S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Grant Bio Personal Multi-Channel Bioreactors - RTS-8 and RTS-8-PLUS
Personal multi-channel bioreactors with non-invasive real-time OD, pH, and pO2 measurements.
Please specify which calibration option is desired upon placing order (E.coli, S.Cerevisiae, or both E.Coli and S.Cerevisiae calibration).
About
RTS-8 and RTS-8 plus are personal bioreactors that utilize patented Reverse-Spin® technology that applies non-invasive, mechanically driven, low energy consumption, innovative type of agitation where cell suspension is mixed by the single-use falcon bioreactor tube rotation around its axis with a change of direction of rotation motion resulting in highly efficient mixing and oxygenation for aerobic cultivation. Combined with near-infrared, fluorescence, and luminescence measurement systems, it is possible to register cell growth kinetics, pH, and O2 non-invasively in real time. For pH and O2, innovative single-use sensor spots are used inside the tubes.
Although O2 supply is one of the major issues in the cultivation of aerobic organisms, especially in oxygen-limited conditions, adequate methods for real monitoring of dissolved oxygen were missing, and sufficient O2 supply was usually assumed. Innovative non-invasive oxygen sensors integrated in falcon tubes now enable online oxygen monitoring and give new insights into metabolic activities. The pH is one of the major issues in the cultivation of cells, yeast, or bacteria. Cultivation vessels that are sensor-limited are widely applied in academic and industrial bioprocess development. As adequate methods for real monitoring of pH were not available, cumbersome at-line sampling was used lacking high data density and interfering with growth. Non-invasive real-time pH measurement provides new insights into metabolic activity and changes in metabolic pathways.
Features
- Parallel cultivation of 8-tube bioreactors enables to save time and resources for bioprocess optimization
- Individually controlled bioreactor accelerates optimization process
- Possibility to cultivate microaerophilic and obligate anaerobic microorganisms (not strict anaerobic conditions)
- Reverse-Spin® mixing principle enables non-invasive biomass measurement in real time
- The near-infrared optical system makes it possible to register cell growth kinetics
- Free-of-charge software for storage, demonstration, and analysis of data in real-time
- Compact design with low profile and small footprint for personal application
- Individual temperature control for bioprocess applications
- Active cooling for rapid temperature control, e.g. for temperature fluctuation experiments
- Task profiling for process automatization
- Cloud data storage to remotely monitor the process of cultivation while at home or using a mobile phone
- For the plus model - Non-invasive O2 and pH measurement allows for accurate monitoring of metabolic activities
Software Features
- Real-Time cell growth logging
- Real-Time pH and O2 measurement and logging (RTS-8-Plus)
- 3D graphical representation of OD or growth rate over time over unit
- Pause option
- Save/Load option
- Report option: PDF and Excel
- Remote monitoring option (requires internet connection)
- Cycling/Profiling options
- User manual calibration possibility for most cells
To fully use RTS-8 Plus capabilities, the device must be connected to a PC and RTS-8 software. The device cannot be used as a standalone unit.
Applications
- Fermentation real-time growth kinetics
- Clone candidate screening
- Protein expression
- Temperature stress and fluctuation experiments
- Media screening and optimization
- Growth characterization
- Inhibition and toxicity tests
- Strain quality control
- Initial bioprocess optimization studies
Orbital Shaker - CO2 Resistant
2 Incubator. Designed with sealed electronics to minimize heat disruption and ensure that conditions in the CO
2 chamber are not affected.
Features:
- Remote Control attaches externally to CO
2 Incubator - LED display shows both set and actual parameters without opening the door
- Simple and intuitive design provides easy operation
- Alarm function alerts the user when the timer reaches zero
- Shaker is easy to remove for cleaning/disinfecting to protect your cells
- The Magnetic Orbital Drive system uses magnetic force to deliver precise speed control, low vibration, maintenance free operation and long service life
- Suitable for use in CO
2, Standard or Refrigerated - Incubators at up to 20% CO
2 and 90% Humidity environments - Wide range of accessories to accommodate various sample holders
Model | OSC-26M |
Orbital Diameter | 019mm (.75 in) |
Speed | 30~300rom |
Timer | 00:00~99h:59min ("O" for running continuously) |
Platform Dimensions | 305 x 360mm (12 x 14.2 in) |
Max. Load | 6kg (13.2 Ibs) |
Operating Environment | Ambient Temperature: 5°C - 60°C |
Relative Humidity: <95% | |
Max. Power | 8.5W |
Power Supply | AC100-240V. 50Hz / 60Hz |
Net Weight | 18Kg (37 Ibs) |
Shaker Dimensions | 375 × 300 x 94mm: (14.8 x 11.8 x 3.7 in) |
Control Box Dimensions | 90 x 160 x 26mm (3.5 x 6.3 x 1.02 in) |
Accessories:
Item Type | Item Number | Specifications | Max Flask Capacity |
Aluminum Platform | OSA11 | 300 × 360mm | 1 |
OSA36 | 400 x 400mm | 1 | |
Nonslip Platform with Rubber Mat | OSA12 | 305 x 360mm | 1 |
Mini Universal Spring Platform | IS-A27 | 350 x 240 x 80mm (13.8 x94 x3.1in) | 1 |
Sticky Mat | IS-A47 | 140 x 140mm (5.5x 5.5in) | 4 |
Flask Clamp | IS-A50 | Holds 25ml Flask | 30 |
IS-A1 | Holds 50ml Flask | 30 | |
IS-A2 | Holds 100ml Flask | 15 | |
IS-A3 | Holds 150ml Flask | 15 | |
IS-A4 | Holds 200ml Flask | 15 | |
IS-A5 | Holds 250ml Flask | 15 | |
IS-A6 | Holds 500ml Flask | 9 | |
IS-A7 | Holds 1000ml Flask | 6 | |
IS-A8 | Holds 2000ml Flask | 4 | |
IS-A9 | Holds 3000ml Flask | 2 | |
IS-A10 | Holds 5000ml Flask | 1 | |
Tube Rack | IS-A11 | Holds 40 Tubes x 014mm | 2 |
IS-A12 | Holds 40 Tubes x016mm | 2 | |
96-Well Microplate Holder | IS-A13 | WxD: 136 x 95mm (5.4 x 3.7 in) | 6 |
Infusion Bottle Clamp | IS-A33 | Holds 500 ml Infusion Bottle | 5 |
IS-A34 | Holds 1000 ml Infusion Bottle | 4 | |
Adjustable Tube Rack | IS-A20 | Holds 40 Tubes x 014mm | 2 |
IS-A21 | Holds 40 Tubes x 016mm | 2 | |
Fixture for Separating Funnel | IS-A35 | Holds Separating Funnels of ≥ 2500mL | 2 |
Grant Bio Personal Bioreactors
Grant-bio personal bioreactors provide a "Reverse-Spin" type of agitation and logging of microbial growth in 50 mL tubes in real-time.
RTS-1-US including TubeSpin® Bioreactor 50, TPP®, 20 pcs.
RTS-1C-US with cooling, including TubeSpin® Bioreactor 50, TPP®, 20 pcs.
Features
- Innovative mixing due to reverse spinning of the sample around its own axis
- Due to innovative mixing technology, it is possible to measure the optical density of the probe in real time
- Software has been developed to store, display, and analyze the data in real-time
- Compact device with a low profile and small footprint for personal application
- Temperature control allows use as an incubator, e.g. for cell growth
- Active cooling and temperature profiling via software [RTS-1C-US only]
- The ability to change parameters such as temperature, RPM, and "Reverse-Spin" frequency, allows the achievement of consistency and reproducibility of results
- Programmable Cycling/profiling of cultivation parameters such as temperature, RPM, "Reverse-Spin" frequency
- The ability to remotely monitor the process of cultivation while at home or using a mobile phone
Software features
- Real-Time cell growth logging
- 3D graphical representation of OD or growth rate over time over unit
- Pause option
- Save/Load option
- Report option: PDF and Excel
- Connect up to 12 units simultaneously to 1 computer
- Remote monitoring option (requires internet connection)
- Cycling/Profiling options
- User calibration options for any microorganism
Applications
- Bacterial cultivation with real-time growth kinetics
- Strain screening
- Temperature stress and fluctuation experiments
- Media screening and optimization
- Synthetic and systems biology
- Inhibition and toxicity tests
Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit 300 a truly multipurpose shaker. The flat platform, covered with a nonslip rubber mat, holds plates, dishes, boxes, etc. The microplate platform will accommodate up to four microplates. The remaining platform has spring loaded retaining bars that adjust to hold flasks, bottles, racks and other containers in place.
Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit 300 to be used for gentle mixing as well as vigorous agitation.
The shaker housing is constructed of heavy gauge, coated steel to reduce motor noise and lend stability to the unit. This compact shaker can be used in temperature controlled environments making it ideal for cold room or incubator use.Specifications for Labnet Orbit 300 Multipurpose Vortexer S2030-300:
Speed range: |
100 - 1200rpm | |
Timer: |
0![]() |
|
Motion/orbit size: |
Horizontally circular, 3 mm | |
Maximum load: |
12.3 lb/5.6 kg | |
Ambient operating range : |
+4° to 65°C | |
Dimensions (W x D x H) : |
10.1 x 12.5 x 5 inches/25.6 x 31.7 x 12.7 cm | |
Weight: |
16 lb/7.3 kg | |
Electrical*: |
120V~, 60 Hz | |
Features of Labnet Orbit 300 Multipurpose Vortexer S2030-300:
- Three versatile platform options
- Shaking, mixing, agitating or vortexing
- Heavy-duty construction
- Safe for cold room or incubator use
Platform Options
S2030-12 | Platform, 30x30cm with non-slip rubber mat |
S2030-13 | Platform, Spring Bar |
S2030-10 | Platform for 4 Microplates |
Capp Rondo Microplate Shaker
Capp Rondo microplate shaker is the ideal choice for any test environment. The footprint is as small as the 96 well plate itself, taking up minimal benchtop space. Interchangeable clamps, delivered with the instrument, allow for a universal fit of commonly used micro- and microtiter plates. Moreover, Capp orbital plate shakers ensure extremely easy plate loading with stable, quiet and long-life operation. Also included is a compact platform for 20 microtubes of 1.5 / 2mL.
The wide speed setting range of 300 up to 1800 rpm, as well as the orbital motion of 2mm (1mm radius), enables performing of numerous applications including PCR, ELISA, enzyme immunoassays, protein synthesis and pharmaceutical profiling. Capp orbital plate shaker can also be used inside cold rooms or fume hoods (up to 40°C).
Specifications |
CappRondo Microplate Shaker |
Speed Setting: |
300 to 1800 rpm |
Digital Display: |
Yes |
Shaking Radius: |
1mm |
Motor Type: |
Brushless DC |
Inbuilt Counter Balance: |
Yes |
Power Supply: |
Universal (90 to 230V, 50/60 Hz) |
Dimensions (W x D x H) |
127 x 85 x 86 mm |
Weight: |
1.36 kg |
Accessories: |
Replaceable clamps to use different types of standard microplates |
Shaker Orbit LS Low Speed
- Economical analog control with easy-turn knobs
- 19 mm orbit for blotting, gel staining and general mixing
- Streamlined design
- Safe for cold room and incubator use
- 1 Year Warranty
The Orbit LS low speed shaker is a high quality, general purpose shaker with economical analog control.
Styled after the other models in the line, the Orbit LS features a streamlined, compact design with easy-access control panel. Electronic controls are utilized for setting speed and time. The knobs used for selecting parameters turn easily and are clearly marked with corresponding values.
A large orbit and low speed make the Orbit LS useful for staining and destaining gels, washing blots and general mixing. The shaker is supplied with a 30 x 30 cm stainles steel flat platform and non-slip rubber mat to keep plates, dishes and other sample containers in place.
Safe for use in temperature controlled environments, the small profile of this shaker makes it ideal for use in incubators such as the Labnet 311 and 611 series.Specifications:
Speed range | 3 - 60 rpm | |
| 20 - 120 min (10 min inc.) or continuous | |
| Circular, 19 mm | |
| 11 lb/5 kg | |
Ambient operating range | +4° to 70°C | |
| 10 x 12.6 x 6.3 in/ 25.5 x 32 x16 cm | |
Weight | 14.5 lb/6.6 kg | |
Electrical | 120V~, 60 Hz or 230V~, 50 Hz |
Microplate Shaker
- Ergonomic design with speed control and timer
- Automatically recovers from power outages
- Wide range of accessories available
- Digital control and LED/LCD display
- Designed and built for continuous use
- Gentle speed up and slow down
- Safe for use inside standard incubators
- No vibration or heat output
- Built for heavy workloads
Specifications:
Model | OS-07UA |
Product Name | Microplate Shaker |
Speed | 150~1000 rpm |
Speed Accuracy | ± 1% (@ ≤ 299 rpm)± 2% (@ > 299 rpm) |
Orbital Diameter | Ø2.5mm (0.1 in.) |
Timer | 0~99hr 59min |
Platform Dimensions | 275 × 235 mm (10.8 × 9.3 in.) |
Capacity | 4×Microplates / 6×Microplates (with OSA15 Large Platform Assembly) / 2×Tube Racks |
Max Load | 4 kg (8.8 lb) |
Display | LED |
Accessories Included in Standard Packaging | Standard Platform with 6 pcs of OSA13 (96-well Microplate Holder) |
Ambient Temperature | 5°C~40°C |
Ambient Relative Humidity | ≤80% |
Power Supply | AC110V, 60Hz |
Max Power | 72W |
Dimensions (WxDxH) | 296 x 440 × 142 mm (11.7 x 17.3 × 5.6 in.) |
Net Weight | 15 kg (33.1 lb) |
Protection Level | IP21 |
Certifications | cCSAus, CE, RoHS, WEEE |
Shaker Orbit 300 Digital
Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit 300 a truly multipurpose shaker. The flat platform, covered with a nonslip rubber mat, holds plates, dishes, boxes, etc. The microplate platform will accommodate up to four microplates. The remaining platform has spring loaded retaining bars that adjust to hold flasks, bottles, racks and other containers in place.Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit 300 to be used for gentle mixing as well as vigorous agitation.
The shaker housing is constructed of heavy gauge, coated steel to reduce motor noise and lend stability to the unit. This compact shaker can be used in temperature controlled environments making it ideal for cold room or incubator use.Specifications:
|
| ||||||||||||||||||
Timer: |
| ||||||||||||||||||
|
| ||||||||||||||||||
|
| ||||||||||||||||||
Ambient operating range : | +4° to 65°C | ||||||||||||||||||
|
| ||||||||||||||||||
Weight: | 16 lb/7.3 kg | ||||||||||||||||||
Electrical*: | 120V~, 60 Hz |