm)
    Timer
    1 min. to 999 hr 59 min.
    Max. load  10kg / 22lbs at 500 rpm 14kg / 30.9lbs at 500 rpm
    15kg / 33.1lbs at 400 rpm 21kg / 46.3lbs at 400 rpm
    Volume 53L / 1.9 CuFt 83L / 2.9 CuFt
    Platform (W×D)  350×350mm / 13.8×13.8in 450×450mm / 17.7×17.7in
    Interior (W×D×H) 410×410×320mm / 16.1×16.1×12.6in 510×510×320mm / 20.1×20.1×12.6in
    Exterior (W×D×H) 440x785x510mm / 17.3x30.9x20.1in 540x 890 x510mm / 21.3x35x20.1in
    Net weight 65kg / 143.3lbs 73kg / 160.9lbs 81kg / 178.6lbs 90kg / 198.4lbs
    Electrical requirements (120V) 60Hz, 7.5A 60Hz, 10.1A 60Hz, 7.5A 60Hz, 10.1A
Item#:
ASSHAKER19A

Grant Bio Personal Multi-Channel Bioreactors - RTS-8 and RTS-8-PLUS 

 

Personal multi-channel bioreactors with non-invasive real-time OD, pH, and pO2 measurements.

Please specify which calibration option is desired upon placing order (E.coli, S.Cerevisiae, or both E.Coli and S.Cerevisiae calibration).

 

About

RTS-8 and RTS-8 plus are personal bioreactors that utilize patented Reverse-Spin® technology that applies non-invasive, mechanically driven, low energy consumption, innovative type of agitation where cell suspension is mixed by the single-use falcon bioreactor tube rotation around its axis with a change of direction of rotation motion resulting in highly efficient mixing and oxygenation for aerobic cultivation. Combined with near-infrared, fluorescence, and luminescence measurement systems, it is possible to register cell growth kinetics, pH, and O2 non-invasively in real time. For pH and O2, innovative single-use sensor spots are used inside the tubes.

 

Although O2 supply is one of the major issues in the cultivation of aerobic organisms, especially in oxygen-limited conditions, adequate methods for real monitoring of dissolved oxygen were missing, and sufficient O2 supply was usually assumed. Innovative non-invasive oxygen sensors integrated in falcon tubes now enable online oxygen monitoring and give new insights into metabolic activities. The pH is one of the major issues in the cultivation of cells, yeast, or bacteria. Cultivation vessels that are sensor-limited are widely applied in academic and industrial bioprocess development. As adequate methods for real monitoring of pH were not available, cumbersome at-line sampling was used lacking high data density and interfering with growth. Non-invasive real-time pH measurement provides new insights into metabolic activity and changes in metabolic pathways.

 

Features

  • Parallel cultivation of 8-tube bioreactors enables to save time and resources for bioprocess optimization
  • Individually controlled bioreactor accelerates optimization process
  • Possibility to cultivate microaerophilic and obligate anaerobic microorganisms (not strict anaerobic conditions)
  • Reverse-Spin® mixing principle enables non-invasive biomass measurement in real time
  • The near-infrared optical system makes it possible to register cell growth kinetics
  • Free-of-charge software for storage, demonstration, and analysis of data in real-time
  • Compact design with low profile and small footprint for personal application
  • Individual temperature control for bioprocess applications
  • Active cooling for rapid temperature control, e.g. for temperature fluctuation experiments
  • Task profiling for process automatization
  • Cloud data storage to remotely monitor the process of cultivation while at home or using a mobile phone
  • For the plus model - Non-invasive O2 and pH measurement allows for accurate monitoring of metabolic activities

 

Software Features

  • Real-Time cell growth logging
  • Real-Time pH and O2 measurement and logging (RTS-8-Plus)
  • 3D graphical representation of OD or growth rate over time over unit
  • Pause option
  • Save/Load option
  • Report option: PDF and Excel
  • Remote monitoring option (requires internet connection)
  • Cycling/Profiling options
  • User manual calibration possibility for most cells

To fully use RTS-8 Plus capabilities, the device must be connected to a PC and RTS-8 software. The device cannot be used as a standalone unit.
 
 

Applications

  • Fermentation real-time growth kinetics
  • Clone candidate screening
  • Protein expression
  • Temperature stress and fluctuation experiments
  • Media screening and optimization
  • Growth characterization
  • Inhibition and toxicity tests
  • Strain quality control
  • Initial bioprocess optimization studies   

 
 

Item#:
ASMULTIBIOREACT
|◀ 13 - 24 of 31 ▶|
View: