Hoefer® T-Spacers for Mini Vertical Systems

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems.

Ensure accurate gel thickness and leak-free casting with precision-milled T-spacers. All spacers are precision-machined from durable plastics for high chemical resistance and optimum tensile strength. These spacers provide consistent alignment and long-term durability for mini vertical systems.

Available in multiple lengths (8 cm and 10.5 cm) and thicknesses (0.75 mm, 1.0 mm, and 1.5 mm) to suit your specific gel requirements.

Specifications
 

Item #	Thickness	Length	Width
SE2119T-2-75	0.030 In. | 0.75 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2119T-2-10	0.039 In. | 1 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2119T-2-15	0.059 In. | 1.5 mm	3.15 In. | 8 cm	0.39 In. | 1 cm
SE2619T-2-75	0.03 In. | 0.75 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm
SE2619T-2-10	0.039 In. | 1 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm
SE2619T-2-15	0.059 In. | 1.5 mm	4.13 In. | 10.5 cm	0.39 In. | 1 cm

Lab-Sorb™ Granules

Converts liquid waste to solid waste in seconds. LabSorb™ rapidly absorbs aqueous or mixed aqueous/organic solvent waste. Use at locations connected to septic systems to avoid pouring waste down the drain. Put LabSorb™ at the bottom of your biohazard bin. One jar of LabSorb™ can absorb up to 50 liters of liquid. Retains liquid during autoclaving.

Includes extra durable disposal bags, super absorbent LabSorb™ granules, and a convenient graduated scoop.

• Lab-Sorb™ Kits: SORB-2000 (Small Jar), SORB-2100 (Medium Jar), and SORB-2200 (Large Jar) contain 1 jar of LabSorb™, 25 small disposal bags, 25 twist-ties
• Variety Kit SORB-2300 contains 1 Small LabSorb™ Jar, 15 small disposal bags, 10 medium disposal bags, 5 large disposal bags, 25 twist-ties

Proudly made in the USA! Click here for more made in America products!

Multi-colored 96 Well Orienter

For easy identification of samples in microplates, vertically or horizontally oriented bright colors make it easy to distinguish between columns. Fits most standard flat and round bottom 96-well plates. Available in horizontal and vertical orientations.
 

Proudly made in the USA! Click here for more made in America products!

Glow-Writer Pen

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

• Fine Point Nib- Provides fine writing and greater information density
• Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
• No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging

MDPI-3000 Direct Thermal Printer

• Fine Detail: Print text & barcodes with 300 DPI resolution
• Easy to Use: Comes with Label LIVE design software for Windows and macOS
• Easy Adjustment: Fully adjustable sensor for use with a variety of label sizes
• Wide Print Width: Full-size print up to 4 In. (102 mm)
• High Capacity: Fits roll diameters up to 4.25 In. (108 mm) 

Lab Armor® Beads

- Watch the video in the link above to learn more! 

Lab Armor Beads are dry metallic beads that replace water/ice/oil/sand in baths, giving old equipment a cool, shiny, state-of-the-art upgrade. Eliminates water bath contamination, harmful germicides, and unpleasant maintenance. 

Beads are dry and naturally more resistant to microbial growth than water, and therefore, are less likely to harbor and contribute to transmitting microorganisms in the laboratory. 
  

Lab Armor Beads will help you save time and money. No more hassling with emptying, cleaning, and refilling water baths.

The bath stays on so there is no need to plan around warm-up times. Lab Armor Beads eliminate the worry about low water burnout because there is no water to evaporate.
 

Other Benefits of Lab Armor® Beads: 

• Cleaner working environment.
• Greater organization capabilities as samples are held in place without racks or other accessories.
• Environmentally friendly. 

Why Choose Lab Armor Beads?
 

Any Vessel, Any Angle

Lab Armor Beads prevent distorted data and dangers resulting from inaccurate temperatures, evaporated lab water baths, and water-exposed contaminated samples. The Beads are designed to decrease microbial contamination that can ruin experiments or lead to safety issues in the laboratory.

Organized and Secure

Lab Armor Beads flow fluidly and can conform to all sizes and shapes of vessels placed within the bath. Vessels that are prone to tipping over or floating away no longer require racks, floats, or bottleneck weights to secure them in place. Sample vessels can be conveniently buried into the beads to avoid temperature gradients associated with exposure to room temperature air. Bottles will rest on the surface and conical tubes will stay firmly in place in less than 1/2 inch of Beads.

Specifications

• Temperature range: -80°C to 180°C
• High thermal conductivity
• Non-toxic, non-vaporizing, antimicrobial
• No daily requirement for biocides, germicides, or other cleaners
• No gray water
• Smooth rounded shape allows fluidity and will conform to many sizes and shapes of vessels
• No racks, floats or weights required to hold items in place
• Recyclable*
• Weight 4 Lbs. (1.81 kg) per Liter 

*Must follow biohazard disposal protocols if beads have been used in biohazardous work.

Proudly made in the USA! Click here for more made in America products!

Labcon UrineTime™ II 24 Hour Collection System

• New Two Liter Bottles
• Keyed Bottles More Stable
• New Package Options
• Enables Faster Diagnosis

UrineTime™ II from Labcon improves on an already great product. The new 2 L keyed bottles are much more stable than earlier models and with their keyed sides they now stay firmly oriented and locked together.

UrineTime™ II Solves an Old Problem
A problem occurs when more than one assay is needed for a single 24-hour urine sample and the assays require different preparations or preservatives. Unlike the usual method of collecting samples over two days, the UrineTime™ II reduces the time it takes to collect samples and speeds the diagnosis and treatment process.

UrineTime™ II is Convenient
Understanding and using UrineTime™ II is convenient for patients. And since their treatment can begin a full day earlier better care is assured.

Cost
UrineTime™ II is provided with everything needed to collect two 24 hour samples. Staff time is reduced since labels, packaging and transport accessories are provided in a neat package. And UrineTime™ II is perfect for outpatient use so there is no need to ensure compliance through admission.

Proudly made in the USA! Click here for more made in America products!
  

Labcon C-Pette™ Blood Transfer Dispenser

• For safe and efficient blood dispensing
• Ideal for Point-of-Care (POC) use with any analyzer
• Minimizes aerosols
• Reduces the risk of lab-acquired infections
• Stainless steel canula

C-Pette™ blood collection tube dispenser for point of care testing instruments. Dispenses one drop of blood onto test cartridge or cassette. Dispenses blood drops easy with no need to open collection tubes. Fits standard glass or plastic blood tubes with rubber stoppers. Made of polystyrene and Stainless steel. Not Autoclavable. 

Proudly made in the USA! Click here for more made in America products!
 

Labcon Tip Top™ Dispenser Caps

• Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
• Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
• Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
• Medical Grade Resins: USP Class medical grade resins and packaging.

Safe Dispensing of Blood Samples
 
Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16 mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.

Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.

The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.

Fits standard 13 x 100 and 16 x 100 collection tubes.

Proudly made in the USA! Click here for more made in America products!
 

Labcon Security Cups for Urine or Specimen Collection

• 100 mL Cups
• Sample spouts may be cut with scissors or pierced with a syringe
• Impact and pressure resistant seal

These security containers are designed to provide secure and reliable tamper-proof seals for specimens in transit or storage. After specimen collection the screw cap is tightened first by hand, then by the special wrench, which engages teeth on the lids rim to create a locked and leak-proof seal. To access the specimen for testing procedures, large or small sample spouts may be cut with scissors or pierced with a syringe. Spouts can be resealed with the large or small plugs and returned to storage for further testing. The impact-resistant, durably constructed, and pressure-resistant seal offers excellent protection during handling and transport. Made of non-reactive polyethylene resin.

Proudly made in the USA! Click here for more made in America products!
 

Labcon MetalFree® Centrifuge Tubes

• Made of 100% medical grade ultra low metal virgin resins
• Certified below one part per billion (<1ppb) for trace metals
• Natural colorant-free flat caps
• Autoclavable (122°C) & Freezable (-80°C)

Labcon’s MetalFree® centrifuge tubes are specifically processed to ensure that common trace metals and elements that can interfere with experiments are below an ICP-MS detection level of one part per billion (<1ppb). These tubes are perfect for storage of samples and for applications requiring the assurance of low background metals.

Metals included in testing are: Calcium, Magnesium, Zinc, Iron, Copper, Manganese, Aluminum, Silicon, Nickel, Vanadium, Sodium, Phosphorous, Cobalt, Chromium, Potassium, Lithium, Selenium, Cadmium, Mercury, Arsenic, and Lead.

All package versions are sterilized with a validated and approved ISO 11137 method. Racked tubes are packaged in recyclable fiber racks.

Proudly made in the USA! Click here for more made in America products!
 

Labcon SuperClear® 5 mL Centrifuge Tubes with Attached Caps

• Attached flat snap caps
• Molded graduations
• Writing surface
• Centrifuging to 25,000 x G
• Autoclavable (122°C) and freezable (-80°C)

5 mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15 mL tubes. Designed to fit the same rotors as our 15 mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes.

The interior surfaces are ultra-smooth with low retention characteristics. Lab testing confirms the superior performance of SuperClear® tubes in light transmission compared to other brands. SuperClear® tubes are more than twice as effective at transmitting light than other brands of 5 mL centrifuge tubes.

SuperClear® tubes feature an extra-thick and durable wall that can withstand centrifugation to 25,000 x G, more than twice some other brands. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces.

Tubes have flat, pierceable caps and a side writing surface and are packaged In resealable bags.

Proudly made in the USA! Click here for more made in America products!