S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
PR1MA™-Shell Plates - 96-Well, Semi Skirted
Discover the next generation of PCR plates: Rugged Polycarbonate Frame + Polypropylene Wells
Engineered for unparalleled durability, PR1MA™-Shell PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms.
- PR1MA™-Shell sets a new standard in performance and convenience.
- The polycarbonate frame is rigid and flat to facilitate a firm grip by robotic arms and ensure reliable placement
- Polypropylene wells provide optimal thermal transfer and higher reaction efficiency
- White well options enhance the fluorescence signal during qPCR
- Wells are slightly raised to ensure evaporation-proof sealing with film, foil, or strip caps
- ANSI/SBS footprint and well spacing
- Vibrant colors offer a visual distinction between different samples or experiments
- Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free
Proudly made in the USA! Click here for more made in America products!
Cryo-Clear™ Laser Sheets
Cryo-Clear™ labels withstand both long term cryogenic storage conditions and conventional freezer storage. Cryogenic labels are chemically inert with a solvent resistant adhesive that will adhere to cryogenic vials, microtubes, test tubes, glass vials, beakers, and metal racks. Sold in sheets.
Specifications
| Temp. Range | -196°C to 70°C |
| Ideal Use | Cryogenic Vials |
| Length | Varies |
| Width | Varies |
| Color | Clear |
| Layout | 7 Across - 17 Down |
Proudly made in the USA! Click here for more made in America products!
Tough-Tag® Cryo-Babies® on a Roll
Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryo labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.
Tough-Tag® Station
Easily insert new rolls or remove empty boxes. Specially designed top rail holds rolls in place. Allows easy liner trimming. When loaded, station can be used as a writing surface. Also holds 5-Across Tough-Spots®, Bake-Tags®, Teeny Tough-Tags®, and Sidewall Tough-Tags®!
Specifications
| Temp. Range | -320.8 to 176ºF | -196 to 80°C |
| Ideal Use | 0.2 mL PCR Tubes |
| Length | 0.81 In. | 20.57 mm |
| Width | 0.28 In. | 711.2 mm |
| Color | White |
| U of M | Roll |
Proudly made in the USA! Click here for more made in America products!
PR1MA™ CoolCube™
- Maintains 0°C for up to 4 hours
- Also for use as a PCR workstation
- Two sides, ideal for: 1.5 & 2.0 mL microtubes, 0.2 mL PCR tubes & strips, 96 well PCR plates
The PR1MA™ CoolCube™ is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Simply place the CoolCube™ in a freezer overnight and it’s ready for use, keeping samples cold, but not frozen maintaining temperature at approximately 0° C for up to four hours.
Specifications
| Temperature | 0°C for up to 4 hours |
| Capacity (side 1) | 36 x 1.5/2.0 mL tubes |
| Capacity (side 2) | 96 x 0.2 mL tubes, 12 x 0.2mL strips, 1 x 96 well PCR plate, 10 x 1.5/2.0 mL |
| Dimensions (W x D x H) | 5.6 x 5.6 x 2.5 in. | 14.3 x 14.3 x 6.4 cm |
| Weight | 2 lbs | 1 kg |
| Warranty | 2 years |
Proudly made in the USA! Click here for more made in America products!
CoolCube, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities
Laser Microscope Slide Tough-Tag® Sheets
Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes, and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures.
- Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack"
- Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red and Yellow
Specifications
| Temp. Range | -40 to 249.8ºF | -40 to 121°C |
| Ideal Use | Microscope Slides |
| Length | 0.875 In. | 22.23 mm |
| Width | 0.875 In. | 22.23 mm |
| Layout | 8 Across - 12 Down |
| U of M | Sheets |
| Qty | 2,400 Labels |
Proudly made in the USA! Click here for more made in America products!
Waddle into this PCR Promo!
For a limited time, buy 3 cases of select PR1MA™ Polypropylene PCR Plates
(PR-PCR1296, PR-PCR1196) and get one FREE MIDSCI™ Duckie!
Add item MS-RBRSCIDUCK-F to cart when placing qualifying order.
Offer valid until 9/30/25 or while supplies last. Limit one free MIDSCI Duckie per order.
Must include 3 cases of PR1MA Polypropylene PCR Plates and one Duckie item.
No substitutions. Cannot be combined with other offers or discounts.
All terms and conditions apply.
PR1MA™ Non-Skirted PCR Plates
- PR1MA™ PCR Plates have uniformed wells and ultra-thin walls provide optimal heat transfer and reaction efficiency.
- Fits most thermal cyclers.
- High Contrast black alphanumerics for easy well identification.
- Reclosable bags minimize contamination risk and are convenient for opening and closing.
- For use in medical, pharmaceutical, food industry, and molecular biology.
Proudly made in the USA! Click here for more made in America products!
PR1MA™ Autoclavable Boxes
Benefits of PR1MA™ Autoclavable Boxes
- Easy to stack and carry
- Hinged lid
- Fits our easy PR1MA™ reload/refill system
- Won't tip over when you hit the corner tip
- Easy to open with one hand
Proudly made in the USA! Click here for more made in America products!
Waddle into this PCR Promo!
For a limited time, buy 3 cases of select PR1MA™ Polypropylene PCR Plates
(PR-PCR3196, PR-PCR3196-W, PR-PCR33841) and get one FREE MIDSCI™ Duckie!
Add item MS-RBRSCIDUCK-F to cart when placing qualifying order.
Offer valid until 9/30/25 or while supplies last. Limit one free MIDSCI Duckie per order.
Must include 3 cases of PR1MA Polypropylene PCR Plates and one Duckie item.
No substitutions. Cannot be combined with other offers or discounts.
All terms and conditions apply.
PR1MA™ Full-Skirted PCR Plates
- PR1MA™ PCR Plates have uniformed wells and ultra-thin walls provide optimal heat transfer and reaction efficiency.
- Fits most thermal cyclers.
- High Contrast black alphanumerics for easy well identification.
- Reclosable bags minimize contamination risk and are convenient for opening and closing.
- For use in medical, pharmaceutical, food industry, and molecular biology.
- Barcoded versions available upon special order.
- Certified free of detectable RNase, DNase, NA, PCR inhibitors, and tested pyrogen-free.
Proudly made in the USA! Click here for more made in America products!
PR1MA™ Sealing Mats
PR1MA™ 96-Well PCR Sealing Mats are made of silicone, dimensions are 4.67 in. (L) x 2.90 in. (W).
- Pierceable
- Designed for an evaporation-resistant seal to minimize sample loss
- For use in medical, pharmaceutical, food industries, and molecular biology
- Certified free of detectable RNase, DNase, DNA, and PCR inhibitors
Proudly made in the USA! Click here for more made in America products!
Looking for large quantities? You can find them here.
(sold by the master case)
Labcon Zap™ Slik Aerosol Filter Pipette Tips - Refill Lid
ZAP™Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips. These aerosol tips provide you with complete protection from sample carry-over at the same time they reduce sample retention. Incorporating a robotically inserted 10 uM filter with a sponge-like porous pathway, ZAP™Slik tips have such a small pore they even block fluids in the unlikely event that you should over-pipette. And our SuperSlik® polypropylene increases the hydrophobicity of tips surfaces, so they have up to 10 times less fluid retention.
ZAP™Slik Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination. But unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum, toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips, ZAP™ tips can be autoclaved in a steam autoclave, and ZAP™ tips will not wick fluids like cellulose filled aerosol resistant tips. You don't have to worry about how you hold your pipettor. Our ZAP™ tips in sterile racks, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" tips from other pipette tip suppliers you can use ZAP™Slik tips for diagnostic and regulated procedures. And ZAP™Slik tips are RoHS compliant, unlike other low retention tips, so you don't have to worry that additives will migrate into your sample.
- 1171 - 10 uL ZAP™ Slik Pipette Tips
- 1172 - 10 uL Extended Length with TubeGuard™ ZAP™ Slik Pipette Tips
- 1173 - 10 uL Extra-Long ZAP™ Slik Pipette Tips
- 1175 - 20 uL ZAP™ Slik Pipette Tips
- 1143 - 20 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1174 - 100 uL ZAP™ Slik Pipette Tips
- 1179 - 200 uL ZAP™ Slik Pipette Tips
- 1144 - 200 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1146 - 200 uL Wide Orifice ZAP™ Slik Pipette Tips
- 1178 - 300 uL ZAP™ Slik Pipette Tips
- 1142 - 300 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1147 - 300 uL Extended Length ZAP™ Slik Pipette Tips
- 1177 - 1000 uL ZAP™ Slik Pipette Tips
- 1145 - 1000 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1148 - 1000 uL ZAP™ Slik Wide Orifice Pipette Tips
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.
Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.
Proudly made in the USA! Click here for more made in America products!
Looking for large quantities? You can find them here.
(sold by the master case)
Labcon ZAP™ Slik Aerosol Filter Pipette Tips - Hinged Lid
Each style of ZAP™ SLIK Tips is designed from the beginning to fit precisely the range of pipettors listed in the fit charts. We carefully inspect the fitting with the actual pipettors, not just with measuring gauges. This means you won’t have to worry about leaking Tips and you don’t have to use extra force to mount these Tips.
ZAP™ SLIK tips feature a pure 10 uM pore size patented filter without any dyes or additives. The pores on this filter are 100% smaller than those in other aerosol tip brands. A smaller pore guarantees that your pipettor barrel will be kept clean of DNA, radionucleotides, and other contaminants. And this filter works to block fluids without any contaminants in the filter so you never have to worry that your work will be spoiled if your sample contacts the filter.
Real World Lab Tested
Labcon® ZAP™ Slik Tips are developed using their own in-house laboratory and tested on real pipettors. they don't use "pin" gauges or other unrealistic testing methods.
Quality Certification
Certificates are on file by lot number for all test results and available from the certificates page.
Virgin Resin
Only 100% Medical Grade virgin polypropylene resins are used in ZAP™ Slik Tips. No recycled plastics or commodity-grade resins.
FDA Registered Manufacturing
Labcon® is the only major pipet tip supplier to be registered by the U.S. Food and Drug Administration (FDA)
Sustainable Product Design
Like all Labcon® products, Eclipse tips are designed from the beginning with sustainability in mind. These products go far beyond simple recycling to offer real Earth Friendly® solutions.
Proudly made in the USA! Click here for more made in America products!
80 - Well Racks
The popular fraction-collector-plate style racks keep tubes in large wells with conical bottoms. This easy-access design makes this rack ideal for freezer storage and organization. Available in natural, blue, green, pink, yellow, orange, or assorted colors (one of each).
- Holds 1.5 to 2.0 mL microtubes
- Versatile & efficient storage in bright, fluorescent colors
- Durable Polypropylene Construction
- Autoclavable
Specifications
| Dimensions (D x W x H) | 226 x 67 x 28 mm 8.90 x 2.64 x 1.10 in. |
| Max Tube Dimensions | 11 x 26 mm 0.43 x 1.02 in. |
| Tube Size | Holds 1.5 to 2.0 mL Microtubes |
| Formation | 80 Wells, 5 x 16 |
Proudly made in the USA! Click here for more made in America products!
Web Content Viewer
Actions