Looking for replacement tubes? Check out PR1MA™ Microcentrifuge Tubes here! 

• High centrifuging to 20,000 x G
• Freezable (-80°C)
• Autoclavable
• Capacity: 1.5 mL
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Attached flat snap caps

SuperSlik® low retention microcentrifuge tubes have a low protein binding surface that minimizes sample loss during sample manipulation.  Ideal for applications such as mass spectrometry (ms), immunoprecipitation (IP), co-immunoprecipitation (Co-IP).  Leakproof snap caps may be penetrated by a syringe and will no pop open during autoclaving.  Compatible with many thermal cyclers and able to tolerate centrifuge speeds up to 20,000 RCF.

Proudly made in the USA! Click here for more made in America products!
  

Labcon SuperSpin® Microcentrifuge Tubes

• Ultra-high centrifuging up to 40,000 x G*
• Optically clear resin
• Resin will not interfere with DNA or PCR
• For Phenol/Chloroform vortexing
• Reduced Thumb Force
• Autoclavable (122°C) and freezable (-80°C)
• Packaged in resealable bags
• Tubes have flat pierceable caps and a side writing surface
• Graduated

SuperSpin® microcentrifuge tubes were designed with the ability to extract DNA from samples and then amplify that DNA with reliable results in mind.  They can be trusted to spin at high rates and can be opened and closed easily many times to add or remove agents.  The interior surfaces are ultra-smooth with low retention.  The tubes are clear enough to be use in spectrophotometers and have no extractables at the wavelength ranges you use to detect DNA. SuperSpin® microcentrifuge tubes are more than twice as effective at transmitting light than most brands of micro centrifuge tubes.

*Maximum G-force can be affected by organic solvents, multiple spin cycles, or low temperature storage.

Proudly made in the USA! Click here for more made in America products!
 

Labcon C-Pette™ Blood Transfer Dispenser

• For safe and efficient blood dispensing
• Ideal for Point-of-Care (POC) use with any analyzer
• Minimizes aerosols
• Reduces the risk of lab-acquired infections
• Stainless steel canula

C-Pette™ blood collection tube dispenser for point of care testing instruments. Dispenses one drop of blood onto test cartridge or cassette. Dispenses blood drops easy with no need to open collection tubes. Fits standard glass or plastic blood tubes with rubber stoppers. Made of polystyrene and Stainless steel. Not Autoclavable. 

Proudly made in the USA! Click here for more made in America products!
  

Labcon Tip Top™ Dispenser Caps

• Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
• Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
• Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
• Medical Grade Resins: USP Class medical grade resins and packaging.

Safe Dispensing of Blood Samples
 
Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16 mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.

Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.

The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.

Fits standard 13 x 100 and 16 x 100 collection tubes.

Proudly made in the USA! Click here for more made in America products!
  

Lab Armor® Beads

- Watch the video in the link above to learn more! 

Lab Armor Beads are dry metallic beads that replace water/ice/oil/sand in baths, giving old equipment a cool, shiny, state-of-the-art upgrade. Eliminates water bath contamination, harmful germicides, and unpleasant maintenance. 

Beads are dry and naturally more resistant to microbial growth than water, and therefore, are less likely to harbor and contribute to transmitting microorganisms in the laboratory. 
  

Lab Armor Beads will help you save time and money. No more hassling with emptying, cleaning, and refilling water baths.

The bath stays on so there is no need to plan around warm-up times. Lab Armor Beads eliminate the worry about low water burnout because there is no water to evaporate.
 

Other Benefits of Lab Armor® Beads: 

• Cleaner working environment.
• Greater organization capabilities as samples are held in place without racks or other accessories.
• Environmentally friendly. 

Why Choose Lab Armor Beads?
 

Any Vessel, Any Angle

Lab Armor Beads prevent distorted data and dangers resulting from inaccurate temperatures, evaporated lab water baths, and water-exposed contaminated samples. The Beads are designed to decrease microbial contamination that can ruin experiments or lead to safety issues in the laboratory.

Organized and Secure

Lab Armor Beads flow fluidly and can conform to all sizes and shapes of vessels placed within the bath. Vessels that are prone to tipping over or floating away no longer require racks, floats, or bottleneck weights to secure them in place. Sample vessels can be conveniently buried into the beads to avoid temperature gradients associated with exposure to room temperature air. Bottles will rest on the surface and conical tubes will stay firmly in place in less than 1/2 inch of Beads.

Specifications

• Temperature range: -80°C to 180°C
• High thermal conductivity
• Non-toxic, non-vaporizing, antimicrobial
• No daily requirement for biocides, germicides, or other cleaners
• No gray water
• Smooth rounded shape allows fluidity and will conform to many sizes and shapes of vessels
• No racks, floats or weights required to hold items in place
• Recyclable*
• Weight 4 Lbs. (1.81 kg) per Liter 

*Must follow biohazard disposal protocols if beads have been used in biohazardous work.

Proudly made in the USA! Click here for more made in America products!
 

15 mL and 50 mL Conical Tube Freezer Boxes      

Easily organize and store your conical tubes using our 15 mL and 50 mL Freezer Boxes. Durable polypropylene protects your samples, and a unique pull tab enables safe removal from freezer racks. Ideal for laboratories working with many samples.

• Durable polypropylene construction
• Operating Temperature between -90°C and 121°C
• Autoclavable to maintain sterilization and prevent contamination
• Numerical index on grid allows for quick retrieval and easy organization
• Clear lift-off lids offer convenient sample viewing 

Specifications
 

Item #	5570-02	5580-01
Temp. Range	-90°C to 121°C
Color	Green	Blue
Indexing	1 to 36	1 to 16
Dims. w/ Lid (D x W x H)	144 x 144 x 127 mm 5.67 x 5.67 x 5 in.
Dims. w/o Lid (D x W x H)	144 x 144 x 102 mm 5.67 x 5.67 x 4.02 in.
Formation	36 Wells, 6 x 6	16 Wells, 4 x 4
Max. Tube Dims.	18 x 121 mm 0.71 in. x 4.76 in.	30 x 121 mm 1.18 x 4.76 in.
Material	Polypropylene

 

Proudly made in the USA! Click here for more made in America products!
 

Labcon LTS Style Low Binding Tips - Bulk Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uLL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 uL UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors 

Packaging

Proudly made in the USA! Click here for more made in America products!
 

Labcon LTS Style Low Binding Tips - Hinged Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors

Packaging

Bulk Pack
Tips are supplied in one large bag inside a corrugated container. These are not recommended for long term storage due to warping.

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse Refills

Proudly made in the USA! Click here for more made in America products!
 

Labcon Eclipse™ Macro Volume Pipette Tips

• Designed to fit macro volume pipettors
• Made of clear, 100% polypropylene
• Autoclavable (122°C)
• Available in resealable bags or composite racks

• 1025 - 5 mL Graduated Macro Pipette Tips for Gilson™ and Rainin™ Macro Pipettors
• 1027 - 5 mL Graduated Macro Pipette Tips for Sartorius™ and Eppendorf™ Pipettors
• 1028 - 5 mL Macro Pipette Tips for Macro Pipettors
• 1029 - 10 mL Pipette Tips for Macro Pipettors

Proudly made in the USA! Click here for more made in America products!
  

Labcon APT™ Automation Pipette Tips

Labcon automation pipet tips APT™ for Beckman® FX, NX and other brands are designed and tested to fit your workstation. Made from pure pre-tested medical grade resins to ensure the integrity of your work. Each lot is tested and certified free of ATP, RNase/DNase (Nuclease), and Endotoxins (non-pyrogenic). Resins are pre-tested with a USP test method to ensure they are free of Oleamide and Phalates. Unlike tips sold as “pre-sterile” these tips use a validated medical grade sterilization process. You can use these tips in diagnostics, regulated testing, and medical screening procedures.

Labcon Robotic Pipette Tips are made of virgin polypropylene and furnished pre-racked in extra-heavy automation grade polypropylene racks and are autoclavable.

• 8005 – P30 AP384 Style, 30 uL capacity
• 8014 – P20 AP96 Style, 100 uL capacity
• 8114 – P20 AP96 Style, with Filter, 100 uL capacity
• 8024 – P50XL AP96 Style, 90 uL capacity
• 8017 – P250XL AP96 Style, 220 uL capacity
• 8117 – P250XL AP96 Style, with Filter, 220 uL capacity

Proudly made in the USA! Click here for more made in America products!
  

Gel-Loading Pipette Tips

Gel-Loading Pipette Tips are designed for precise and accurate sample loading into gels.

• Round or at tip options to meet all customer preferences
• Short body 200 μL available in bulk packaging
• Patented press-to-open racks provide easy, one-handed opening
• Universal fit to accommodate most pipettor brands
• Multichannel-friendly with a standard 96-tip arrangement
• Small pack sizes—preferred by more researchers
• Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free. Sterile product is certified endotoxin-free

Specifications
 

Item #	Description	Packaging
4817-00	10µL, 0.57mm Round Tips	96/rk, 2 rks/pk, 5 pks/cs
4817-0A	10µL, 0.37mm Flattened Tips	96/rk, 2 rks/pk, 5 pks/cs
4817-0B	10µL, 0.17mm Flattened Tips	96/rk, 2 rks/pk, 5 pks/cs
4817-S0	10µL Gel-Loading Tips, 0.57mm Round, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4817-SA	10µL Gel-Loading Tips, 0.37mm Flat, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4817-SB	10µL Gel-Loading Tips, 0.17mm Flat, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4817-SF	10µL Filter Gel Tips 0.57mm Round, Racked, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4837-00	200µL Gel-Loading Tips, 0.57mm Round, Racked	96/rk, 2 rks/pk, 5 pks/cs
4837-0A	200µL Gel Loading Tips, 0.37mm Flat, Racked	96/rk, 2 rks/pk, 5 pks/cs
4837-0B	200µL Gel-loading Tips, 0.17mm Flat, Racked	96/rk, 2 rks/pk, 5 pks/cs
4837-S0	200µL Gel-Loading Tips, 0.57mm Round, Sterile, Racked	96/rk, 2 rks/pk, 5 pks/cs
4837-SA	200µL Gel-Loading Tips, 0.37mm Flat, Sterile, Racked	96/rk, 2 rks/pk, 5 pks/cs
4837-SB	200µL Gel-Loading Tips, 0.17mm Flat, Sterile, Racked	96/rk, 2 rks/pk, 5 pks/cs
4840-00	200µL Gel-Loading Tips, 0.57mm Stepped (MBP/QSP Style)	1,000/bg, 10 bgs/cs
4847-00	200µL Gel Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked	96/rk, 2 rks/pk, 5 pks/cs
4847-S0	200µL Gel Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4847-AF	20µL Gel Filter Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile	96/rk, 2 rks/pk, 5 pks/cs
4847-BF	100µL Gel Filter Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile	96/rk, 2 rks/pk, 5 pks/cs

 

Proudly made in the USA! Click here for more made in America products!
 

Labcon Zap™ Slik Aerosol Extend Length Pipette Tips

Packaging

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Proudly made in the USA! Click here for more made in America products!