Click to shop new and improved eXTReme™ 2 Seal Extra Strong Sealing Film

eXTReme™ Seal Extra Strong Sealing Film

eXTReme™ Seal features an extra-strong thick adhesive to minimize evaporation, yet removes easily without leaving residue on the plate.

Features chamfered corners to eliminate plate overhang for robotics applications and tight storage conditions.

• Certified DNase- & RNase- free
• Ideal for use with raised-rim and non-skirted PCR plates
• Available in a larger cut for flat-top semi-skirted and full-skirted PCR plates: eXTReme™ Seal, Large

Application

• PCR
• Robotics

Helpful Tips

• Selection of the proper film size will minimize evaporation
• The film should not overhang or ride up the wall of a raised-rim plate
• More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
• End-tab removal before thermal cycling is highly recommended

DuraSeal™ Sealing Film

• Durable, heat-resistant, solvent-proof laboratory sealing film
• Chemically resistant
• Heat resistant & Microwave compatible
• Tight sealing
• Tear resistant

DuraSeal™ is easy to use. There is no inter-leaf paper to strip away, just stretch the film symmetrically over a container opening and the 1.5 mil thick film contracts inwardly around the opening or neck of the container to provide a drum-tight, water-proof seal. The film can be elongated 500-800% before breakage. The film clings to itself, especially after stretching so the free edges of the film may be stretched around the container to secure the container edges.

Permeability Information

• Oxygen = 125cc/100in2/24hrs at 23°C
• Carbon Dioxide = 1300cc/100in2/24hrs at 23°C
• Water Vapor = 1.0g/100in2/24hrs at 38°C and 90% R.H.

ContainerSeal™ Sealing Tape

ContainerSeal™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform around the irregular perimeters of containers lids and covers to form a tight seal. ContainerSeal™ will block water vapor loss, reduce the rate of gas exchange and prevent the entry of contaminants and can be easily removed from most surfaces without leaving adhesive residue.

Specifications
 

Length	1,296 In. | 32.92 mm
Width	0.75 In. | 19.05 mm
Color	Yellow
U of M	Roll

 

Proudly made in the USA! Click here for more made in America products!
  

1 x 8 FilmStrips™

For Sealing Only One 8-well Row of a 96-well Plate.

Plate-Sealing Roller

The plate-sealing roller features a smooth spinning, thermoplastic elastomer sealing surface with a durable plated metal handle.

• Reusable, autoclavable
• Provides a large 4 inch (10.16 cm) wide sealing surface
• A 10 minute or greater dwell me at room temperature before processing increases the film-to-plate bond

AbsorbMax™ Black Vinyl Sealing Film

• Minimizes background fluorescence and cross talk between plate wells
• Ideal as a back seal for black plates with clear well bottoms for top reading measurements
• Absorbs stray light, reducing the background caused by light scatter
• Protects light sensitive samples from degradation
• Features a single split liner for easy application

Applications

• Fluorescence assays
• Light sensitive sample protection

Temp. Range

• -40°C to +80°C

Film-Sealing Paddles

BrightMax™ Sealing Film

White, light-reflecting, vinyl sealing film designed for use with white microplates.

• The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
• Maximizes intensity and signal-to-noise ratios in luminescence assays
• May be used as a backing matrix for microscopy of punch-out samples for filter plates (e.g. ELISPOT assays)
• Features a single split liner for easy application

Applications

• Luminescence
• Fluorescence
• Microscopy

• -40°C to +80°C

Cool Safe Sample Chill System 

• Versatile - Designed for 0.2ml tubes (strips or trays), 96-well and 384-well microplates, 0.5 mL, 1.5 mL, 5 mL tubes. 
• Specially Formulated - Cool Bricks maintain a constant temperature (1°C or 10°C) for up to 10 hours. 
• Quality Engineering - Each aluminum Cool Chamber surrounds tubes to guarantee sustained cold temperatures. 
• Durable - The CoolSafe box is made of triple density expanded polystyrene and molded under extreme pressure creating a durable container that guarantees temperature stability. 
• Easy To Use - Easily interchange Cool Chambers and Cool Bricks for different sized tubes.

Proudly made in the USA! Click here for more made in America products!
  

Labcon 24 and 48 Place Bench Top Racks

• Hold 1.5 mL, 1.7 mL, and 2.0 mL microtubes
• Freezable (-190°C) and autoclavable (122°C)
• Racks float in water baths

Labcon 24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5 mL and 2.0 mL tubes. These racks fit into Labcon pipette tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can incorporate dry ice for use with frozen samples on the bench.

Specifications
 

Material	100% Polypropylene
Grade	Medical
Rating	USP Class VI
Color	White
Length	Various
Fits	1.5 to 2 mL Tubes
Approved Use	Medical, Research, Industrial, Food and Beverage

Proudly made in the USA! Click here for more made in America products!