Lab Homogenizers

In need of a homogenizer? We have the handheld or benchtop homogenizers you’re looking for.

With a wide selection of products to choose from, our product line is sure to meet your needs.

If you’re looking for a convenient, but quite powerful, handheld lab homogenizer then the PRO250 is ideal for you while the D1000 handheld homogenizer is perfect for use with microtubes.

When you need to agitate numerous samples at a time, then it may be best to consider the Mini-Beadbeater-16, which can handle four to sixteen samples all at once.

If you have tissue that’s been hard-frozen in liquid nitrogen and need to reduce it to a fine powder, then consider the numerous Bio-Pulverizers in our product line.

Most importantly, we carry Bullet Blenders! Among a ton of other benefits, these homogenizers avoid cross-contamination between samples and sample loss.

Bullet Blender Storm

Bullet Blender® Storm Pro Homogenizer

Shop Now

BeadBlaster 24 Tube Homogenizer

BeadBlaster™ 24 Tube Homogenizer

Shop Now

Bullet Blender Gold 8x50ml

Bullet Blender® Gold+ Homogenizers

Shop Now

|◀ 25 - 36 of 39 ▶|
View:
for Homogenization

Stainless Steel UFO Beads

Stainless steel beads can be used for homogenization of touch samples or for special applications such as bacterial isolation. Cone beads (UFO beads) have a special shape that is great for cutting through particularly fibrous or resilient material.

Cone beads are available in 3.5 mm and 5.6 mm diameters in either bulk packaging (50 mL tubes) or in an RNase-free option (10 mL pack size). These beads are for use only in 5 mL and 50 mL tubes within the appropriate Bullet Blender homogenizer.
 

for Homogenization


Glass Beads

 

Glass beads are ideal for the homogenization of biological samples. Due to the low density of the material, it is suitable for the homogenization of soft tissues and easy-to-lyse cell suspensions. Perfect for research that demands precision and reliability.

 

RNase-free glass beads undergo a special cleaning process. They are guaranteed and certified to be RNase-free.

 

Item#:
ASBULBLEBEADS1
for Homogenization


Zirconium Oxide Beads

Zirconium oxide beads are ideal for the homogenization of biological samples. Due to the lower density of the material, it is suitable for the homogenization of softer samples, such as brain or kidney tissue. Autoclavable in dry cycle.

RNase-free zirconium oxide beads undergo a special cleaning process. They are guaranteed and certified to be RNase-free.

 


Bead Lysis Kit

 

The 2 mL screw cap lysis kits are compatible with other brands of tissue homogenizers.

Each kit contains either zirconium oxide beads or glass beads. DNase & RNase Free.

  • LYSKITPC01 is designed for homogenizing bacteria
  • LYSKITPC1 is designed for homogenizing soft tissue samples
  • LYSKITPC1C2B is designed for homogenizing soft and tough tissue samples
  • LYSKITPC2 is designed for homogenizing tough tissue samples
  • LYSKITPG01 and LYSKITPG05 are designed for homogenizing microorganisms and cell culture samples   

Item#:
ASBULBLNKITS5

Bullet Blender® Tubes

Eppendorf Safe-Lock tubes are 1.5 mL polypropylene microcentrifuge tubes for use in Bullet Blender® Storm (BT24M) and Bullet Blender® 24 Gold (BB24AUP) models.

 

GATOR tubes are 1.5 mL microcentrifuge tubes for use in the Bullet Blender® Gold (BB5EAUP), (BB24AUP), and Bullet Blender® Storm (BT5E), (BT24M), (BT12LT) models. 5 mL GATOR tubes are for use in Bullet Blender® 5E Pro (BT5E) and 5E Gold (BB5EAUP) models. The caps stay tightly sealed even under vigorous agitation. The PCR is clean and free of RNase and DNase.

 

RINO® screw-cap tubes are 1.5 mL microcentrifuge tubes for use in Bullet Blender® Storm (BT24M) and Bullet Blender® 24 Gold (BB24AUP) models. They are made of a special extra-tough polypropylene material, ideal for vigorous homogenization. They are also transparent, allowing you to visualize your samples! Sterile & RNase free.

*Use only with RINO® lid gasket. RINO® tubes should not be centrifuged at speeds higher than 14,000 RCF with beads inside, as the weight of the beads can cause the tubes to leak.

 

HIPPO skirted, self-standing, 50 mL tubes are ideal for use in our 50 mL Bullet Blender® models, including the 50 Gold+ (BB50AUP), and 50 DX (BB50DXP) models. HIPPO Tubes can hold substantial amounts and are exceptionally durable. Caps remain tightly sealed on the tubes, even after vigorous agitation. DNAse, RNAse, and pyrogen free.
 

Item#:
ASBBTUBES
115 volt, with Safety Shield

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time.


The Mini-BeadBeater-16 disrupts microbial cells and plant and animal tissue by violently agitating four to sixteen 2 ml screw-cap microvials containing small glass, ceramic or steel beads and disruption buffer. Even resistant samples like yeast, spores or fibrous tissue are completely homogenized around 3 minutes in 0.1 to 1 ml of extraction medium. The non-foaming, aerosol-free method preserves enzymes and organelles. In the presence of nucleic acid extraction media such as phenol, Gu-SCN or a commercial kit solution, DNA or RNA is recovered in the highest possible yield. The method is ideal for PAGE, PCR applications and diagnostics using antibody or oligonucleotide probes. Because the beads and vials are disposable, there is absolutely Zero cross-contamination between samples - essential for PCR techniques.

Specifications

  • Power: 115 volts, 60 Hz, 7.5 amps or 230 volts, 50Hz, 3.7 amps.
  • 10' D X 16' W X 12' H, 40 lbs.
  • Shaking pattern: Uses proven, more efficient near horizontal vial orientation with shaking motion top-to-bottom (not side-to-side or vortex-like) shaking patterns.
  • Capacity: four to sixteen screw-cap microvials (0.5, 1.5 and 2.0 ml) each handling 1 to 400 mg (wet weight) bio-sample.
  • Shaking speed: 3450 oscillations/min.
  • Throw or vial displacement: 0.75 inches.
  • Timer: 0-5 minute digital, with auto reset.
  • Removable vial-holding cassette.
  • No imposed motor cool-down-time between each sample run.
  • The Mini-BeadBeater-16 uses standard screw-cap plastic microvials. Stainless steel microvials or a special reinforced polypropylene microvial (XXTuff vials) are available when dry- or cryo-milling with steel beads. Eight 7 ml vials can be processed with an accessory holding ring
Item#:
607
Your Price:
3000.00
Each


Tissue-Tearor

AWAY FROM ELECTIRCAL LINES? The model 780CL Cordless Tissue-Tearor includes a cordless, high speed motor, one probe of your choice, one rechargable 9.6 volt battery pack and a plug-in charger. The maximum speed of the 780CL is slightly slower than the line-operated TissueTearor (25,000 vs 35,000 rpm), it is quite adequate for homogenizing soft tissue like muscle, liver, brain, etc. 

  • Use for mixing, emulsification, shredding, or chopping.
  • Practical answer for small samples.
  • Easy to hold and light weight for one hand operation. Can also be stand mounted.
  • Autoclavable stainless steel probes. Inert to aggressive solutions.
  • All probes are interchangable probes and are easily removed for cleanup.
  • High speed motor. Speed control from 5,000 to 25,000 rpm.

The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disperse, and emulsify samples in 0.2 - 1000 mL of liquid. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 25,000 rpm. The material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared and disintegrated by high frequency mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
Unlike most other Brands of rotor/stator type homogenizers, the Tissue-Tearor comes complete - that is, with both a motor and a probe (aka, generator, dispersing tool) - both included in one price.


Specifications

  • Sample Volume Range: 0.3 to 1000 ml, depending on the probe selected (see table below).
  • Universal Motor: 120 VAC, 138 watts or , for overseas applications, 230VAC2
  • Variable Speed: 5,000 to 25,000 rpm, incremented by 5000 rpm.
  • Probes made of Type 316 Stainless Steel with flurocarbon bushings.
  • Weight: Approximately 1/2 Kg.
Item #Practical Working RangeProbe DiameterWorking Probe Length
985370-040.5 - 5.0 mL0.17 In. |4.5 mm1.89 In. | 4.80 cm
985370-071 - 50 mL0.28 In. | 7 mm3.27 In. | 8.30 cm
985370-145 - 1000 mL0.55 In. |14 mm5.20 In. | 13.2 cm
985370-XL1 - 50 mL (use w/ 50 mL tubes)0.28 In. | 7 mm4.29 In. | 10.9 cm
 
Item#:
ASHOMHD1

Offering plenty of power and useful features, the 115V Bio-Gen PRO200 homogenizer has a 144 watt, high-torque motor with a variable speed adjustment, allowing for homogenization in mere seconds and a maximum noise level of only 68 dB. A Seperate ON/OFF switch conveniently allows for the slide switch speed control to remain at your ideal homogenizing speed.

With PRO QUICK CONNECTrotor stator generators, ranging in size from 5mm to 20mm in diameter, or with PRO's SAFETY SEAL and Sealed Tube (ST) Series homogenizer Chamber Assemblies, the Bio-Gen PRO200 homogenizer is able to homogenize samples with volumes as small as 0.03 ml or as large as 1 L.

The Bio-Gen PRO200 homogenizer is ideal for using our Multi-Gen 7 stainless steel generators for low-cost repeat homogenization without the risk of cross contamination.   

*Stand and Generators sold separately

2 year warranty

Specifications

Dimensions 115V
2.15 x 7.875 x 1.98 in
5.4 x 20.0 x 5.03 cm
(w x h x d)
Weight 1.4 lb / 0.6 kg
Speed Range 5,000 - 35,000 rpm
Power 144 W
Sample Volume 0.03 ml - 1 L
Noise Rating 68 dB
Speed Control analog variable speed
Item#:
01-01200
Your Price:
1024.00
Each

Benchmark™ BenchMasher™ 400 Paddle Blender

  • Contamination free mixing/homogenizing of samples
  • Touch screen control with variable mixing speed and temperature control
  • Adjustable stroke length
  • Built in UV light for chamber decontamination

The BenchMasher™ provides fast and effective mixing, ensuring consistent homogenization. It is ideal for preparation of samples were eliminating contamination is critical, such as pathogen and microbial detection in food and water filters. However, its use is not limited to those areas - the BenchMasher™ has applications anywhere larger solid samples need broken down or products such as powders and polymers need mixed.

Samples up to 400 mL are conveniently loaded in the sterile blender bags which are sealed upon closing the door. Mixing paddles rapidly strike the bags, producing thorough mixing and homogenization without ever directly contacting the sample. Programming is user friendly - mixing speed and cycle time are easily adjusted on the large, full color touch screen. Paddle position can be adjusted to ensure efficient processing of samples. For applications requiring thermal regulation (such as Trichinella testing in meat) the chamber can be heated and maintained at temperatures up to 65°C.

The door is removable for access to the chamber and stainless steel mixing paddles. Each paddle includes a convenient rubber cover that is easily removed or replaced. A UV light (254 nm) is built into the chamber and can be activated at any time to perform complete decontamination.



Specifications

Speed

3-12 strokes/second

Timer

1 second to 100 minutes or continuous

Paddle distance

0 to 50 mm

Temperature range

Ambient to 65°C

Ambient operating temperature

2°C to 35°C

Bag size (WxH)

16-18 cm x 25-30 cm

UV Bulb

254 nm

Dimensions (WxDxH)

9 x 16.5 x 14 in. | 23 x 42 x 33 cm

Weight

42 lb | 19 kg

Electrical

120 V, 50 Hz

Warranty

2 years

pack for soft tissues
This item has been discontinued and replaced by item 

Bead sample pack with 8 types of beads for homogenizing soft tissues: 0.5 and 1.0 mm glass beads (GB05, GB10), 0.5, 1.0, and 2.0 mm zirconium silicate beads (ZRSB05, ZRSB10, and ZRSB20), and 0.5, 1.0, and 2.0 mm zirconium oxide beads (ZROB05, ZROB10, and ZROB20). 10 mL of each.

Your Price:
144.20
Each
This item is discontinued
0.9-2.0mm blend Rnase-free,

0.9 - 2.0 mm RNase-free stainless steel blend, density is 7.9 g/cc, 4 mL package.

Your Price:
81.80
Each

Benchmark™ BeadBlaster 96 | Ball-Mill Homogenizer for Plates, Tubes and Jars
  • Wet, dry or cryogrinding
  • Accepts a variety of tubes, plates and jars
  • Large, digital touch screen control panel
  • See-though safety lid

The BeadBlaster™ 96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas, including biological research, environmental testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a variety of materials are available.

Wet homogenization, dry grinding and cryogrinding can all be performed with the BeadBlaster™ 96. The arced motion of the sample holders and powerful motor allow most samples to be processed in 1 minute or less. All parameters are digitally controlled through the large touch screen and 9 programs can be stored in memory.

The safety cover lifts up for easy access to the sample holders and automatically locks during operation. The wrap-around design of the clear acrylic lid allows for visualization during homogenization.

Specifications

 
Speed Range180 to 1800 rpm
Speed Increment100 rpm
Cycle Duration1 sec to 59 min. 59 sec
Pause1 sec to 59 min. 59 sec
Cycles99
Programs9
Dimensions
(W x D x H)
13.19 x 19.68 x 14.37 In.
335 x 500 x 365 mm
Weight141 lbs. | 64 kg.
Electrical120 V, 50 Hz
Warranty2 years

|◀ 25 - 36 of 39 ▶|
View: