Click to shop new and improved eXTReme™ 2 Seal Extra Strong Sealing Film

eXTReme™ Seal Extra Strong Sealing Film

eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.

Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.

• Certified DNase- & RNase- free
• Ideal for use with raised-rim and non-skirted PCR plates
• Available in a larger cut for flat-top semi-skirted and full-skirted PCR plates: eXTReme™ Seal, Large

Application

• PCR
• Robotics

Helpful Tips

• Selection of the proper film size will minimize evaporation
• The film should not overhang or ride up the wall of a raised-rim plate
• More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
• End-tab removal before thermal cycling is highly recommended

DuraSeal™ Sealing Film

• Durable, heat-resistant, solvent-proof laboratory sealing film
• Chemically resistant
• Heat resistant & Microwave compatible
• Tight sealing
• Tear resistant

DuraSeal™ is easy to use. There is no inter-leaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5 mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges.

Permeability Information

• Oxygen = 125cc/100in2/24hrs at 23°C
• Carbon Dioxide = 1300cc/100in2/24hrs at 23°C
• Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.

ContainerSeal™ Sealing Tape

ContainerSeal™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform around the irregular perimeters of containers lids and covers to form a tight seal. ContainerSeal™ will block water vapor loss, reduce the rate of gas exchange and prevent the entry of contaminants and can be easily removed from most surfaces without leaving adhesive residue.

Specifications
 

Length	1,296 In. | 32.92 mm
Width	0.75 In. | 19.05 mm
Color	Yellow
U of M	Roll

 

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Chroma Deluxe Dual Cool Vertical Protein Electrophoresis System

Ergonomic design offers easier handling and sample introduction.

• Maximum glass plate size 18 x 16 cm
• Gels are fully submerged for greater temperature equilibration
• Produces straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Accommodates denaturing and native polyacrylamide gels, and the second dimension of 2-D electrophoresis
• Run gels at uniform temperature from 1 to 45°C
• A wide array of accessories enables you to tailor gel configurations to your needs 

Hoefer® Chroma Deluxe Complete Unit (SE600X-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 16 cm, 6/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick, 2 cm wide, 4pk

Hoefer® Chroma Deluxe Basic Unit (SE600X)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm
Weight	16.98 lb | 7.70 kg

1 x 8 FilmStrips™

For Sealing Only One 8-well Row of a 96-well Plate.

Hoefer® Tall Standard Dual Cool Vertical Protein Electrophoresis System

Taller vertical format accommodates 24 cm long gels for increased resolution.

• Maximum glass plate size 18 x 24 cm
• Produce straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Run gels at uniform temperature from 1 to 45°C
• Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
• A wide array of accessories allows you to tailor gel configurations to your needs  

Hoefer® Tall Standard Complete Unit (SE660-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 24 cm, 6/pk
• Clamp Assemblies, 8 cm, 4/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate-Alignment Template, 1/ea
• Wonder Wedge™-Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick (2 cm wide), 4/pk
• Lower Buffer Chamber, 1/ea 

Hoefer® Tall Standard Basic Unit (SE660)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 24 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 9.45, 7.09 x 6.30, or 7.09 x 3.15 In. 18 x 24, 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 14.57 In. | 14 x 32 x 37 cm
Weight	19.40 lb | 8.80 kg

Hoefer® Standard Dual Cooled Vertical Protein Electrophoresis System

Standard vertical format for 18 cm long gels.

• Maximum glass plate size 18 x 16 cm
• Produce straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Run gels at uniform temperature from 1 to 45°C
• Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
• A wide array of accessories allows you to tailor gel configurations to your needs 

Hoefer® Standard Complete Unit (SE600-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 16 cm, 6/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick, 2 cm wide, 4/pk

Hoefer® Standard Basic Unit (SE600)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm
Weight	15.43 lb | 7.00 kg

AbsorbMax™ Black Vinyl Sealing Film

• Minimizes background fluorescence and cross talk between plate wells
• Ideal as a back seal for black plates with clear well bottoms for top reading measurements
• Absorbs stray light, reducing the background caused by light scatter
• Protects light sensitive samples from degradation
• Features a single split liner for easy application

Applications

• Fluorescence assays
• Light sensitive sample protection

Temp. Range

• -40°C to +80°C

BrightMax™ Sealing Film

White, light-reflecting, vinyl sealing film designed for use with white microplates.

• The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
• Maximizes intensity and signal-to-noise ratios in luminescence assays
• May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
• Features a single split liner for easy application

Applications

• Luminescence
• Fluorescence
• Microscopy

• -40°C to +80°C

Plate-Sealing Roller

The plate-sealing roller features a smooth spinning, thermoplastic elastomer sealing surface with a durable plated metal handle.

• Reusable, autoclavable
• Provides a large 4 inch (10.16 cm) wide sealing surface
• A 10 minute or greater dwell me at room temperature before processing increases the film-to-plate bond

Film-Sealing Paddles