S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The Rotocycler 72 facilitates the handling and insertion of caps on the tubes by offering a special solid aluminum loading rack. This rack can hold up to 18 x 0.1 mL tube strips for a total of 72 tubes. Other cavities can hold larger reaction tubes. To keep reactions cool during setup, simply place the rack in a refrigerated area. For easy reference, all wells are numbered. Color coding is made possible by inserting a Capinsert in up to two locations on the rack.
Includes: Rotocycler 72 and 500 assorted color coding inserts
Accessories for the Rotocycler 72
T319-4N |
Rotocycler 0.1 mL Tube and Cap Strips for Qiagen Rotor-Gene Q |
T319-72D2 |
Rotocycler 72 Rotor with 100 µL wells for Qiagen Rotor-Gene Q |
T319-100D1 |
Rotocycler 100 Rotor with 25 µL wells for Qiagen Rotor-Gene Q |
FoilSeal™ RollMate™ Dispenser +1 Roll of FoilSeal™ Film, 500 Pre-Scored Sheets
- Certified DNase- & RNase- free
- Pierceable with a pipet tip or robotic probe for direct sample recovery
- 2.0mil aluminum foil removes easily without tearing
- The conformable nature of foil allows for the visual verification of the seal’s security around each well
- Not recommended for long-term cold storage
- PCR
- Light sensitive assays
- Short-term storage
- Robotics
- -20°C to +120°C
- End-tab removal before thermal cycling is highly recommended
- Remove diagonally from a corner to prevent tearing
ThermalSeal® 2™ and ThermalSeal® Advanced Sealing Film
- Certified DNase- & RNase- free
- Ideal for use with flat-top, semi-skirted and full-skirted PCR plates
- Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates
- Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering
- Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® Advanced
- PCR
- -40°C to +120°C
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
AbsorbMax™ Black Vinyl Sealing Film for Black Microplates
AbsorbMax™ is a black vinyl film that can be applied to either the top or bottom of the plate.- Minimizes background fluorescence and cross talk between plate wells
- Ideal as a back seal for black plates with clear well bottoms for top reading measurements
- Absorbs stray light, reducing the background caused by light scatter
- Protects light sensitive samples from degradation
- Features a single split liner for easy application
Applications
- Fluorescence assays
- Light sensitive sample protection
Temperature Range
- -40°C to +80°C
Zone-Free™
Zone-Free is a multilayer film consisting of a top pierceable clear polyethylene film and a white polypropylene sublayer with 96 circular areas void of adhesive.
- Pierceable
- Offers excellent chemical resistance
- Samples have minimal contact with adhesive due to the adhesive-free zones
The RotoCycler Discs are specially made to be used with the Qiagen Rotor-Gene Q Real-Time Rotary Analyzer. Two models are available: a 72-well format with 100 µL tubes and a 100-well format for reactions up to 25 µL. The discs a"one-piece "plate" equivalent, having vertically oriented wells compatible with automated reaction setup using a robotic liquid handling system.
Affordable price & shipped at room temperature.
A premixed, ready-to-use solution for efficient amplification of DNA templates by PCR.
- 2X Eco-Taq MasterMix contains Taq DNA Polymerase, dNTPs, Mg2+ and Reaction Buffer at optimal concentrations for efficient amplification of DNA templates by PCR, as well as an inert loading dye.
- This pre-mixed formulation saves time and reduces contamination due to the fewer pipetting steps required for PCR set up. To prepare the final PCR, only primers and template DNA need to be added.
- The mix retains all features of Taq DNA Polymerase and can amplify DNA targets up to 5 kb (simple template).
- The elongation velocity is 0.9~1.2kb/min (70~75°C).
- It has 5' to 3' polymerase activity but lacks 3' to 5' exonuclease activity which results in a 3'-dA overhang PCR product.
Features:
- Convenient: Just add primers and template DNA
- High yields of PCR products with minimal optimization.
- High efficiency: saves your time by simplifying the process
- Reproducible: lower contamination risk and pipetting error.
Applications:
- High-throughput PCR.
- Routine PCR with high reproducibility
- Generation of PCR products for TA cloning
Contents:
2X Taq Mix 1ml
Store at -20°C
For research use only
MIDSCI ELISA & Short Term
Specifications:
| Length | 146.05 mm |
| Length (w/ end tabs removed) | 119.05 mm |
| Width | 79.38 mm |
| Overall Thickness | 3.1 mil |
| Adhesive Thickness | 1.1 mil |
| Material | Polyester |
| Adhesive | Medical Grade Acrylic |
| Max. Temperature | 120 °C |
| Min. Temperature | -40 °C |
| Primary Usages | Elisa, Storage or Sample Cover |
ThermalSeal® An Easier to Remove Sealing Film
ThermalSeal® features a moderate strength adhesive for ease of removal.
- Certified DNase- & RNase- free
- Only recommended for structurally rigid polypropylene PCR plates that don’t warp
- A less rigid polypropylene film that minimizes aerosols upon removal
- Features good chemical resistance
- PCR
- General storage
- -40°C to +120°C
This brand is being discontinued and will only be available while supplies last.
Need a great DNA Safe Stain at a great price? Try PR1MA! Click here to order.
- Safest DNA stain by far
- Replaces EthBr in agarose gel electrophoresis
- Detection of DNA and RNA
- Excitation at 290nm & 490 nm
- Emission at 530nm
DNA SafeStain is a new and safe nucleic acid stain for visualization of double-stranded DNA, single-stranded DNA, and RNA in agarose gels. The dyes are developed to replace toxic ethidium bromide (EthBr, a potent mutagen), commonly used in gel electrophoresis for visualization of nucleic acids in agarose gels. DNA SafeStain is non-carcinogenic by the Ames-test. The results are negative in both the mouse marrow chromophilous erthrocyte micronucleus and mouse spermary spermatocyte chromosomal aberration tests.
DNA SafeStain emits green fluorescence when bound to DNA. It has two excitation wavelength peaks when bound to nucleic acid, at 290nm and 490nm and the emission can be detected at 530nm.
Storage:
Store under dark at 4°C or room temperature.
User Instruction:
DNA SafeStain can be used in the exact same way as EtBr in agarose gel electrophoresis. For example, add 100µl to 1 liter of 1X running buffer (1xTAE or 1x TBE), and use this DNA SafeStain containing buffer to make the agarose gel and run the gel.
Special Notes:
1. For best results, dilute the DNA SafeStain 1:10,000 in your gel running buffer and use this dye-containing running buffer to make your agarose gel and to run the gel.
2. As is the case with EtBr; add more DNA SafeStain, if brighter DNA bands are desired. To view the results, any conventional DNA gel viewing light box or gel documentation system should work well with the DNA SafeStain; although, using a LED light instead of a UV light source is preferred due to the harmful nature of UV light.
This Product is For Research Use Only
For the proper disposal of this product, follow University or Company Guidelines.
Web Content Viewer
Actions