Aspire Aspirator

• Compact Design
• Built-in Vacuum Pump
• Adjustable Vacuum Pressure
• Vacuum Gauge
• Safe and Precise Aspiration

The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of laboratory aspirating applications, including removal of media from tissue culture vessels or plates, and supernatants. An ergonomic, hand held aspirating device is included, and holds standard 200 to 300ul disposable pipette tips.

Comes complete with:

• Base with internal vacuum pump
• 2 Liter, Polycarbonate Collection Bottle (autoclavable and break resistant)
• Antibacterial / Hydrophobic Filter
• Silicone Tubing
• Handheld Vacuum Controller
• 2 Pipette cone adapters (for 200 ul pipette tips and 40mm stainless steel)

The collection bottle incorporates a reliable Overflow Protection Valve that closes off the tube to the vacuum in the event of a full bottle. In addition, the replaceable in-line filter protects the vacuum pump from contaminants and any moisture that comes through the bottle. Graduations on the collection bottle indicate the amount of fluid collected and when it's ready to be emptied. The Handheld Vacuum Pipette has an ergonomic design that's comfortable in the hand during prolonged use.  Pressing the button applies the vacuum. The pipette accepts Pasteur pipettes, serological pipettes, and also comes with 2 accessory pipette cones. One cone is designed to accommodate 200/300ul pipette tips, the other has a thin, stainless steel capillary for fine control aspirating. 
 

Specifications 

The Wheaton OmniSpense ELITE and UniSpense PRO are intelligent peristaltic pumps for all your dispensing needs. Whether you are making sterile liquid trasnfers to and from containers or filling vials or titer plates, these pumps will simplify and accelerate your laboratory output.

The systems are operated via a large 5" backlit liquid crystal display and chemical resistant keypad. Options are displayed as large icons for quick operation and easy recognition in national and international markets. The pumps also feature a small footprint and an angled polarized display perfect for use under a fume hood or biological safety cabinet.

Calibration of the units is simplified to a single intuitive calibration screen that walks the user through the process stepwise. This eliminates scrolling through menus and complicated instruction manuals.

The OmniSpense ELITE and UniSpense PRO can be specifically outfitted and programmed for your process. These programs can be saved and recalled at a later time for a quick application turnaround. Both pumps support tubing with different specificaitons and the OmniSpense ELITE can use stacked pump heads or microcassette heads for multiple small volume dosing.

The UniSpense PRO is a dual-speed dedicated dispensing pump designed to accommodate single of multiple filling applications. The OmniSpense ELITE is a variable speed dispensing pump with built-in FLOW mode. The FLOW mode allows for real time tracking of a single liquid transfer. The pump can be paused and restarted for more involved processes.

The OmniSpense ELITE and UniSpense PRO help menus are English, Chinese, French, Japanese, Korean and Spanish language enabled. These menus ensure the icon driven display is easily understood by national and international laboratories.

The OmniSpense ELITE and UniSpense PRO are ideal for any laboratory or clinical setting where accurate and precise dispensing is important.

Features of Wheaton Pumps include:

• Icon Driven User Interface
• Trouble-Free Calibration
• Ultra-High Precision Stepper Motor
• Compact Design
• User-Friendly Operation in Six Languages
• Complies with Industry standards including: UL, CSA, CE, WEEE & RoHS Compliant

Specifications

• For use in the hood, outside the hood, or on the bench
• Great for aspiration or filtration
• Control knob for infinite vacuum setting (-300 mbar to -600 mbar)
• Overflow protection of pump and electronics by a hydrophobic filter at the pump inlet
• Eliminates contamination of lab vacuum lines
• All parts in contact with fluids are autoclavable
• Silent operation
• Excellent for work involving pathogens or biohazardous fluids
• When used with VACUBOY hand operator and attachments, offers unparalleled speed and flexibility when aspirating from any type of vessel from flasks to 96-well plates

The VACUSAFE comfort is a self-contained, multifunctional vacuum aspiration system that offers many benefits over "homemade" systems connected directly to a lab vacuum line or faucet. When used in conjunction with the VACUBOY hand operator, the VACUSAFE comfort provides unparalleled performance, flexibility, and safety when aspirating media, biological fluids, or chemical solutions.

VACUBOY Benefits and Features:

• Time-savings and flexibility particularly when aspirating from multi-well plates
• Dual vacuum speed control either with push button on top, or rear turn setting
• Single, 4-channel, and 8-channel adapters available
• Adapters include disposable pipette tips, Pasteur and serological pipettes, or fixed stainless steel pins

The VACUBOY hand operator is designed to accommodate a variety of aspiration adapters including stainless steel pins, disposable tips, and Pasteur or serological pipettes. Each adapter is designed to perfectly match the physical dimensions of typical laboratory vessels including flasks, bottles, and multi-well plates. It can be used in conjunction with the VACUSAFE aspiration system or a stand-alone upgrade to your current system.

VACUBOY Attachment Options:

• Single stainless steel aspirator (40mm, 150mm, or 280mm)
• 4-channel stainless steel aspirator
• 8-channel stainless steel aspirator
• Single-channel adapter for pipette tip, (w/ or w/o ejector)
• 8-channel adapter for pipette tips, with ejector
• Rubber adapter for Pasteur and serological pipettes

StripSpin™12D

Hermle Z167-M High Speed Microcentrifuge

• Microprocessor with large LCD display
• Electromagnetic lid lock
• Quick access to samples
• Active imbalance identification and cut-off
• Air Cooling System
• Quick Acceleration and Deceleration
• within 14 respectively 16 seconds
• Noise level < 57 dBA, at max. speed
• Easy removal of rotor, without tools
• Manufactured in accordance to International
• Safety Regulations, i.e. IEC 61010

FlexiFuge is a versatile, personal micro-centrifuge for quick, low speed centrifugation. Whisper quiet motor offers two speeds (2000g / 5,000g or 9,200 RPM ) depending on application. Flexifuge can be operated in continuous mode, pulsed for a short burst of rapid centrifugation, or timed to spin from 1-15 minutes.

Regardless of setting, rotors stop once the lid release button is pushed. A ring of LED lights illuminate when the unit is active and can be viewed through the transparent lid. Color can be changed (red, green, blue) or turned off by a switch under the unit.

Flexifuge is supplied with an 8-Place fixed angle rotor for 1.5ml tubes, a rotor for (2) 8x0.2ml PCR tube strips, 8 adapters for 0.5ml tubes and a 4-place rotor to spin 5ml micro-centrifuge tubes.

1 Year Warranty

Our quiet, reliable, and low cost two-stage high vacuum rotary vane pump comes both in 120V and 220V versions with or without a gauge.

Specifications:

Benchmark™ IsoBlock™ Dry Bath

The IsoBlock™ model from Benchmark™ contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removable) lid is designed with a dividing wall; when the lid is closed, this dividing wall acts as a barrier, preventing air transfer between chambers. The control panel features large digital displays of both time and temperature. Any any point, either setting of a block can be adjusted, without affecting the settings of the other block.

A wide variety of blocks are available for accommodating nearly all popular tube sizes. In addition, the unique Quick-Flip™ universal blocks accept tubes from 0.5 to 2 mL and with just a quick flip to the other side, accommodate 0.2 mL tubes or PCR strips.

Specifications

Hermle Z207-A Compact Centrifuge

• The combination rotor holds 4 x 15 mL and 50 mL in the same rotor
• Up to 6,800 rpm and 4,394 x g
• Compact only 11 in. wide
• Unique EZ-Scroll™ touchpad

The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 mL and 4 x 50 mL tubes in the same rotor. With the combination rotor, there's no longer a need to switch rotors, or use adapters to centrifuge 15 mL and 50 mL tubes for tissue culture. You can even process them simultaneously!
 
Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touchpad which gives you ease of control and a modern feel. An advanced microprocessor control allows for setting/displaying the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy-to-use front panel can be used to adjust accel/decel rates, run time, and change the end-of-run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally, the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.

Specifications

LabValues 2025 Promo!

For a limited time, enjoy special pricing on Labnet Mini Microcentrifuges!

See flyer for more details.

Offer cannot be combined with other discounts or institutional pricing.
Offer not valid on previous purchases. Promo valid from 7/15/25 to 12/31/25 or while supplies last.

All terms and conditions apply.

Labnet Mini Microcentrifuge

• Quick release rotor system - no tools needed to exchange rotors
• Electronic braking - Allows for more rapid deceleration, less waiting
• Dual lid switch
• Compact, rugged design

Simple and convenient to operate, the new Labnet mini microcentrifuges feature greater capacity (8-place MCT and 4-place PCR strip rotors), a quick-release rotor system and electronic brake.Once samples are loaded and the lid is closed, the rotor rapidly accelerates to 6,000 rpm, making it an ideal centrifuge for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.

Specifications

The Micro Bead Sterilizer is ideal for the sterilization of small tools (such as forces, scissors, needles, etc.) in which high temperatures (up to 300°C) can be used to eliminate the presence of bacteria, spores, and other microorganisms. The outer casting of the unit remains cool to the touch, even if the sterilizer is used all day. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The sterilizer does not use gas, flame or chemicals, and is safe for use in hoods.  (This product is designed for RESEARCH USE and is not intended for clinical use). 

Featured Benefits:

• Sterilizes forces, needles, and other tools (generally within 15 seconds)
• Digital control, up to 300°C
• Eliminates the danger associated with open flames
• "Tall" model available for the sterilization of larger tools

Specifications
 

Item #	BE1201	BE1202
Temp Range	Adjustable, 100-300°C	Adjustable, 100-300°C
Preheat Time	Approximately 25 minutes (to 300°C)	Approximately 25 minutes (to 300°C)
Chamber Diameters	40 mm	40 mm
Chamber Height	80 mm	140 mm
Exterior Dims (W x D x H)	5.5 x 5.7 x 6.1 In. | 14 x 14.5 x 15.5 cm	5.5 x 5.7 x 8.5 In. | 14 x 14.5 x 21.5 cm
Chamber Bead Capacity	150 g	300 g
Weight	4.4 lbs. | 2 kg.	5.29 lbs. | 2.4 kg.
Electrical	115VAC or 230VAC, 50-60Hz	115VAC or 230VAC, 50-60Hz
Power	120W	250W
Operating Evmnt.	4°C to 45°C	4°C to 45°C
Warranty	2 years	2 years