• Low binding to protect sample integrity
• -80°C to 121°C, 24,000 x g
• 100% Virgin Polypropylene
• Side Gated - No More Sore Thumbs!
• DNase/RNase-Free, non-sterile, natural

New sterile microtubes from MIDSCI are manufactured under clean room conditions, using only BioClear co-polymer, an advanced polypropylene that maximizes clarity, centrifugal strength (tested up to 28,000xg) and the usable Temp Range (-90°C to +121°C).

The oversized tube cap (with frosted marking surface), combined with the unique ring & groove closure, enhances the security of the liquid-tight seal, while minimizing the required locking forces for a more ergonomic opening/closing of the tube caps.

All tubes are RNase, DNase and pyrogen free.

• Sterile comes standard - by electron beam radiation

• Self-Standing bag - with gusseted bottom

• Stop-Pops supplied - 10 cap locks in every bag

• Extremely low-binding polymer
• Exceptional clarity
• Certified DNAse/RNAse, nucleic acid, and pyrogen-FREE
• Boil-proof
• Autoclavable
• Larger cap for easy labeling
• Pierceable cap
• RCF: 20,000 x g
• -176°C to 121°C

Flip Top Vials

These new flat-bottomed vials are made of natural polypropylene. They feature a one-piece design that includes an integral hinged cap and can be used in digestion equipment/protocols.

• Self-standing, flat bottom design ensures the tube remains upright and accessible
• Attached caps provide a leak-proof seal
• Molded graduations allow for accurate and easy measurement

Specifications
 

We Have Improved The Best Tube On The Market!

• -80°C to 121°C
• 24,000 x g
• 100% Virgin Polypropylene
• Small Cap
• Side Gated - No More Sore Thumbs!
• Redesigned Lid, Easier To Open
• 500 Per Case!
• DNase & RNase Free!
• Research grade tubes you can boil and use with confidence!
• Colors also available: Red, Yellow, Blue, Green, Amber, Purple, or Assorted. MIX OR MATCH!

• Spin up to 70,000 x g
• Disposable - avoid potential contamination from reusing tubes
• Capped tubes have frosted surface for easy labeling
• Sterile

Labcon SuperClear® 5 mL Centrifuge Tubes with Attached Caps

• Attached flat snap caps
• Molded graduations
• Writing surface
• Centrifuging to 25,000 x G
• Autoclavable (122°C) and freezable (-80°C)

5 mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15 mL tubes. Designed to fit the same rotors as our 15 mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes.

The interior surfaces are ultra-smooth with low retention characteristics. Lab testing confirms the superior performance of SuperClear® tubes in light transmission compared to other brands. SuperClear® tubes are more than twice as effective at transmitting light than other brands of 5 mL centrifuge tubes.

SuperClear® tubes feature an extra-thick and durable wall that can withstand centrifugation to 25,000 x G, more than twice some other brands. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces.

Tubes have flat, pierceable caps and a side writing surface and are packaged In resealable bags.

Proudly made in the USA! Click here for more made in America products!
 

Labcon Screw Caps with O-Rings for SuperClear® Tubes
 
For Labcon SuperClear® Screw Cap Microcentrifuge Tubes. 

• Ethylene propylene O-ring
• Endotoxin Free (non-pyrogenic)
• Polyethylene USP Class VI resin
• Autoclavable
• Caps are in resealable bags
  

Labcon SuperClear® Microcentrifuge Tubes

• Optically clear resin
• High centrifuging to 20,000 x G
• ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)

SuperClear® tubes feature an ultra-clear polypropylene resin that gives you a clear view of the pellet as well as correct color rendition.  Designed to be sustainable, these tubes use less plastic than most other tubes and include ergonomic caps with smooth surfaces that help reduce the potential for repetitive strain injury.  The cap also includes a special 90° hinge that makes the cap easier to close while on handed pipetting.  These tubes are designed to stay closed during boiling to protect your sample.

Available in 0.5 mL, 1.7 mL, and 2.0 mL sizes that fit all stand high capacity rotors.  Tubes with snap caps have pierceable caps, a side writing surface and graduations.  Autoclavable (122°C) and freezable (-80°C).

Proudly made in the USA! Click here for more made in America products!
 

Labcon ViewPoint™ Thermochromic Microcentrifuge Tubes

• ViewPoint™ Thermochromic
• Real-time temperature signaling
• Reversibly transition from clear to light blue at 4°C with full dark blue transition at 0°C
• 1.5 mL
• With flat easy open attached snap caps; side graduations, and frosted writing surface
• Protease, Human DNA, ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
• Sperm Motility Assay (SMA) Mouse Embryo Assay (MEA) validated safe for cell culture
• Polypropylene USP Class VI resin
• Ultra high centrifuging to 40,000 x G
• Freezable to -80°C
• Protease, Human DNA, ATP, RNase/DNase and Endotoxin Free (non-pyrogenic), Sperm Motility Assay (SMA) Mouse Embryo Assay (MEA) validated safe for cell culture
  
• Greener Choice Claims

• Renewable Energy
• Certifications and Seals of Approval
• Free-of a substance that causes environmental harm
• Non-Toxic
• Recyclable

Specifications
 

Cap Style	Snap Cap
Autoclavable	Yes
Color	Clear to Blue color change at 0ºC to 4ºC
Max. Force	40,000 RCT
Packaging	500/pk, 2 pks/cs
Shipping Condition	RT
Graduated	Yes
Certifications/Compliance	ISO 9001:2015; FDA CFR21 GMP; CE IVD Conformity
Capacity	1.5 mL
Material	Polypropylene USP Class VI Resin
Application	Centrifugation
Temp. Range	Freezable to -80ºC
Sterility	Non-Sterile
Product Line	ViewPoint™

Proudly made in the USA! Click here for more made in America products!